Rohde&Schwarz ZNLE3 | Network analyzer, vectorial, 2 port, 1 MHz - 3 GHz, connector: type N (f) (1323.0012.53)

Name: ZNLE3 | Network analyzer, vectorial, 2 port, 1 MHz - 3 GHz, connector: type N (f) (1323.0012.53)
Brand: Rohde&Schwarz
SKU: 1323.0012.53
Availability: OutOfStock

Manufacturer number: 1323.0012.53

Delivery time upon request

On Request

or choose one of the following options:

Product inquiries Request education-price

Rohde & Schwarz 1323.0012.53 | ZNLE3 network analyzer, vectorial, 2 port, 1 MHz - 3 GHz, connection: Type-N (f)

Frequency range from 100 kHz to 3 GHz
Two-port vector network analyzer with a full S-parameter test set for bidirectional measurements on passive components
High dynamics up to 120 dB (typ.)
Measurement bandwidths from 1 Hz to 500 kHz
Fast measurements, i.e. 8.7 ms for 401 points (100 kHz IF bandwidth, 200 MHz span, correction off)
Compact dimensions (24 cm depth) and low weight (6 kg)
Standalone device with 10.1 "WXGA touchscreen
Windows 10 operating system
3 year warranty

Independent Consulting

More than 50 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Description

ZNLE3 | Network analyzer, vectorial, 2 port, 1 MHz - 3 GHz, connector: type N (f) (1323.0012.53)

The user interface and the compact dimensions make the Rohde & Schwarz ZNLE the ideal companion for VNA basic applications.

The R&S ZNLE is a two-port vector network analyzer for bidirectional measurements of the S parameters S11, S21, S12 and S22 on passive components. When ordering the R&S ZNLE, only three decisions have to be made:

Select frequency range
Decide if a GPIB interface is needed
Decide whether time domain analyzes or cable fault measurements should be carried out

You receive the Rohde & Schwarz ZNLE with a frequency range from 100 kHz to 3 GHz / 4.5 GHz / 6 GHz / 14 GHz / 18 GHz. A controller for remote control of the R&S ZNLE can be connected to the optional GPIB interface.

As a standalone device, the R&S ZNLE does not need an external PC to configure the test setup. The measurement can begin immediately after switching on.

The measurement can begin immediately after switching on. The time domain analysis (R&S ZNL-K2) and cable fault measurement (R & S®ZNL-K3) options extend the R&S ZNLE with important functions for general test purposes.

Accessoires (19 products )

Rohde&Schwarz ZCAN

Calibration kit, 50 Ohm, Type-N, DC - 3 GHz, Open / Short, Load, Through (Type-N (f) (m)) (0800.8515.52)

Delivery time upon request

On Request

Rohde&Schwarz ZV-Z191

Cable, flexible, phase stable, 50 Ohm, DC - 18 GHz, Type-N (m) to Type-N (m), length: 61 cm (1306.4507.24)

Delivery time upon request

On Request

Rohde&Schwarz ZV-Z192

Cable, flexible, phase stable, 50 Ohm, DC - 18 GHz, Type-N (m) - 3.5 mm (m), length: 61 cm (1306.4513.24)

Delivery time upon request

On Request

Rohde&Schwarz FPL1-Z1

Transport protection cover, for FPL1000 and ZNL/ZNLE (1323.1960.02)

Delivery time upon request

€160.00

Rohde&Schwarz FPL1-Z2

Carrying case with transparent lid for FPL1000 and ZNL/ZNLE (1323.1977.02)

Delivery time upon request

€445.00

Rohde&Schwarz FPL1-Z3

Chest strap, for FPL1000 and ZNL, for portable operation with optional battery pack (1323.1683.02)

Delivery time upon request

€110.00

Rohde&Schwarz FPL1-Z6

Adapter, rack, 19 inch, for FPL1000 and ZNL/ZNLE (1323.1954.02)

Delivery time upon request

€220.00

Rohde&Schwarz ZV-Z191

Cable, flexible, phase stable, 50 Ohm, DC - 18 GHz, Type-N (m) to Type-N (m), length: 91 cm (1306.4507.36)

Delivery time upon request

On Request

Rohde&Schwarz ZV-Z192

Cable, flexible, phase stable, 50 Ohm, DC - 18 GHz, Type-N (m) - 3.5 mm (m), length: 91 cm (1306.4513.36)

Delivery time upon request

On Request

Rohde&Schwarz ZNLE-B100

Extension of the lower frequency limit to 100 kHz (1303.9272.02)

Delivery time upon request

On Request

Rohde&Schwarz ZNL-B19

Removable hard drive, for ZNL, pre-mounted on PC card, including analyzer firmware (1323.2938.02)

Delivery time upon request

On Request

Rohde&Schwarz FPL1-B10

Interface, GPIB, for FPL1000 / EPL1000 (1323.1890.02)

