Keysight N9960A | FieldFox handheld µW spectrum analyzer 9 kHz to 32 GHz, USB 2.0, LAN, rechargeable battery
Manufacturer number: N9960A
On Request
Keysight N9960A | FieldFox, spectrum analyzer 9 kHz to 32 GHz.
- Frequency range: 300kHz to 32GHz
- Directivity >42dB
- Dynamic range 104 dB
- DANL: -153 dBm (specified), typical -158 dBm at 2.8 to 4.5 GHz
- Typical output power (6.5 to 18 GHz): 4 dBm (frequency dependent)
- Flat output power frequency response (± 0.5 dB) at an output power of -15 dBm in the frequency range 300 kHz to 32 GHz
- Return Loss and VSWR (Voltage Standing Wave Ratio) measurements
- Output power adjustable in 1 dB steps
- Built-in power meter: 5 kHz to 32 GHz
- Optional power measurement by Keysight USB RF power sensor. Frequency range depends on the type of power meter used)
- Battery life 3.5 hours
- Closed housing, dustproof, without fans etc.
- Water repellent; resists salty and humid influences
- Meets the requirements of: IEC/EN 60529, MIL-PRF-28800F Class 2 and MIL-STD-810G, Method 511.5, Procedure I (conditions for use in potentially explosive atmospheres)
- Dimensions: Width: 188mm, Height: 292mm, Depth: 72mm
- Weight: 3.2kg
Typical areas of application:
- satellite communications
- mobile communication
- radar technology
- Aerospace and defense technology
- Active and passive component and module test
Options:
For cable and antenna test:
- Return Loss and VSWR (Voltage Standing Wave Ratio) measurements
For use as a spectrum analyzer:
- Extended range for transmission analysis (ERTA / Extended Range Transmission Analysis)
- Tracking generator over the complete device frequency range
- preamp
- Interference analyzer and spectrogram
- Timegating option for spectrum measurements
For RF power measurements:
- Frequency dependent USB RF power measurements
- USB interface for connecting USB RF power sensors
- Integrated power meter to measure over a user-definable frequency range
- Pulse measurements (radar) with a peak RF power meter
For general system properties:
- GPS receiver
- Variable DC voltage source 1 V to 32 V, 650 mA max and 8 W max
- remote control
Note: This list does not claim to be complete. Before ordering, please consult our office staff
Technical Data
Amplitude range: | -140 dBm to 27 dBm |
---|---|
Analysis bandwidth (MHz): | 10 |
Article number: | N9960A |
DANL Displayed Average Noise: | ca. -145 dBm |
Demodulations: | Optional: AM, FM |
Detectors: | RMS average, Normal, positive peak, negative peak, sample |
Dimensions (L x W x H) (mm): | 72 x 188 x 292 |
Dynamics: | 172 dB |
Filter bandwidths: | 1 Hz to 500 kHz |
Frequency stability: | 0.7ppm |
Interfaces: | USB, LAN |
Measurement functions: | Six markers absolute or relative noise markers Limit test optional: 209 Extended range transmission analysis (ERTA) 220 Full-band tracking generator 235 Pre-amplifier 236 Interference analyzer and spectrogram 238 Spectrum analyzer time gating 312 Channel |
Model: | N9960A |
Resolution bandwidth: | 1Hz |
SSB phase noise: | < -106 dBc/Hz @ 1 GHz (30 kHz carrier offset) |
Screen size: | 16,5 cm |
Screen type: | LCD, LED Hintergrundbeleuchtung |
Special features: | large buttons many measurement applications optional reflection-free display Real time spectrum with 10 MHz bandwidth |
Sweep: | linear |
Tracking-Generator: | optional |
Warranty (years): | 3 |
Weight (kg): | 3.2 |
max. Frequency range (GHz): | 32 |
min. Frequency range (kHz): | 9 |
Description
N9960A | FieldFox handheld µW spectrum analyzer 9 kHz to 32 GHz, USB 2.0, LAN, rechargeable battery
The Keysight N9960A Fast Spectrum Analyzer is a mobile, handheld device that includes two types of devices: a spectrum analyzer and an RF power meter. This device is intended for rough field use in its basic configuration for spectrum measurements and HF pulse measurements (radar). The integrated HF power measurement option offers measurement of the HF signal power at the push of a button over a bandwidth that can be defined by the user. With an optional extension, USB power sensors can also be connected directly. By using USB peak power sensors, the pulse peak power and the average power can be measured on radar systems in order to have the ratio of peak power to average power displayed directly.
With this device you have Keysight quality and accuracy in your hands - because it is portable, fits well and is easy to use.
The device can be adapted to the respective application using further optional and retrofittable configuration options (see list at the end of this description).
It should be emphasized that this device can be equipped with a tracking generator covering the entire frequency range of the device.