Keysight N9321C | Signal / Spectrum Analyzer (BSA), 9 kHz to 4 GHz

Name: N9321C | Signal / Spectrum Analyzer (BSA), 9 kHz to 4 GHz
Brand: Keysight
SKU: N9321C
Availability: OutOfStock

Manufacturer number: N9321C

Delivery time upon request

On Request

or choose one of the following options:

Product inquiries

Keysight N9321C | Basic spectrum analyzer (BSA / Basic Spectrum Analyzer) from 9 kHz to 4 GHz and -162 dBm / Hz DANL for general HF applications.

Frequency range 9 kHz to 4 GHz
Aging rate ± 0.1ppm / year
Input dynamic range: -152 to +20 dBm
Amplitude accuracy: ± 0.3 dB
Reduced frequency drift 5 to 45 ° C: Option PFR with ± 5x10-8; Standard ± 1x10-6
Noise level: up to -162 dBm / Hz DANL with option P04 preamplifier
Resolution bandwidth 10 Hz to 3 MHz, adjustable in 1-3-10 steps
For power measurements, significantly better amplitude accuracy of ± 0.3 dB
Built-in step attenuator up to 50 dB in 1 dB steps
Reflection measurements
VSWR measurements
Insertion loss measurements
Distance-to-fault (DTF / fault distance measurement)
With just one click you can measure and display:
CHP: channel power of a carrier (channel power)
OBW: Occupied Bandwidth
ACPR: Adjacent Channel Power Ratio (ratio of the power sent in the adjacent channel to the channel power)
SEM: Spectrum Emission Mask and the spectrogram
The SCPI programming commands are compatible with the commands of the ESA series of spectrum analyzers
Guarantee: 5 years

Areas of application:

General applications in development and production for IoT, consumer electronics, RF and uW component characterization, broadcast and satellite signal monitoring, etc.
Due to its simple operation, the Seire N932xC is ideally suited for the production environment
Basic measurements on high-frequency circuits and modules
Use in the service environment
Student training for HF

Options:

P04: Optional preamplifier from 9 kHz to 4 GHz, 15 dB gain 9 kHz to 100 kHz, 25 dB gain 100 kHz to 4 GHz
TG4: Optional tracking generator from 5 MHz to 4 GHz; Resolution 1 Hz, output power: -20 to + 0 dBm with VSWR bridge for transmission and reflection measurements
RM4 (option TG4 is required) Reflection measurements: frequency range 5 MHz to 4 GHz, frequency resolution 100 kHz, output power -4 to +2 dBm
AM / FM modulation analysis (option AMA)
ASK / FSK modulation analysis (DMA option)
Channel scanning (option SCN) for power measurement: up to 20 channels
Monitoring the spectrum by means of a spectrogram (option MNT)
Security feature: the flash memory is written with a loud "1", USB and LAN can be switched off (option SEC)
Task manager (option TPN): For easier test automation, measurement tasks and settings can be set up via the task manager, which can then be called up repeatedly during the measurement process; You can jump back and forth between these measurements / settings
Connection of power sensors for RMS measurements (U2000 series) to a USB port (PWM option)
Connection of power sensors for peak power measurements (U2020 X series) (option PWP)
Baseband input (option BB1); Frequency range 9 kHz to 10 MHz, resolution 1 Hz
Time gated sweep (TMG option): Gate delay range 12 µs to 10 s, gate length 84 µs to 10 s
EMC filters and detectors (EMC option): CISPR filter bandwidths 200 Hz, 9 kHz, 120 kHz and 1 MHz with quasi-peak detector

GPIB interface (option G01)

