Pico PP978 | USB-PC differential pulse generator PG912 50 Ohm N (m), <40 ps ± pulse,> 200mV fixed amplitude
Manufacturer number: PP978
PICO PP978 | PG912 pulse generator with differential 50 Ω outputs, 40 ps pulse edges, N connector, fixed amplitude of> 200 mV, pulse output through positive and negative tunnel diode heads.
- 50 Ω output, N plug, with tunnel diodes for positive and negative output
- Pulse slope: <40 ps
- Output voltage: fixed, 200 mV
- Variable time offset of the outputs to each other in the range of ± 500 ps with time increments of 1 ps
- Differential outputs
- Pulse width: 200 ns to 4 µs
- Variable internal pulse repetition rate from 1 µs to 1 s
- RMS jitter: 3 ps (typical) relative to the external trigger
- Attached adapter N socket to SMA plug
- Interface: USB2.0, compatible with USB 1.1 and USB 3.0
- Dimensions: Width: 190 mm x depth: 180 mm x height: 40 mm
- Weight: 560 g
- TDR / TDT network reflection and transmission analysis
- Frequency response and spectral analysis
- Determination of time reference, jitter and crosstalk
- Semiconductor test
- Pulse and ultra broadband radar applications
- Test of laser diode drivers and controls
Documents & Downloads
Description
PP978 | USB-PC differential pulse generator PG912 50 Ohm N (m), <40 ps ± pulse,> 200mV fixed amplitude
The PP978 / PG912 pulse generator from PICO Technology offers pulses with slopes of <40 ps in 50 Ω. This allows modules, transmission paths and networks with high bandwidth to be controlled with this device. With the output signals, which are also available differentially at the output, high-speed or broadband transmissions can be carried out in many different applications such as B. in reflection measurements, semiconductor tests, Gbit connections, interface tests and in radar systems.
Differential high-speed data transmission measurements are becoming increasingly important in the fields of data communication in computing, transmission and telecommunications. Inexpensive pulse generators with steep flanks like the PicoSource® PG900 series are currently not available on the market. PICO Technology has closed this gap with the PG900 series pulse generator.
Lieferumfang
- Operating instructions, quick introduction
- Power supply 230 VAC to 5 V (power supply is designed for worldwide use)
- USB 2.0 cable, 1.8 m
- Open-end wrench for SMA / PC3.5 / 2.92 connections
- Transport case
- Positive tunnel diode head with slope <40 ps
- Negative tunnel diode head with slope <40 ps
- 2 pieces TA172, 12 GHz adapter N socket to SMA plug
- 2 pieces TA173, 20 dB attenuator (10 GHz) with connections SMA plug / socket
- 2 pieces of 50 Ω cable with SMA plug, length 60 cm