Keysight N9917A | FieldFox handheld µW combi analyzer 30 kHz to 18 GHz, USB 2.0, LAN, rechargeable battery
Manufacturer number: N9917A
On Request
Keysight N9917A | FieldFox High Frequency Combi Analyzer 30 kHz to 18 GHz.
Cable and Antenna Analyzer (CAT) and Vector Network Analyzer (VNA):
- 30kHz to 18GHz
- Dynamic range: 100 dB at 9 GHz; 94dB at 18GHz
- Output power level: -6 dBm (14 GHz to 18 GHz), -4 dBm (9 GHz to 14 GHz)
- CAT: Cable attenuation, return loss, distance to fault
- VNA: Measurement of the S parameters: S11, S21, S22, S12 according to amount and phase
Spectrum analyzer:
- 5kHz to 18GHz
- ± 0.5 dB amplitude accuracy over the entire bandwidth and over the entire temperature range from -10 °C to +55 °C. Same accuracy class as laboratory devices
- Signal-to-noise ratio ≥ 105 dB
- The accuracy is achieved without warm-up time and temperature fluctuations do not affect the stated accuracy
- Tracking generator over the entire bandwidth
Independent source, vector voltmeter (VVM), power meter and other built-in measurement capabilities:
- RF Source: 30 kHz to 18 GHz, CW, CW coupled and tracking
- VVM: 30 kHz to 18 GHz, comparing phase and electrical cable length
- Power measurement by a USB power sensor: 9 kHz to 24 GHz (depending on the type of sensor used)
- Integrated power meter 5 kHz to 18 GHz
- Optional GPS receiver
- Optional: Variable DC voltage source 1 V to 32 V, 650 mA max and 8 W max
General properties:
- Quick-Cal: built-in calibration routines - no calibration components are required
- CalReady: integrated test connection for S-parameter determination and for error distance measurement in cable measurements
- InstAlign: The accuracy is also achieved without warm-up time over the entire frequency range and temperature fluctuations have no influence on the specified accuracy
- optional integrated GPS receiver for assigning the measured values to geographic coordinates
- Battery life 3.5 hours
- Weight: 3.0kg
- Operating temperature range: -10°C to 55°C
Typical areas of application:
- satellite communications
- mobile communication
- Measurement of the connection in a communication system (e.g. GSM) to the operative backbone system
- radar technology
- Aerospace and defense technology
- In mobile communication within a cell for cable and antenna testing
- RF spectrum monitors and interference analysis
- Active and passive component and module test
Designed for rough use:
- Closed housing, dustproof, without fans etc.
- Water repellent; resists salty and humid influences
- Meets MIL-PRF-28800F Class 2
- Meets MIL-STD-810G, Method 511.5 Procedure I requirements for use in potentially explosive atmospheres (type test)
Description
N9917A | FieldFox handheld µW combi analyzer 30 kHz to 18 GHz, USB 2.0, LAN, rechargeable battery
The fast field fox N9917A from Keysight is a mobile handheld device for rough field use for testing cables and antennas . Optionally, it can be upgraded to a spectrum or network analyzer - hence the name "Combination Analyzer". With this device you have Keysight (formerly Agilent's electronic measurement technology) quality and accuracy in your hands - because it is portable, feels good in your hand and is easy to use.
Other optional expansion options are e.g. B. the installation of an integrated power meter, an independent signal generator, a vector voltmeter, an interference analyzer, a variably adjustable DC voltage source, and a GPS receiver.