Rohde&Schwarz RTM3004 | Oscilloscope basic unit, 4 channels, touch display, USB, LAN, 100 MHz (opt. up to 1GHz), 5 GSa/s, 10 bit, 40MPts (1335.8794.04)
Manufacturer number: 1335.8794.04
Rohde & Schwarz 1335.8794.04 | RTM3004 oscilloscope basic device, 4 channel, touch display, USB, LAN, 100 MHz (opt. Up to 1GHz), 5 GSa / s, 10 bit, 40MPts.
- Bandwidth: 100 MHz to 1 GHz
- Sampling rate: up to 5 Gsample / s
- Memory depth: up to 80 Msample
- A / D converter resolution: 10 bit
- Display: 10.1 "capacitive touchscreen
- Warranty: 3 years
Technical Data
Article number: | 1335.8794.04 |
---|---|
Bandwidth (MHz): | 100 |
Counter: | Yes |
DVM: | Yes |
Dimensions (L x W x H) (mm): | 152 x 390 x 220 |
Function generator: | Optional: ARB / 4-bit-Muster |
Interfaces: | USB, LAN |
Model: | RTM3004 |
Number of channels: | 4 |
Samplerate: | 5 GSa/s |
Screen size: | 25,6 cm |
Screen type: | 1280 x 800, Touchscreen |
Segmentable memory: | Yes |
Signal acquisition rate: | 64.000 wfms/s |
Special features: | Bandwidth upgrade up to 1GHz optional: Upgrade to 400Msample segmented memory |
Storage depth: | 80 MPts |
Triggertypes: | Edge trigger A, Trigger A sensitivity hysteresis mode automatic, Edge trigger A and B, Width, Timeout, Video, Pattern, Runt, Rise time, fall time, Serial bus |
Vertical resolution: | 10-bit |
Warranty (years): | 3 |
Weight (kg): | 3.3 |
Documents & Downloads
Description
RTM3004 | Oscilloscope basic unit, 4 channels, touch display, USB, LAN, 100 MHz (opt. up to 1GHz), 5 GSa/s, 10 bit, 40MPts (1335.8794.04)
The RTM3000 series oscilloscope from Rohde & Schwarz offers a 10-bit analog-to-digital conversion, up to 80 MSample memory depth and a touchscreen display. The large touchscreen display with a diagonal of 25.6 cm (10.1 inches) offers a resolution of 1280 x 800 points and is therefore one of the best in this oscilloscope class. Equipped with the touch function and an intuitive operating concept, you can switch between menus as required or set the scaling, zoom or curve shapes can be shifted on the display.
The 10-bit analog-to-digital conversion leads to a fourfold improvement in the signal display compared to an 8-bit oscilloscope. The signals are displayed much sharper and fine signal details can be seen.
40 MSample memory depth is available per channel. If the interleave mode is switched on, there are even 80 MSample, which leads to a double signal observation period. Overall, this is a multiple of what conventional oscilloscopes in this price range offer.
This is not the only characteristic of the R&S RTM3000 family of oscilloscopes. Additional functions are integrated / optional such as a logic analyzer, protocol analyzer, a spectrum analyzer, a function generator, a bit pattern generator and a digital voltmeter. In addition, special modes for frequency analysis, mask testing and for data acquisition of long measurement sequences are integrated, which simplifies troubleshooting in electronic systems.
With a sampling rate of up to 5 GS / s and a memory depth of up to 80 MSa, the RTM3000 oscilloscope from Rohde & Schwarz is one of the best on the market. With a signal acquisition rate of 64,000 waveforms / s, signal errors can be found quickly and reliably. The integrated standard tools such as QuickMeas, mask test, FFT (Fast Fourier Transformation), math functions, cursor functions and automatic measurements including statistics enable effective measurements and quickly lead to a result.
This oscilloscope meets the repeated demand for investment security and for an attractive price.
Choose the bandwidth you need: For this basic device with 100 MHz, select the bandwidth that is optimally tailored to your application and simply order it as an option that can be retrofitted. So you not only benefit from shorter delivery times, but also configure your oscilloscope optimally at any time to your measurement requirements.
Lieferumfang
- 4 x RT-ZP05S passive probe
- Power cord
News and Knowledge
Navigating through the range of available specifications, options and capabilities can be challenging. There are a lot o...