Rohde&Schwarz RTM3K-02M | Oscilloscope, MSO, 2+16-channel, 100 MHz, 10 bit, 40 (80) Mpts (1335.8794P03)
Manufacturer number: 1335.8794P03
Rohde & Schwarz Value Instruments RTM3002 | Mixed-signal oscilloscope 2- / 16-channel 100 MHz (expandable 200, 350, 500 MHz, 1 GHz), 5 GSa / s, up to 80 Mpts memory and 10-bit vertical resolution for sharper measurement curves with more signal details.
- 2 analog channels with a bandwidth of 100 MHz (expandable to 200, 350, 500 MHz, 1 GHz)
- Input impedance: 50 Ω / 1 MΩ with Rohde & Schwarz probe interface / BNC interface / read-out
- Input sensitivity: 500 µV / div to 10 V / div
- 16 digital channels up to 5 GSa / s, 40 MSa memory
- 10 bit vertical resolution (up to 16 bit with reduced sampling rate)
- Sampling rate: 5 GSa / s per channel
- Maximum memory depth: 40 MSa (per channel, 1 channel active); 80 MSa interleaved, 400 MSa (standard in "Segmented Memory" mode)
- Signal acquisition rate: 64,000 curves / s
- Analysis function for soft start verification for power supplies
- Various trigger options: edge, width, video (PAL, NTSC, SECAM, PAL-M, SDTV 576i, HDTV 720p, HDTV 1080i, HDTV 1080p), pattern, line, serial bus
- 31 integrated auto measurement functions such as peak-to-peak voltage, pos. peak, neg. peak, rise time, fall time, mean value, RMS value, time, period, frequency etc.
- Built-in 3-digit digital voltmeter
- Logic analyzer (MSO) with 16 digital channels
- Frequency analysis (FFT), math functions, mask test
- Optional: history and segmented memory mode (400 MSa)
- Optional spectrum analyzer
- Optional protocol analyzer / trigger for I²C, SPI, UART / RS-232 / RS-422 / RS-485, CAN, LIN, MIL-STD-1553, ARINC 429
- Optional function generator and bit pattern generator
- WXGA TFT touch display: 25.6 cm (10.1 inch) screen diagonal, resolution: 1280 × 800 pixels, the functions can also be called up in parallel using the controls
- Interfaces: USB 2.0 host, USB 2.0 device, LAN
- Noise level: only 28.3 dB (A)
- Connection voltage: 100 to 240 V AC, 50 - 60 Hz
- Dimensions: W 390 × H 220 × D 152 mm // Weight: 3.3 kg
- 3 year guarantee
Technical Data
Article number: | 1335.8794P03 |
---|---|
Bandwidth (MHz): | 100 |
Counter: | Yes |
DVM: | Yes |
Dimensions (L x W x H) (mm): | 152 x 390 x 220 |
Function generator: | Optional: ARB / 4-bit-Muster |
Interfaces: | USB, LAN |
Model: | RTM3K-02M |
Number of channels: | 2 |
Number of digital channels: | 16 |
Samplerate: | 5 GSa/s |
Screen size: | 25,6 cm |
Screen type: | 1280 x 800, Touchscreen |
Segmentable memory: | Yes |
Signal acquisition rate: | 64.000 wfms/s |
Special features: | Bandwidth upgrade up to 1GHz optional: Upgrade to 400Msample segmented memory |
Storage depth: | 80 MPts |
Triggertypes: | Edge trigger A, Trigger A sensitivity hysteresis mode automatic, Edge trigger A and B, Width, Timeout, Video, Pattern, Runt, Rise time, fall time, Serial bus |
Vertical resolution: | 10-bit |
Warranty (years): | 3 |
Weight (kg): | 3.3 |
Documents & Downloads
Description
RTM3K-02M | Oscilloscope, MSO, 2+16-channel, 100 MHz, 10 bit, 40 (80) Mpts (1335.8794P03)
The RTM3000 series oscilloscopes from Rohde & Schwarz offer a 10-bit analog-to-digital conversion with a memory depth of up to 40 MSa per channel. Signals are displayed very sharply, so that even fine signal details are easy to see. With the interleave mode, even 80 MSa memory depth can be reached, which corresponds to twice the signal observation period.
The large touch display with an image diagonal of 25.6 cm (10.1 inches) and a resolution of 1280 x 800 pixels is one of the best in this oscilloscope class. The touch function in connection with the intuitive operating concept makes it particularly easy to switch between the menus, set the scaling, zoom or move the curves on the display.
The RTM3002 oscilloscope has extensive integrated and optional functions as a logic analyzer, protocol analyzer, spectrum analyzer, function generator, bit pattern generator and digital voltmeter. Furthermore, special modes for frequency analysis, for mask tests and for data acquisition of long measurement sequences are integrated, which simplifies troubleshooting in electronic systems. With a signal acquisition rate of 64,000 waveforms / s, signal errors can be found quickly and reliably. The integrated standard tools such as QuickMeas, mask test, FFT (Fast Fourier Transformation), math functions, cursor functions and automatic measurements including statistics enable effective measurements and quickly lead to a result.
Soft start analysis for power supplies
For developers of modern network devices, soft start verification is becoming increasingly important due to the increasing use of digital controllers. The RTM3000 oscilloscopes offer analysis functionality for tracking pulse width modulation (PWM), which is ideal for verifying and optimizing the soft start. The aim of the soft start is to limit the load on the power driver section and to prevent overshoots. So z. B. shorten the lifespan of a battery with a downstream switched-mode power supply converter (SNT) if the input current is not limited by the soft start.
With the RTM3000 oscilloscopes you receive detailed information about the control signal of the switching part in order to implement and verify the soft start algorithm. The software part can be easily developed and tested regardless of the design of the power amplifier.
A voltage probe on the switching element of the power supply unit is required for the soft start measurement. In the case of a simple buck converter, the gate of the switching element is the preferred choice.
Lieferumfang
- Scope of delivery with 1 probe per channel and power cord
Accessoires (19 products )
Alternate products (2 products )
Recommendations (13 products )
Options (1 product )
Offers (1 product )
News and Knowledge
Navigating through the range of available specifications, options and capabilities can be challenging. There are a lot o...