HT FULLTEST3 | Machine / system tester VDE 0113 / EN60204-1 (1009650)
Manufacturer number: 1009650
On Request
HT-Instruments 1009650 | FULLTEST3 machine & system tester according to VDE 0113 / EN60204-1.
- Display: TFT LCD color display 4.3 "with touchscreen
- Power supply: 207 ... 253 V / 50/60 Hz ± 5% / max. 16 A
- Memory: 999 measured values, 3 levels
- Interface: 3 x USB 2.0, Bluetooth
- Security: IEC / EN 61010-1
- Electrical protection: T16 / 250 V, FF 12.5 A / 500 V, F 20 A /
- Overvoltage category: CAT III 300 V
- Dimensions: H 170 mm x W 300 mm x D 400 mm
- Weight: 15 kg
Technical Data
All-current sensitive RCDs type B, B+: | Type B |
---|---|
Article number: | 1009650 |
Automatic test sequence: | No |
Check residual voltage: | Yes |
DIN VDE 0100-600: | No |
DIN VDE 0105-100: | No |
DIN VDE 0113-1 / IEC 60204-1: | Yes |
Dimensions (L x W x H) (mm): | 400 x 300 x 170 |
High voltage test AC: | 250 - 5100 V |
High voltage test DC: | No |
Insulation measurement 50V: | No |
Insulation measurement 100V: | Yes |
Insulation measurement 250V: | Yes |
Insulation measurement 325V: | No |
Insulation measurement 500V: | Yes |
Insulation measurement 1000V: | Yes |
Interfaces: | Bluetooth, USB |
Measured value memory: | 1999 |
Mobile: | Yes |
Model: | HT FULLTEST3 |
Selective, SRCDs, PRCDs, type G/R: | No |
Software included: | TOPVIEW |
Stationary: | No |
Warranty (years): | 2 |
Weight (kg): | 14 |
e-Mobility (prepared): | No |
Documents & Downloads
Description
FULLTEST3 | Machine / system tester VDE 0113 / EN60204-1 (1009650)
The portable test device Fulltest 3 enables you to carry out a safety test and CE certification of electrical devices, systems and control cabinets in accordance with the guidelines of EN60204-1: 2006. It can also be used for testing electrical equipment after repair and maintenance.
The portable machine and system tester is operated simply and easily via the 4.3-inch TFT touch screen display. Program the test duration and limit values, save up to 999 measured values in the internal memory or transfer them via USB to a PC or USB stick. A keyboard, mouse or barcode reader connection can also be connected via the 3 USB interfaces. The HT Instruments Fulltest 3 has a Bluetooth connection.
Measurement functions:
- Continuity test of the protective conductor with 200mA DC
- Continuity test of the protective conductor with I> 25A, U <12V AC
- Insulation resistance with 100, 250, 500, 1000 VDC test voltage
- High voltage test with test voltage adjustable from 250V to 5100V AC
- Residual voltage measurement on internal capacitance and mains plug
- Residual current measurement internally via Schuko socket
- Leakage current measurement with external current transformer (HT96U optional accessory)
- Test on RCDs type A, AC, B General, selective, up to 1000mA, also selective RCD
- Mains / loop impedance and Ik calculation
- Mains / loop impedance with high resolution and up to 50kA (with IMP57 optional accessories)
- Testing on overcurrent protection devices with curves B, C, D, K and type of fuse
- Selection of length, cable type, insulation of the cable, tripping time of the protective device
- Loop resistance without RCD tripping
- Phase sequence display
Lieferumfang
- 4 x measuring lines: 2x red, 1x blue, 1x black, 3 m
- Schuko cable with 3-conductor banana plug
- 2 x safety measuring leads up to 5 kV
- 6 x test probes CAT III
- 4 x alligator clips
- TOPVIEW protocol software for Windows
- USB cable
- Protective bag for accessories
- ISO 9000 calibration protocol
- operation manual
Accessoires (6 products )
Recommendations (7 products )
News and Knowledge
The DIN VDE regulations govern the electrotechnical regulations as defined by DGUV V3 (accident prevention regulations f...
Thomas Schleich is an engineer, an expounder of ideas, a free spirit – and a first-class speaker at the dataTec Academy....