SPS RL42-L | High voltage relay 5000VAC / max. 30A number of poles 2, coil 24VDC / 0.07A (energy saving)
Manufacturer number: RL42-L
PLC RL42-L | High voltage relay 5,000 V / max. 30 A Number of poles 2, coil 24 V DC / 0.07 A.
- Monostable DC relay
- Switching capacity max. 5000 V (ohmic load)
- Test voltage: contacts max. 8 kV DC
- Isolation voltage max. 5000 V
- Switching current max. 10 AAC
- Continuous current max. 30 AAC
- Switching frequency max. 3 / sec
- Mechanical switching cycles 5 * 106
- Basic body made of plastic
- Contact arrangement: 2 changeover contacts
- Width: 78 mm
- Height: 55 mm
- Depth: 48 mm
- Weight: approx. 300 g
- Excitation coil: 24 VDC / 0.07 A
Note: You need the MC22 mounting clip to attach to a 35mm top-hat rail
Documents & Downloads
Description
RL42-L | High voltage relay 5000VAC / max. 30A number of poles 2, coil 24VDC / 0.07A (energy saving)
The RL 42-L (L = Low Current) high-voltage relay was developed on the basis of the long-established RL 42. During development, particular emphasis was placed on the lowest possible power consumption. The power consumption for the use of the low current variant is just 30% compared to conventional HV relays. This can be ensured by a lower control power with the same switching parameters. Other advantages that result from this are lower power loss and less heat with large relay matrices. The coil control works with constant current - regardless of the control voltage. The RL 42-L high-voltage relay requires only 1.7 watts.
News and Knowledge
Thomas Schleich is an engineer, an expounder of ideas, a free spirit – and a first-class speaker at the dataTec Academy....