Keysight N8482B | Power Sensor - Thermocouple, average, 100 KHz to 6 GHz
Manufacturer number: N8482B
On Request
Keysight N8482B | HF power meter with thermocouple, 100 KHz to 6 GHz.
- Frequency range: 100 kHz to 6 GHz
- Dynamic power measurement range: 0 dBm (1 mW) to +44 dBm (25.1 W)
- High accuracy of 1% and low noise <114 μW (maximum value)
- Linearity: from +29 to <+39 dBm: ± 0.52% and from +39 to +44 dBm: ± 1.66%
- Very good standing wave ratio (SWR / Standing Wave Ratio): 1.08 to 1.16 depending on the frequency range
- Wide dynamic range covered by a measuring head
- RF connector: Type N
- Automatic readout of the calibration data and corresponding correction factors from the EEPROM. The traceability of the performance measurement to the NIST standard (US National Institute of Standard and Technology) is given.
- Compatibility of this measuring head with the family power meters:
P series (N1911A / 12A),
EPM-P series (E4416A / 17A) and
EPM series (N1913A / 14A, E4418B / 19B) - Weight: 0.684 kg
- Dimensions: 83 mm (W) x 114 mm (H) x 283 mm (L)
- Warranty 1 year
Options:
- N8482B - Option CFT offers full SCPI code compatibility of the N8455A power sensor with those of the 8480A series. With this option, the calibration values and correction factors are attached to the outside of a label; no EEPROM
Note: All power sensors of the N8480 series are not compatible with the measuring devices 43x, E1416A, N8262A, with the microwave counters 5314x and with the base station test set E7495x
Documents & Downloads
Description
N8482B | Power Sensor - Thermocouple, average, 100 KHz to 6 GHz
The N848xA series of HF power meters is based on thermocouples and is one of the most accurate and fail-safe measuring heads that Keysight (formerly Agilents electronic measuring technology) has to offer. What makes them special is that the calibration factors are stored in an EEPROM. This eliminates the need to enter these calibration values into the power meter used before a measurement. The measuring device can read these values directly from the EEPROM. Furthermore, these measuring heads offer an extended frequency range and further power measuring ranges.