Tektronix MDO34 | MDO 3 series mixed domain oscilloscope, basic device, 4 analog channels
Manufacturer number: MDO34
On Request
Tektronix MDO34 | MDO 3 series mixed domain oscilloscope, basic device, 4 analog channels.
- Number of channels: 4 analog channels, optional: 16 digital logic channels (with logic probe)
- Analog bandwidth: 100 MHz, 200 MHz, 350 MHz, 500 MHz or 1 GHz (optional)
- Impedance: 50 Ω ± 1%, 1 MΩ ± 1%
- ADC resolution: 8 bit, high-resolution mode: 11 bit
- Sampling rate: 2.5 GSa / s on each channel
- Signal acquisition rate:> 280,000 wfm / s
- Acquisition memory: 10 million points
- Integrated digital voltmeter: 4 digits
- Integrated trigger frequency counter: 5-digit frequency measurements
- Optional spectrum analyzer: frequency range 9 kHz to 1 or 3 GHz, bandwidth up to 3 GHz
- Optional arbitrary signal and function generator: 13 predefined signal types, up to 50 MHz signal generation (arbitrary, sine, square, pulse, ramp, triangle, DC level, Gauss, Lorentz, exponential rise / fall, sin (x) / x, white noise , Cardiac sinus, cardiac)
- Acquisition modes: sampling, peak value acquisition, mean value, envelope curve, hi-res, FastAcq, roll mode
- Trigger types: edge, pulse width, runtime, timeout, logic, setup + hold, rise / fall time, parallel bus, video
- Optional triggering, decoding and analysis of serial buses: I2C, SPI, RS-232/422/485 / UART, USB 2.0, CAN, CAN FD, LIN, FlexRay, MIL-STD-1553, ARINC429, audio standards
- 30 automatic measurements, up to 4 measurements can be displayed simultaneously
- Optional analysis functions: spectrum analysis, performance analysis
- Math functions: arithmetic base signal calculation, FFT, advanced functions
- 11.6-inch LCD touchscreen with HD resolution (39.5 cm screen diagonal)
- Interfaces: USB 2.0 (host), USB 2.0 (devices), LAN, HDMI for external monitor
- Power supply: 100 to 240 V AC, 50/60 and 400 Hz
- Dimensions: W 370 × H 252 × D 148.6 mm
- Weight: 5.3 kg
- Warranty: 3 years
Technical Data
Article number: | MDO34 |
---|---|
Counter: | Yes |
DVM: | Yes (free after product registration) |
Dimensions (L x W x H) (mm): | 148,6 x 370 x 252 |
Function generator: | Optional: AFG |
Interfaces: | USB, LAN |
Model: | MDO34 |
Number of channels: | 4 |
Samplerate: | 5 GSa/s |
Screen size: | 29,5 cm |
Screen type: | 1920 x 1080, HD Touchscreen |
Signal acquisition rate: | 280.000 wfms/s |
Special features: | Bandwidth upgrade up to 1GHz 1GHz Spectrum Analyzer |
Storage depth: | 10 MPts |
Triggertypes: | Edge, Sequence (B-trigger), Pulse Width, Timeout, Runt, Logic, Setup and Hold, Rise/Fall Time, Video Optional: Parallel |
Vertical resolution: | 8-bit |
Warranty (years): | 3 |
Weight (kg): | 5.31 |
Documents & Downloads
Description
MDO34 | MDO 3 series mixed domain oscilloscope, basic device, 4 analog channels
Compact design, powerful signal acquisition and efficient signal analysis: With the oscilloscope MDO34 you get extensive analysis tools for fast design characterization and identification of signal anomalies. With over 125 trigger combinations, you can quickly trace the cause of signal errors. The large recording length of up to 10 million points enables extensive recording of all signal events.
For mixed signal applications, the MDO34 offers 16 digital channels (with an optional logic analyzer) in addition to the two analog channels, thus enabling the simultaneous display of analog and digital signals. In addition, the MDO34 has an integrated, hardware-based spectrum analyzer with a frequency range from 9 kHz to 1 or 3 GHz, which supports signal analysis for IoT applications and other common radio standards.
Application areas:
- Embedded design and IoT: Debugging at system level for the most common serial buses
- Power design: reliable and reproducible measurement of voltage, current and power
- Education: combined measurement of analog / digital signals and RF measurements as well as signal source in a single device with integrated help functions for electronic basics
- Manufacturing test and troubleshooting: space savings and reduced costs by integrating multiple device functions in one device
- Service, installation and maintenance: analysis functions for analog and digital signals as well as spectrum analysis in a compact, portable design for optimal flexibility
Digital voltmeter, arbitrary function generator and performance analysis:
The MDO34 oscilloscope offers an integrated 4-digit digital voltmeter (DVM) and a 5-digit trigger frequency counter for the precise display of the frequency of the executed trigger event. Each of the analog inputs can serve as a source for the voltmeter. The same probes are used for this as for the use of the oscilloscope. The MDO Series 3 also has an optional, integrated arbitrary function generator (AFG), which is ideally suited for the simulation of sensor signals or for generating noise signals when carrying out limit value tests. The signal generator enables the output of predefined signals up to 50 MHz and offers 128,000-point recording for loading signals from an internally stored file, from a USB storage device or an external PC. The optional performance analysis package enables fast and reproducible analyzes of performance quality, harmonics, switching loss, modulation, ripple as well as efficiency, amplitudes or time measurements.
Triggering and analysis of serial protocols:
The Series 3 MDO optionally offers a comprehensive set of reliable tools for common serial buses such as I2C, SPI, RS-232/422/485 / UART, USB2.0, CAN, CAN FD, LIN, FlexRay, MIL-STD-1553 , ARINC429 and I2S / LJ / RJ / TDM. With serial protocol triggering you can trigger on certain packet contents, e.g. B. package start, specific address, unique identifier or error. The bus signal is time-correlated to all other signals displayed, so that the timing relationships between the different parts of the tested system are easy to determine. Decoding tables provide a tabular view of all decoded packets from one acquisition.
Lieferumfang
- MDO34 oscilloscope
- 2x TP0250, passive probe, 250 MHz (for device bandwidth 100/200 MHz), 2x TPP0500B, passive probe, 500 MHz (for device bandwidth 350 MHz to 1 GHz)
- P6316 logic probe (with option 3-MSO)
- Installation and safety manual
- Accessory bag
- Calibration certificate
- Power cord
Accessoires (70 products )
Alternate products (7 products )
Recommendations (31 products )
Options (13 products )
Probes (20 products )
Offers (1 product )
News and Knowledge
Navigating through the range of available specifications, options and capabilities can be challenging. There are a lot o...