Keysight N9322C | Signal / Spectrum Analyzer (BSA), 9 kHz to 7 GHz
Manufacturer number: N9322C
Keysight N9322C | Basic spectrum analyzer from 9 kHz to 7 GHz and -162 dBm / Hz DANL for general applications.
- Frequency range 9 kHz to 7 GHz
- Aging rate ± 0.1ppm / year
- Input dynamic range: -152 to +20 dBm
- Amplitude accuracy: ± 0.3 dB
- Reduced frequency drift 5 to 45 ° C: PFR option with ± 5x10-8; Standard ± 1x10-6
- Noise level: up to -162 dBm / Hz DANL with option P07 preamplifier
- Resolution bandwidth 10 Hz to 3 MHz, adjustable in 1-3-10 steps
- Significantly better amplitude accuracy of ± 0.3 dB for power measurements
- Built-in step attenuator up to 50 dB in 1 dB steps
- Reflection measurements
- VSWR measurements
- Insertion loss measurements
- Distance-to-fault (DTF)
- With just one click you can measure and display:
CHP: Channel power of a carrier (channel power)
OBW: Occupied Bandwidth
ACPR: Adjacent Channel Power Ratio (ratio of the power transmitted in the adjacent channel to the channel power)
SEM: Spectrum Emission Mask (mask of the emitted spectrum) and the spectrogram - The SCPI programming commands are compatible with the commands of the ESA series on spectrum analyzers
- Warranty: 3 years
Areas of application:
- General applications in development and in the production test field
- Predestined for areas with trained personnel, because it is very easy to use
- Basic measurements on high-frequency circuits and modules
- In service
- education
- Video and audio applications
Options:
- TG7: optional tracking generator, from 5 MHz to 7 GHz; Resolution 1 Hz, output power: -20 to + 0 dBm with VSWR bridge for transmission and reflection measurements
- RM7 (option TG7 is required) Reflection measurements: frequency range 5MHz to 7 GHz, frequency resolution 100 kHz, output power -4 to +2 dBm
- AM / FM modulation analysis (AMA option)
- ASK / FSK modulation analysis (option DMA)
- Channel scanning (option SCN) for power measurement: up to 20 channels
- Spectrum monitoring of the spectrum (MNT option)
- Security feature: the flash memory is written with a loud "1", USB and LAN can be switched off (option SEC)
- Task manager (option TPN): To simplify test automation, measuring tasks and settings can be set up via the task manager, which can then be called up repeatedly in the measuring process; You can jump back and forth between these measurements / settings
- Connection of power sensors for RMS measurements (U2000 series) to a USB port (option PWM)
- Connection of power sensors for peak power measurements (U2020 X series) (option PWP)
- Baseband input (option BB1); Frequency range 9 kHz to 10 MHz, resolution 1 Hz
Technical Data
Amplitude range: | -152 dBm to 4 dBm |
---|---|
Analysis bandwidth (MHz): | 1 |
Article number: | N9322C |
DANL Displayed Average Noise: | ca. -152 dBm |
Demodulations: | AM, FM |
Detectors: | Normal, positive peak, sample, negative peak, average (video, RMS, voltage), quasi Peak EMI Option |
Dimensions (L x W x H) (mm): | 400 x 320 x 132,5 |
Dynamics: | 156 dB |
Filter bandwidths: | 200 Hz, 9 kHz, 120 kHz, 1 MHz EMI optional |
Frequency stability: | 1ppm |
Interfaces: | USB-TMC, USB-CDC (Virtual COM), LAN optional: GPIB |
Measurement functions: | AM/FM demodulation, spectrogram, modulation analysis, channel power, OCBW, TOI intermodulation, ASK/FSK demodulation |
Model: | N9322C |
Resolution bandwidth: | 1Hz |
SSB phase noise: | -90 dBc/Hz @ 1 GHz (10 kHz carrier offset) |
Screen size: | 16,5 cm |
Screen type: | 640 x 480 |
Special features: | Tracking generator optional |
Sweep: | linear |
Tracking-Generator: | optional |
Warranty (years): | 5 |
Weight (kg): | 7.9 |
max. Frequency range (GHz): | 7 |
min. Frequency range (kHz): | 9 |
Description
N9322C | Signal / Spectrum Analyzer (BSA), 9 kHz to 7 GHz
The basic spectrum analyzer is designed for general use in the laboratory or in production. It offers a frequency range from 9 KHz to 7 GHz with a noise level of max. - 162 dBm / Hz DANL (Displayed Average Noise Level) (with preamplifier switched on) with a resolution bandwidth of 10 Hz to 3 MHz and an aging rate of 0.1 ppm per year.
During construction, special emphasis was placed on intuitive and simple operation. As a result, the device can be set up much faster by the operating personnel and the measurement result is available faster. This is supported by the fact that 7 softkeys can be programmed by the user so that repetitive measurements can be called up more quickly. To simplify test automation, measurement tasks and settings can be set up via the Task Manager, which can then be called up repeatedly in the measurement process.
A built-in tracking generator with a built-in VSWR bridge (voltage standing wave ratio), the additional possible reflection measurements, e.g. B. reflection attenuation, offer you more insight into your circuit or modules.
Lieferumfang
- Device N9322C
- Quick start guide
- Adapter plug N to BNC
- USB cable
- BNC cable
- Power cord
- Documentation CD