Keysight E5063A ENA | Vector network analyzer, 2-port, 100 kHz to 500 MHz / 1.5 / 3 / 4.5 / 6.5 / 8.5 / 14
Manufacturer number: E5063A
On Request
Keysight E5063A | ENA network analyzer, 100 kHz to 500 MHz / 1.5 / 3 / 4.5 / 6.5 / 8.5 / 14/18 GHz.
- Frequency range: 100 kHz to 18 GHz (depending on the option)
- 2-port measurement, 50 Ω
- Output power: -20 dBm to 0 dBm
- S-parameter test set
- Dynamic range: 117 dB (specified), 122 dB (typical)
- Base noise: 0.005 dBrms (specified), 0.002 dBrms (typical)
- Stability: 0.01 dB / ° C
- For production applications, two additional U1810B coaxial switching relays can measure four DUTs. The switching relays are switched by the application software (SCPI commands) running on the E5063A.
- Tracking generator output power: -20 to 0 dBm
- Sweep modes: linear, logarithmic, segmented frequency response
- Number of measuring points / channel: 10 001/12 channels
- Calibration: ECal, SOLT (Short, Open, Load, Through), Adapter, TRL cal (through reflect line)
- Software: Simulator for test recording, time domain analysis (TDR), test wizard (option 1)
- Interfaces: LAN, USB (front plate: 2 pieces, rear: 4 pieces), USBTMC, GPIB, I / O interface for automatic test systems (handlers)
- Dimensions: Width: 444 mm, Height: 235 mm, Depth: 277 mm
- Weight: 11 kg
- Antenna test for smart phones, measurements at base stations for mobile radio, WLAN and other general data transmission from mobile devices
- Measuring passive components that are to be used in the HF range, e.g. B. RF cables, RF connectors, couplers, isolators and filters
- Printed circuit board test to verify the impedance of conductor tracks
The ideal solution for impedance measurements on conductor tracks with high accuracy.
The network analyzer E5063A of the ENA series fulfills the requirements that are required by a measuring device for the qualification of printed circuit boards in production. Compared to the TDR solutions with oscilloscopes, the E5063A offers the following main functions:
- Higher accuracy and R & R (Repetability & Reproducibility / repeatability & comparability) for exact repeatability and comparability of the measurements
- More languages for better usability of the devices and for the feasibility of the measurements in the respective national language
- Higher ESD robustness, thereby minimizing the error rates of the measuring device due to electrostatic charging.
- In addition, the best and most cost-effective solution for measuring impedances on a printed circuit board
The PCB analyzer consists of the network analyzer E5063A of the ENA series and the TDR option 011. The network analyzer offers measurements in the frequency domain, option 011 extends the measurements for the time domain and also offers a specific GUI (graphical user interface) Interface) for displaying the measurement results in the PCB test.
Documents & Downloads
Description
E5063A ENA | Vector network analyzer, 2-port, 100 kHz to 500 MHz / 1.5 / 3 / 4.5 / 6.5 / 8.5 / 14
The best price-performance ratio: The E5063A network analyzer (Network Analyzer) is ideal for testing electrical components that must be measured up to the 18 GHz range. With the low entry price, it meets your technical requirements and your budget.
It offers the measurement environment and the measurement options of the ENA series, which has since become the industry standard. This network analyzer provides investment security in the future and will be considered a technological advancement, because the E5063A increases your effectiveness and productivity by making measurements faster, easier and less complicated.