#statusMessage#
Do you want to start the compare now?
#statusMessage#
Do you want to start the compare now?
With the increasing importance of renewable energies in the wake of climate change, solar energy is moving further into ...
The complexity of military radios and the often harsh weather conditions have a negative impact on the reliability of ra...
Automation with thermal imaging technology has proven to be a reliable solution for quality control in various industrie...
In diesem exklusiven Whitepaper erfahren Sie, wie Sie mit der richtigen Messtechnik arbeiten: ✔ Sie realisieren ein Test...
Manufacturer number: RSA607A
Amplitude range: | +30 dBm to -160 dBm |
---|---|
Analysis bandwidth (MHz): | 40 |
Article number: | RSA607A |
DANL Displayed Average Noise: | ca. -160 dBm/Hz |
Demodulations: | AM, FM, φM |
Detectors: | Peak, RMS, Quasi-Peak |
Dimensions (L x W x H) (mm): | 358,6 x 222,3 x 75 |
Dynamics: | 190 dB |
Filter bandwidths: | 200 Hz, 9 kHz, 120 kHz, 1 MHz EMI optional |
Frequency stability: | ±0.08 ppm, with GNSS 0.025 ppm |
Interfaces: | USB |
Measurement functions: | optional: General modulation analysis (27 modulation types, including 16/32/64/256 QAM, QPSK, O-QPSK, GMSK, FSK, APSK) P25 analysis of signals phase I and phase 2 WLAN analysis of 802.11a/b/g/j/p, 802.11n, 802.11ac Measurement of identifier and RF for LTE |
Model: | RSA607A |
Resolution bandwidth: | 1.18 Hz to 8 MHz |
SSB phase noise: | -94 dBc/Hz @ 1 GHz (10 kHz carrier offset) |
Screen size: | no |
Screen type: | no |
Special features: | USB device, real-time 40 MHz, EMC analysis option, signal analysis option, GPS receiver |
Sweep: | linear, logarithmic |
Tracking-Generator: | optional |
Warranty (years): | 3 |
Weight (kg): | 2.79 |
max. Frequency range (GHz): | 7.5 |
min. Frequency range (kHz): | 9 |
With the RSA600 series, engineers have the real-time spectrum analysis and wide analysis bandwidth they need to solve problems in the characterization, validation and manufacture of their circuit designs.
The heart of the system is the USB RF spectrum analyzer, which detects bandwidths of 40 MHz very precisely even under harsh environmental conditions. Thanks to the dynamic range of 70 dB and the upper frequency limit of 7.5 GHz, you can comprehensively characterize signals with a bandwidth of up to 40 MHz.
The USB form factor shifts processing power to a PC of your choice, so you can decide when you need more processing power or storage.
The optional tracking generator enables gain and loss measurements for quick checking of filters, amplifiers, duplexers and other components. And you can take cable and antenna measurements of standing wave ratio, reflection loss, distance to defect and cable loss as required.