Keysight N2894A | Probe, passive 10X, 700MHz, 1.3m, BNC readout
Manufacturer number: N2894A
Keysight N2894A | Passive probe with 700 MHz bandwidth, 10: 1 divider and BNC / Readout connector.
- Bandwidth: 700 MHz
- Input resistance: 10 MΩ (when the probe is connected to an oscilloscope input with 1MΩ)
- Input capacity: ~ 11 pF
- Rise time 700 psec (10% -90%)
- Attenuation ratio 10: 1
- Oscilloscope input capacitance compensation range: 5 - 30 pF
- Maximum input voltage 300 Vrms (or> 400Vss) CAT I and CAT II
- Length of the connection cable 1.3 m
- BNC connector with readout
- Connection for identification of the probe
Compatible oscilloscopes:
- The probe is compatible with the Keysight (formerly Agilent's electronic measurement technology) oscilloscope series: 1000, 2000X, 3000X, 4000X, 3000, 5000, 6000, 7000, 8000, 9000
Technical Data
Documents & Downloads
Description
N2894A | Probe, passive 10X, 700MHz, 1.3m, BNC readout
What is special about the passive probe N2894A with a selectable divider factor 10: 1 and a bandwidth of 700 MHz is the very high input resistance of 10 MΩ. It is well equipped for a very wide range of applications, especially where a very low signal load is a criterion for the test point to be measured. In addition to high-frequency compensation, the probe offers an additional adjustment option for low frequencies, so that the output impedance of the probe can be matched to the input impedance of the oscilloscope for precise measurements.
This probe is compatible with the Keysight (formerly Agilent's electronic measurement technology) InfiniiVision and Infiniium series oscilloscopes with an input resistance of 1 MΩ.