Rohde&Schwarz ZNLE18 | Network analyzer, vectorial, 2 port, 1 MHz - 18 GHz, connector: type N (f) (1323.0012.70)
Manufacturer number: 1323.0012.70
On Request
Rohde & Schwarz 1323.0012.70 | ZNLE18 network analyzer, vectorial, 2 port, 1 MHz - 18 GHz, connection: Type-N (f)
- Frequency range from 100 kHz to 18 GHz
- Two-port vector network analyzer with a full S-parameter test set for bidirectional measurements on passive components
- High dynamics up to 120 dB (typ.)
- Measurement bandwidths from 1 Hz to 500 kHz
- Fast measurements, i.e. 8.7 ms for 401 points (100 kHz IF bandwidth, 200 MHz span, correction off)
- Compact dimensions (24 cm depth) and low weight (6 kg)
- Standalone device with 10.1 "WXGA touchscreen
- Windows 10 operating system
- 3 year warranty
Description
ZNLE18 | Network analyzer, vectorial, 2 port, 1 MHz - 18 GHz, connector: type N (f) (1323.0012.70)
The user interface and the compact dimensions make the Rohde & Schwarz ZNLE the ideal companion for VNA basic applications.
The R&S ZNLE is a two-port vector network analyzer for bidirectional measurements of the S parameters S11, S21, S12 and S22 on passive components. When ordering the R&S ZNLE, only three decisions have to be made:
- Select frequency range
- Decide if a GPIB interface is needed
- Decide whether time domain analyzes or cable fault measurements should be carried out
You receive the Rohde & Schwarz ZNLE with a frequency range from 100 kHz to 3 GHz / 4.5 GHz / 6 GHz / 14 GHz / 18 GHz. A controller for remote control of the R&S ZNLE can be connected to the optional GPIB interface.
As a standalone device, the R&S ZNLE does not need an external PC to configure the test setup. The measurement can begin immediately after switching on.
The measurement can begin immediately after switching on. The time domain analysis (R&S ZNL-K2) and cable fault measurement (R & S®ZNL-K3) options extend the R&S ZNLE with important functions for general test purposes.