Teledyne FLIR MR265 | Moisture measuring device and thermal imaging camera, 2.8 “display, resolution 160 x 120 px, with MSX

Manufacturer number: MR265

Teledyne FLIR MR265 | Moisture measuring device and thermal imaging camera, 2.8 “display, resolution 160 x 120 px, with MSX.

  • Display type: QVGA (320 x 240 pixels) 2.8 inch color TFT graphic display
  • Camera detector: FLIR Lepton Microbolometer
  • Minimum focus distance thermal image: 10 cm
  • MSX: Overlays visible details over the thermal image at full resolution
  • Field of view [W × H]: Thermal FOV 57 ° x 44 °
  • Spectral characteristics: 8 to 14 µm
  • Thermal image resolution [W × H]: 19,200 pixels (160 x 120)
  • Thermal image palettes: Ironbow, Rainbow, Arctic, White-Hot, Black-Hot
  • Image refresh rate: 9 Hz
  • Image modes: IR, visible light, MSX®
  • Digital camera: 2 MP, 83 ° FOV (70.5 ° HFOV x 56 ° VFOV)
  • Image calibration: Automatic with manual scale lock function
  • Measurement resolution: 0.1
  • Measuring range of non-invasive moisture measurement: 0 to 100
  • Non-invasive measuring depth: max. 19 mm
  • Response time with external pin sensor: 750 ms
  • Response time non-invasive: 100 ms
  • Pen moisture: measuring range 7% to 30% / basic accuracy ± 1.5% MC / measuring range 30% to 100% / basic accuracy for reference only
  • Sensitivity: <150 mK
  • Pen moisture groups: 11 material groups
  • Laser alignment: Single laser pointer on the center of the thermal image
  • Image storage capacity: 15,000 images
  • Saved Images File Format: Radiometric JPEG Images
  • Battery life - continuous use: Max. 10 hours
  • Battery: Lithium polymer battery 3.7 V, 5,400 mAh LiPo
  • Internal memory: 8 GB
  • Automatic shutdown: Programmable: off, 5, 10, 20 or 30 minutes
  • Drop resistance test: 2 m
  • Guarantee: 10 years

Independent Consulting

More than 50 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Documents & Downloads

Description

MR265 | Moisture measuring device and thermal imaging camera, 2.8 “display, resolution 160 x 120 px, with MSX

The Teledyne FLIR MR265 is a professional pen and penless moisture meter with a built-in thermal imaging camera that shows you exactly where to investigate anomalies related to moisture, air leaks and insulation gaps. With IGM (Infrared Guided Measurement) and MSX (Multi-Spectral Dynamic Imaging Enhancement) technology, the MR265 helps you scan and target problem areas quickly, and guides you specifically to where you can safely take measurements, analyze readings and problems can fix. With FLIR Thermal Studio, you can then create professional reports with findings and proof of repair and pass them on - so that your customers can be certain that mold, rot or moisture problems have been solved.

Locate problems at the source with the built-in 160 x 120 (19,200 pixel) thermal imaging camera , 2 MP video camera , bright work light, laser and MSX that superimposes visual details over thermal images.

Assess humidity with penless or pen sensors and choose from a variety of optional, compatible probe accessories for flexibility and convenience at work.

Document thermal and visual images before and after repairs and generate professional reports with FLIR Thermal Studio to better identify problems and repairs.

Lieferumfang

  • FLIR MR265
  • FLIR MR02 standard pen probe
  • quick start Guide
  • international USB charger
  • USB cable
  • Lanyard

Accessoires (15 products )

Teledyne FLIR MR09
Skirting board sensor, penetration depth 15cm for MR77 / MR160 / MR176 moisture meter
Delivery time upon request
€239.00
Teledyne FLIR MR04
Telescopic rod for MR05 / MR06 / MR08 contact sensors
Delivery time upon request
€87.00
Teledyne FLIR MR08
Contact sensor humidity set for MR160, MR176 wired, hammer version and for holes
Delivery time upon request
€519.00
Teledyne FLIR MR07
Contact sensor humidity for MR160, MR176 wired, as hammer version
Delivery time upon request
€349.00
Teledyne FLIR MR06
Contact sensor humidity for MR160, MR176 wired, for holes in the wall
Delivery time upon request
€219.00
Teledyne FLIR MR10-2
Protective case for FLIR moisture meters
Delivery time upon request
€58.00
Teledyne FLIR MR12
Humidity sensor with ball probe, hand-held device with cable connection, humidity sensor
Delivery time upon request
€179.00
Teledyne FLIR MR-PINS2-10
Replacement tips moisture for MR176, 10 pieces for MR06, MR07, MR08, length: 2 inch
Delivery time upon request
€249.00
Teledyne FLIR MR05
Contact sensor humidity for MR160, MR176 wired
Delivery time upon request
€94.00
Teledyne FLIR MR-PINS4
Replacement tips moisture for MR176, 1 piece for MR06, MR07, MR08, length: 4 inch
Delivery time upon request
€42.00
Teledyne FLIR MR02
MR77 moisture measuring pen, replacement for MR77
Delivery time upon request
€37.00
Teledyne FLIR MR-PINS2
Replacement tips moisture for MR176, 1 piece for MR06, MR07, MR08, length: 2 inch
Delivery time upon request
€29.00
Teledyne FLIR MR-PINS6
Replacement tips moisture for MR176, 1 piece for MR06, MR07, MR08, length: 6 inch
Delivery time upon request
€58.00
Teledyne FLIR T300341
FLIR Thermal Studio Standard 12 Month License
Delivery time upon request
€229.00
Teledyne FLIR T300243
FLIR Thermal Studio Pro 12 month license
2 in stock. Ready to ship in 1 business day
€459.00

Recommendations (2 products )

Teledyne FLIR T300243
FLIR Thermal Studio Pro 12 month license
2 in stock. Ready to ship in 1 business day
€459.00
Teledyne FLIR T300341
FLIR Thermal Studio Standard 12 Month License
Delivery time upon request
€229.00

Probes (6 products )

Teledyne FLIR MR-PINS2
Replacement tips moisture for MR176, 1 piece for MR06, MR07, MR08, length: 2 inch
Delivery time upon request
€29.00
Teledyne FLIR MR-PINS2-10
Replacement tips moisture for MR176, 10 pieces for MR06, MR07, MR08, length: 2 inch
Delivery time upon request
€249.00
Teledyne FLIR MR-PINS4
Replacement tips moisture for MR176, 1 piece for MR06, MR07, MR08, length: 4 inch
Delivery time upon request
€42.00
Teledyne FLIR MR-PINS6
Replacement tips moisture for MR176, 1 piece for MR06, MR07, MR08, length: 6 inch
Delivery time upon request
€58.00
Teledyne FLIR MR05
Contact sensor humidity for MR160, MR176 wired
Delivery time upon request
€94.00
Teledyne FLIR MR02
MR77 moisture measuring pen, replacement for MR77
Delivery time upon request
€37.00

News and Knowledge

Future & Trends

The discussion about the "future of sustainable energy" and the question of how the energy supply can be secured in the ...

23/08/2023
Reading time 3 Min.
185
0

About the Manufacturer

Teledyne FLIR
Teledyne FLIR is the world's largest manufacturer of thermal imaging cameras and thermographic instruments. Teledyne FLIR covers an incredibly wide range and has the optimal thermal imaging camera for every application, whether construction, research and development or industrial manufacturing. Since 2010 dataTec is Platinum Distributor of FLIR and, of course, now of Teledyne FLIR.

Last Seen Products

Product added to compare
Product Compare added Product Compare