Keysight N9926A | FieldFox handheld µW network analyzer 30 kHz to 14 GHz, USB 2.0, LAN, rechargeable battery
Manufacturer number: N9926A
On Request
Keysight N9926A | FieldFox, handheld vector network analyzer 30 kHz to 14 GHz.
Vector network analyzer:
- 30kHz to 14GHz
- Directivity >42 dB, dynamic range 100dB
- Output power level -4 dBm (9 GHz to 14 GHz), -2 dBm (6.5 GHz to 9 GHz)
- Flat frequency response of the output power (± 1 dB) over the entire frequency range, output power adjustable in 1 db steps
- Transmission and reflection measurements (S21, S11) or with optional 2-port measurement (S21, S11, S12, S22)
Cable and Antenna Analyzer (CAT) and Vector Network Analyzer (VNA):
- 30kHz to 14GHz
- Cable attenuation, reflection loss, distance to fault
Vector Volt Meter:
- 30 kHz to 14 GHz, comparing phase and electrical cable length
- Power measurement by a USB power sensor: 9 kHz to 24 GHz (depending on the type of sensor used)
- Built-in power meter: 5 kHz to 14 GHz
General properties:
- Quick-Cal: built-in calibration routines - no calibration components are required
- CalReady: integrated test connection for S-parameter determination and for error distance measurement in cable measurements
- Optional GPS receiver
- Optional: Variable DC voltage source 1 V to 32 V, 650 mA max and 8 W max
- Battery life 3.5 hours
- Weight: 3.0kg
- Operating temperature range: -10°C to 55°C
Typical areas of application:
- satellite communications
- mobile communication
- Measurement of the connection in a communication system (e.g. GSM) to the operative backbone system
- radar technology
- Aerospace and defense technology
- Active and passive component and module test
Designed for rough use:
- Closed housing, dustproof, without fans etc.
- Water repellent; resists salty and humid influences
- Meets MIL-PRF-28800F Class 2
- Meets MIL-STD-810G, Method 511.5 Procedure I requirements for use in potentially explosive atmospheres (type test)
Description
N9926A | FieldFox handheld µW network analyzer 30 kHz to 14 GHz, USB 2.0, LAN, rechargeable battery
The fast field fox N9926A from Keysight is a mobile handheld device for rough field use for transmission and reflection measurements , S11, S21. With this instrument, you have Keysight (formerly Agilent's electronic metrology) quality and accuracy in your hands - because it's portable, feels good in your hand and is easy to use.
With optional configuration options, the system can be expanded into a 2-port S-parameter test system or it can optionally be configured so that antenna and cable tests are possible. Furthermore z. B. the optional installation of an integrated power meter, a vector voltmeter, a GPS receiver and a variably adjustable DC voltage source possible.