Keysight N2801A | Probe, active, differential 20 GHz, InfiniiMax III, AutoProbe II

Manufacturer number: N2801A

Keysight N2801A 20 GHz InfiniiMax III Series probe amplifier for Infiniium oscilloscopes.

  • 20 GHz bandwidth, directly on the probe tip
  • Rise time: 27.1 ps
  • Lowest probe and oscilloscope noise on the market
  • Best accuracy and trace response on the market in terms of bandwidth and noise.
  • The probe amplifiers saved their individual S parameters in order to achieve significantly better correction and compensation.
  • The bandwidth of the probe can be upgraded.
  • Some probe amplifiers are available for different applications
  • DC attenuator ratio: 6: 1 (3: 1 with 200 Ω Zif-Tip)
  • Input voltage range: 1.6 Vpp (0.8 Vpp with 200 Ω Zif-Tip)
  • Input voltage in common mode: ± 12 V to 250 Hz, ± 2.5 V at> 250 Hz, (± 6V at DC to 250 Hz, ± 1.25 V at> 250 Hz with 200 Ω ZIF-Tip)
  • Offset range: ± 16 V when measuring a single-ended signal
  • Input impedances:
    DC input resistance: Rdiff = 100 kΩ ± 2%, Rse = 50 kΩ ± 2% (diff = differential, se = single-ended)
    Input resistance at> 10 kHz: Rdiff = 1 kΩ, Rse = 500 Ω
    Input capacitance: Cdiff = 32 fF, Cse = 48 fF (with ZIF sample head)

Fasteners:

  • N5445A InfiniiMax III browser
  • N5439A InfiniiMax III ZIF sample head
  • N5444A InfiniiMax III 2.92 mm / 3.5 mm / SMA sample head
  • N5441A InfiniiMax III solderable probe head

Independant Consulting

More than 50 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Documents & Downloads

Detaildescription

N2801A | Probe, active, differential 20 GHz, InfiniiMax III, AutoProbe II

The InfiniiMax III probe system offers the largest bandwidth, along with the lowest load for the measuring point, in order to open a new chapter in measuring accuracy and measuring signal reproduction. Four different InfiniiMax III probe amplifiers are available, from 16 GHz to 30 GHz to adapt to your measurement conditions and ultimately also to the budget.

An InP (indium phosphide) IC process used by Keysight offers a 200 GHz cut-off frequency with rear ground connections. The first thick film technology implemented with this IC technology, used for the InfiiniMax III probe systems, in order to obtain the best performance for your measurement task. No other product on the market can keep up with this.

Accessoires (4 products )

Keysight N5445A
InfiniiMax III Browser Probe Head 30 GHz bandwidth
Delivery time upon request
On Request
Keysight N5439A
InfiniiMax III ZIF probe head, 28 GHz bandwidth
Delivery time upon request
On Request
Keysight N5444A
InfiniiMax III 2.92mm differential probe head 28 GHz bandwidth
Delivery time upon request
On Request
Keysight E2655C
Probe deskew and performance verification kit
Reordered - in stock. Delivery time on request
On Request

Recommendations (1 product )

Keysight N5439A
InfiniiMax III ZIF probe head, 28 GHz bandwidth
Delivery time upon request
On Request

About the Manufacturer

Keysight
dataTec and Keysight Technologies have had a strong partnership since 1999. No other company offers such a wide range of measurement technology, testing solutions, and solutions for our connected world. With Keysight's measuring instruments, you are also well-equipped for today's and tomorrow's tasks.

Last Seen Products

Product added to compare
Product Compare added Product Compare