Keysight U2022XA | USB broadband power sensor, 50 MHz to 40 GHz, X series
Manufacturer number: U2022XA
On Request
Keysight U2022XA | Power sensor 50 MHz to 40 GHz. Measure peak and average power directly on the PC.
- Frequency range from 50 MHz to 40 GHz
- Wide dynamic range from -30 to +20 dBm (peak / limited); -35 to +20 dBm (average)
- 30 MHz video bandwidth
- Single measurement in real time mode with 80 MSa / s
- Internal calibration and resetting to "zero" by means of a built-in reference DC voltage source and switching element, so that calibration is possible even though the sensor is supplied with a signal to be measured. A connection to your DUT is therefore unnecessary for calibration
- High measuring speed of> 3500 measurements / second (free running / fast buffer mode)
- Available measurement processes for: DME, GSM, EDGE, CDMA, WCDMA, WLAN, WiMAX and LTE
- Connection directly to the PC via USB; no other power meter or power supply is needed
- Warranty: 3 years
Areas of application:
- development
- production
- General radio frequency technology
- Cellular technology
- Aviation and defense technology
- Radar technology
Another power sensor:
- U2021XA with bandwidth 50 MHz to 18 GHz with similar properties
Documents & Downloads
Description
U2022XA | USB broadband power sensor, 50 MHz to 40 GHz, X series
The U2022XA power sensor from Keysight (formerly Agilent's electronic measurement technology), with which both the peak power and the average power of signals in the frequency range from 50 MHz to 40 GHz can be measured, is characterized by the fact that it is directly connected to your PC via the USB interface can be connected. A software BenchVue (30 days trial version) is supplied free of charge with the power sensor, which you install on your PC and you already have a complete measuring unit to measure the power level of the high-frequency signals.
For triggering on very narrow and small signals that hardly stand out from the noise level, the power sensors also have trigger inputs and trigger outputs, so that exactly these signals can be triggered. This is made possible by a connection with a BNC or SMB connector from the signal source or the DUT (device under test) directly to the trigger input of the power sensor.
Note:
When you purchase this new device, you will now receive a "Node-Locked" license for the Keysight measurement and analysis app BenchVue for power meters BV0007B free of charge . This is limited to the specific device. The license is not limited in time.
On the Keysight website you will find further information on downloading, registering and activating your BenchVue license: To the Keysight website.