Go to homepage
  Quickly and Easily Request a Quote!
  Free Shipping for Orders higher than 50€!
  Independent Consulting!

Product Comparison 0

Shopping Cart
Show all categories Spectrum Analyzer Accessories Back

Schwarzbeck NNHV8123-400 | High-voltage network simulation (LISN), CISPR 25 / BMW GS95025-1 400 A, 1000 V DC, socket type-N

Manufacturer number: NNHV8123-400

Schwarzbeck NNHV8123-400
Delivery time upon request

On Request

or choose one of the following options:
Product inquiries
Highlights Description

Schwarzbeck NNHV8123-400 | High-voltage line simulation (Line Impedance Stabilization Network / LISN), CISPR 25 / BMW GS95025-1 400 A, 1000 V DC, type-N socket.

  • Frequency range: 0.1-150 MHz
  • Max. Continuous operating current: 250 A
  • Max. Current (briefly): 500 A
  • Max. Mains voltage (DC): 1000 V
  • Max. Mains voltage (50/60 Hz AC): 700 Vrms
  • Max. Mains voltage (400 Hz AC): 300 Vrms
  • Replica impedance: 5 μH || 50 Ω (+/- 10%)
  • Coil winding resistance: <1.3 mΩ
  • Impedance (50 Hz): 2 mΩ
  • Impedance (400 Hz): 12.6 mΩ
  • HV cable clamping range: 4 - 15 mm
  • Measuring connection: N-connector
  • Dimensions, housing (W x H x D): 220 x 225 x 260 mm
  • Weight: 6 kg

Independent Consulting

More than 50 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Description

NNHV8123-400 | High-voltage network simulation (LISN), CISPR 25 / BMW GS95025-1 400 A, 1000 V DC, socket type-N

The unbalanced, single-pole high-voltage electrical system replica NNHV8123-400 according to CISPR25 planned Edition4 or BMWGS95025-1 can be used to measure the interference voltage in the HF-VHF range from 0.1 MHz to approx. 150 MHz on shielded cables in the field of electromobility (HEV, EV) . An external 50Ω load resistor is required for BCI tests.

The simulation impedance is essentially formed by connecting an inductor in parallel with the input resistance of the measuring receiver: 5 μH || 50 Ω.

The network simulation is intended for installation in pairs in an HVSE8600 screen housing. Each NNHV8123-400 forms a path. Usually two paths are required for HV + and HV-. The device under test is connected to the terminal on the front panel. The feeding takes place on the back. The shield of the HV cable is connected to the bushing of the shield housing HVSE8600.

The permissible continuous current consumption of the device under test is 250 A, over 500 A can be drawn for a short time

About the Manufacturer

Schwarzbeck
Schwarzbeck
Schwarzbeck is an internationally active manufacturer of measuring electronics, with a focus on the development and production of EMC measuring technology.
Read more

Last Seen Products

Product added to compare
Product Compare added Product Compare