Independent Consulting

More than 50 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Technical Data

Amplitude range:	-152 dBm to 4 dBm
Analysis bandwidth (MHz):	1
Article number:	N9321C
DANL Displayed Average Noise:	ca. -152 dBm
Demodulations:	AM, FM
Detectors:	Normal, positive peak, sample, negative peak, average (video, RMS, voltage), quasi Peak EMI Option
Dimensions (L x W x H) (mm):	400 x 320 x 132,5
Dynamics:	156 dB
Filter bandwidths:	200 Hz, 9 kHz, 120 kHz, 1 MHz EMI optional
Frequency stability:	1ppm
Interfaces:	USB-TMC, USB-CDC (Virtual COM), LAN optional: GPIB
Measurement functions:	AM/FM demodulation, spectrogram, modulation analysis, channel power, OCBW, TOI intermodulation, ASK/FSK demodulation
Model:	N9321C
Resolution bandwidth:	1Hz
SSB phase noise:	-90 dBc/Hz @ 1 GHz (10 kHz carrier offset)
Screen size:	16,5 cm
Screen type:	640 x 480
Special features:	Tracking generator optional
Sweep:	linear
Tracking-Generator:	optional
Warranty (years):	5
Weight (kg):	7.9
max. Frequency range (GHz):	4
min. Frequency range (kHz):	9

Description

N9321C | Signal / Spectrum Analyzer (BSA), 9 kHz to 4 GHz

The basic spectrum analyzer is designed for general use in the laboratory or in production. It offers a frequency range of 9 KHz to 4 GHz with a noise level of max. - 162 dBm / Hz DANL (Displayed Average Noise Level) (with activated preamplifier) with a resolution bandwidth of 10 Hz to 3 MHz and an aging rate of 0.1 ppm per year.

During the construction, special emphasis was placed on intuitive and simple operation. This means that the device can be set up by the operating personnel much more quickly and the measurement result is available more quickly. This is supported by the fact that 7 softkeys can be programmed by the user in order to be able to call up repetitive measurements more quickly. For easier test automation, the task manager can be used to set up measurement tasks and settings, which can then be called up repeatedly during the measurement process.

An optionally built-in tracking generator with a built-in VSWR bridge (voltage standing wave ratio), the additional possible reflection measurements, e.g. B. Return loss, offer you more insight into your circuit or modules.

The Keysight Basic Spectrum Analyzers are available in four versions . In addition to the variant presented here, the BSA is also available with a bandwidth of up to 7 GHz (N9322C) , up to 13.6 GHz (N9323C) and up to 20 GHz bandwidth (N9324C) .

Accessoires (3 products )

Keysight N9321C-EMC

EMI filters and quasi-peak detector for Keysight BSA N9321C

Delivery time upon request

On Request

Keysight N9321C-G01

GPIB interface for Keysight BSA N9321C

Delivery time upon request

On Request

Keysight N9321C-SEC

Security features for Keysight BSA N9321C

Delivery time upon request

On Request

Alternate products (3 products )

Keysight N9322C

Signal / Spectrum Analyzer (BSA), 9 kHz to 7 GHz

Delivery time upon request

€14,180.00

Keysight N9323C

Signal / Spectrum Analyzer (BSA), 9 kHz to 13.6 GHz

Delivery time upon request

On Request

Keysight N9324C

Signal / Spectrum Analyzer (BSA), 9 kHz to 20 GHz

Delivery time upon request

On Request

Recommendations (3 products )

Keysight N9321C-EMC

EMI filters and quasi-peak detector for Keysight BSA N9321C

Delivery time upon request

On Request

Keysight N9321C-G01

GPIB interface for Keysight BSA N9321C

Delivery time upon request

On Request

Keysight N9321C-SEC

Security features for Keysight BSA N9321C

Delivery time upon request

On Request

About the Manufacturer

Keysight

dataTec and Keysight Technologies have had a strong partnership since 1999. No other company offers such a wide range of measurement technology, testing solutions, and solutions for our connected world. With Keysight's measuring instruments, you are also well-equipped for today's and tomorrow's tasks.

Keysight N9321C | Signal / Spectrum Analyzer (BSA), 9 kHz to 4 GHz

Keysight N9321C | Basic spectrum analyzer (BSA / Basic Spectrum Analyzer) from 9 kHz to 4 GHz and -162 dBm / Hz DANL for general HF applications.

Technical Data

Documents & Downloads

Description

N9321C | Signal / Spectrum Analyzer (BSA), 9 kHz to 4 GHz

Accessoires (3 products )

Alternate products (3 products )

Recommendations (3 products )

About the Manufacturer

Last Seen Products