Keysight N2875A | Probe, passive 20X, 500MHz, BNC Read Out
Manufacturer number: N2875A
Keysight N2875A | Passive probe, 20: 1, 500 MHz, readout.
- 350 MHz bandwidth
- Input capacitance 9.5 pF
- Input resistance 10 MΩ if the probe is connected to an oscilloscope input with 1 MΩ
- Attenuator ratio 20: 1
- maximum input voltage: 400 V CAT I and 300 V CAT II
- Oscilloscope input capacitance compensation range: 7 to 25 pF
- Cable length 1.3 m
- BNC connection with readout
- ideal in combination with Keysights (formerly Agilent) InfiniiVision- and Infiniium-
Technical Data
Documents & Downloads
Description
N2875A | Probe, passive 20X, 500MHz, BNC Read Out
The passive Keysight (formerly Agilent's electronic measurement technology) probe N2875A offers a bandwidth from 0 to 500 MHz and an attenuator of 20: 1 and is intended for general use. The small diameter of the probe tip of 2.5 mm, the small input capacity and the large number of accessories, especially for small pin spacings, make it ideal for measurements on ICs or surface-mount components (SMD). The sharp tip is designed with a spring, so that it is held in the middle of an IC connector by a special insulated bracket, preventing a short circuit to neighboring IC pins. Special adapters for good ground contact are also available.
This probe is suitable for all Keysight InfiniiVision and Infiniium oscilloscopes (formerly Agilent's electronic measurement technology) with an input resistance of 1 MΩ.