Keysight N2872A | Probe, Passive 10X, 350MHz, BNC Read Out
Manufacturer number: N2872A
On Request
Keysight N2872A | Passive probe, 10: 1, 350 MHz, readout.
- 350 MHz bandwidth
- Input divider: 10: 1
- Input capacitance 9.5 pF
- Input resistance: 10 MΩ when the probe is connected to an oscilloscope input with 1 MΩ
- Compensation range of the input capacitance of an oscilloscope: 10 to 25 pF
- maximum input voltage: 400 V CAT I and 300 V CAT II
- Cable length 1.3 m
- BNC connection with readout
- ideal in combination with Keysights (formerly Agilent) InfiniiVision and Infiniium oscilloscopes with models that have a bandwidth of <350 MHz
Technical Data
Documents & Downloads
Description
N2872A | Probe, Passive 10X, 350MHz, BNC Read Out
The passive Keysight (formerly Agilent's electronic measurement technology) probe N2872A offers a bandwidth from 0 to 350 MHz and an attenuator of 10: 1 and is intended for general use. The small diameter of the probe tip of 2.5 mm, the small input capacity and the large number of accessories, especially for small pin spacings, make it ideal for measurements on ICs or surface-mount components (SMD). The sharp tip is designed with a spring, so that it is held in the middle of an IC connector by a special insulated bracket, preventing a short circuit to neighboring IC pins. Special adapters for good ground contact are also available. This probe is ideal for all Keysight InfiniiVision and Infiniium oscilloscopes (formerly Agilent's electronic measurement technology) with an input resistance of 1 MΩ and a bandwidth <350 MHz.