Keysight N9323C | Signal / Spectrum Analyzer (BSA), 9 kHz to 13.6 GHz

Manufacturer number: N9323C

Keysight N9323C | Basic spectrum analyzer (BSA / Basic Spectrum Analyzer) from 9 kHz to 13.6 GHz for μW applications.

  • Frequency range 1 MHz to 13.6 GHz
  • Aging rate ± 0.1ppm / year
  • Input dynamic range: -141 to +20 dBm
  • Amplitude accuracy: ± 0.3 dB
  • Reduced frequency drift 5 to 45 ° C: Option PFR with ± 5x10-8; Standard ± 1x10-6
  • Noise level: up to -156 dBm / Hz DANL with option P07 preamplifier
  • Resolution bandwidth 10 Hz to 3 MHz, adjustable in 1-3-10 steps
  • For power measurements, significantly better amplitude accuracy of ± 0.3 dB
  • Built-in step attenuator up to 50 dB in 1 dB steps
  • Insertion loss measurements
  • With just one click you can measure and display:
    CHP: channel power of a carrier (channel power)
    OBW: Occupied Bandwidth
    ACPR: Adjacent Channel Power Ratio (ratio of the power sent in the adjacent channel to the channel power)
    SEM: Spectrum Emission Mask and the spectrogram
  • The SCPI programming commands are compatible with the commands of the ESA series of spectrum analyzers
  • Guarantee: 5 years

Areas of application:

  • General applications in development and production for IoT, consumer electronics, RF and uW component characterization, broadcast and satellite signal monitoring, etc.
  • Due to its simple operation, the Seire N932xC is ideally suited for the production environment
  • Basic measurements on high-frequency circuits and modules
  • Use in the service environment
  • Student training for HF

Options:

  • P13: Optional preamplifier from 1 MHz to 13.6 GHz, 15 dB gain
  • TG7: Optional tracking generator from 5 MHz to 7 GHz; Resolution 1 Hz, output power: -20 to + 0 dBm for transmission measurements
  • AM / FM modulation analysis (option AMA)
  • ASK / FSK modulation analysis (DMA option)
  • Channel scanning (option SCN) for power measurement: up to 20 channels
  • Monitoring the spectrum by means of a spectrogram (option MNT)
  • Security feature: the flash memory is written with a loud "1", USB and LAN can be switched off (option SEC)
  • Task manager (option TPN): For easier test automation, measurement tasks and settings can be set up via the task manager, which can then be called up repeatedly during the measurement process; You can jump back and forth between these measurements / settings
  • Connection of power sensors for RMS measurements (U2000 series) to a USB port (PWM option)
  • Connection of power sensors for peak power measurements (U2020 X series) (option PWP)
  • Time gated sweep (TMG option): Gate delay range 12 µs to 10 s, gate length 84 µs to 10 s
  • EMC filters and detectors (EMC option): CISPR filter bandwidths 200 Hz, 9 kHz, 120 kHz and 1 MHz with quasi-peak detector

GPIB interface (option G01)

Independent Consulting

More than 50 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Technical Data

Description

N9323C | Signal / Spectrum Analyzer (BSA), 9 kHz to 13.6 GHz

The basic spectrum analyzer is designed for general use in the laboratory or in production. It offers a frequency range from 9 KHz to 13.6 GHz.

During the construction, special emphasis was placed on intuitive and simple operation. This means that the device can be set up by the operating personnel much more quickly and the measurement result is available more quickly. This is supported by the fact that 7 softkeys can be programmed by the user in order to be able to call up repetitive measurements more quickly. For easier test automation, the task manager can be used to set up measurement tasks and settings, which can then be called up repeatedly during the measurement process.

The Keysight Basic Spectrum Analyzers are available in four versions . In addition to the variant presented here, the BSA is also available with a bandwidth of up to 4 GHz (N9321C) , up to 7 GHz (N9322C) and up to 20 GHz bandwidth (N9324C) .

Accessoires (2 products )

Keysight N9323C-SEC
Security features for Keysight BSA N9323C
Delivery time upon request
On Request
Keysight N9323C-EMC
EMI filters and quasi-peak detector for Keysight BSA N9323C
Delivery time upon request
On Request

Alternate products (3 products )

Keysight N9321C
Signal / Spectrum Analyzer (BSA), 9 kHz to 4 GHz
Delivery time upon request
On Request
Keysight N9322C
Signal / Spectrum Analyzer (BSA), 9 kHz to 7 GHz
Delivery time upon request
€14,180.00
Keysight N9324C
Signal / Spectrum Analyzer (BSA), 9 kHz to 20 GHz
Delivery time upon request
On Request

Recommendations (2 products )

Keysight N9323C-EMC
EMI filters and quasi-peak detector for Keysight BSA N9323C
Delivery time upon request
On Request
Keysight N9323C-SEC
Security features for Keysight BSA N9323C
Delivery time upon request
On Request

About the Manufacturer

Keysight
dataTec and Keysight Technologies have had a strong partnership since 1999. No other company offers such a wide range of measurement technology, testing solutions, and solutions for our connected world. With Keysight's measuring instruments, you are also well-equipped for today's and tomorrow's tasks.

Last Seen Products

Product added to compare
Product Compare added Product Compare