Delivery time upon request

€685.00

Rohde&Schwarz ZCAN

Calibration kit, 75 Ohm, Type-N, DC - 3 GHz, Open / Short, Load, Through (Type-N (f) (m)) (0800.8515.72)

Delivery time upon request

On Request

PMK 885-400-000

Sonic 4000 RF, probe, active, AC coupled, 10x, 200 Hz - 4 GHz, ± 8 V, 1.3 m

Delivery time upon request

€3,950.00

Rohde&Schwarz RVZ

Power divider 50 Ohm (0800.6612.52)

Delivery time upon request

On Request

Rohde&Schwarz ZN-ZE126

Calibration unit, 50 Ohm, 2 configurable ports, 5 kHz to 26.5 GHz (1350.8040.26)

Delivery time upon request

On Request

Rohde&Schwarz ZN-ZE109

Calibration unit, 50 Ohm, 2 configurable ports, 5 kHz to 9 GHz (1350.8040.09)

Delivery time upon request

On Request

Rohde&Schwarz ZN-ZE104

Calibration unit, 50 Ohm, 2 configurable ports, 5 kHz to 4.5 GHz (1350.8040.04)

Delivery time upon request

On Request

Rohde&Schwarz ZN-ZE118

Calibration unit, 50 Ohm, 2 configurable ports, 5 kHz to 18 GHz (1350.8040.18)

Delivery time upon request

On Request

Alternate products (7 products )

Rohde&Schwarz ZNLE6

Network analyzer, vectorial, 2 port, 1 MHz - 6 GHz, connector: type N (f) (1323.0012.56)

Delivery time upon request

On Request

Bundle

Bundle

Rohde&Schwarz ZNLE3-P1

Packet Network Analyzer, Vectorial, 2 Port, 1 MHz - 3 GHz (1323.0012P01)

Delivery time upon request

On Request

Bundle

Bundle

Rohde&Schwarz ZNLE6-P2

Packet Network Analyzer, Vectorial, 2 Port, 1 MHz - 6 GHz (1323.0012P02)

Delivery time upon request

On Request

Bundle

Bundle

Rohde&Schwarz ZNLE3-COM

Bundle ZNLE3 vector network analyzer, 2 port, up to 3 GHz including options (1323.0012P05)

Delivery time upon request

€13,060.00

Rohde&Schwarz ZNLE4

Network analyzer, vectorial, 2 port, 1 MHz - 4.5 GHz, connector: type N (f) (1323.0012.54)

Delivery time upon request

On Request

Rohde&Schwarz ZNLE14

Network analyzer, vectorial, 2 port, 1 MHz - 14 GHz, connector: type N (f) (1323.0012.64)

Delivery time upon request

On Request

Rohde&Schwarz ZNLE18

Network analyzer, vectorial, 2 port, 1 MHz - 18 GHz, connector: type N (f) (1323.0012.70)

Delivery time upon request

On Request

Recommendations (2 products )

Rohde&Schwarz VSE

Vector Signal Explorer Basic Software Enterprise Edition (1345.1105.06)

Delivery time upon request

On Request

Rohde&Schwarz VSE

Vector Signal Explorer Basic Software Basic Version (1345.1011.06)

Delivery time upon request

On Request

Options (1 product )

Rohde&Schwarz FPL1-B10

Interface, GPIB, for FPL1000 / EPL1000 (1323.1890.02)

Delivery time upon request

€685.00

Probes (1 product )

PMK 885-400-000

Sonic 4000 RF, probe, active, AC coupled, 10x, 200 Hz - 4 GHz, ± 8 V, 1.3 m

Delivery time upon request

€3,950.00

About the Manufacturer

Rohde&Schwarz

For more than 90 years, Rohde & Schwarz has been one of the most innovative and progressive companies in the fields of test and measurement, broadcasting and media technology, cyber security, secure communications, and radiomonitoring and radiolocation technology. In its traditional fields of activity, Rohde & Schwarz is one of the world's leading suppliers. As a manufacturer of mobile communications and EMC test and measurement equipment as well as broadcasting and measurement technology for digital terrestrial television, the Group is the world market leader.

Rohde&Schwarz ZNLE3 | Network analyzer, vectorial, 2 port, 1 MHz - 3 GHz, connector: type N (f) (1323.0012.53)

Rohde & Schwarz 1323.0012.53 | ZNLE3 network analyzer, vectorial, 2 port, 1 MHz - 3 GHz, connection: Type-N (f)

Documents & Downloads

Description

ZNLE3 | Network analyzer, vectorial, 2 port, 1 MHz - 3 GHz, connector: type N (f) (1323.0012.53)

Accessoires (19 products )

Alternate products (7 products )

Recommendations (2 products )

Options (1 product )

Probes (1 product )

About the Manufacturer

Last Seen Products