GW Instek PSB-2400L2 | Power supply unit, DC, 2 channel 2x 80V / 40A, 800W, USB, RS-232, analog
Manufacturer number: PSB-2400L2
GW Instek PSB-2400L2 | Programmable 2-channel DC laboratory power supply, multi-range, 2 x 80 V DC / 40A, 800W.
Technical Data
AC input: | 100 V - 240 V |
---|---|
Article number: | 0TSB24L200GT |
Autorange: | No |
Bidirectional: | No |
DC output reversible: | DC Source |
Dimensions (L x W x H) (mm): | 290 x 210 x 124 |
Interfaces: | USB, RS232 optional: IEEE488 |
Model: | PSB-2400L2 |
Number of outputs: | 2 |
Output power (kW): | 0.8 |
Protective devices: | OVP, OCP, OHP |
Weight (kg): | 7 |
max. Power (A): | 40 |
max. Voltage (V): | 80 |
Description
PSB-2400L2 | Power supply unit, DC, 2 channel 2x 80V / 40A, 800W, USB, RS-232, analog
The PSB-2000 series is a programmable and multi-stage DC power supply with high power density. The multi-range output enables flexible collocations of higher voltage and larger current in the nominal power range. Both series and parallel connections can be used for the PSB-2000 series to meet the requirements of the higher performance range.
The PSB-2000 series offers three sets of preset function keys to store frequently used voltage, current and power settings that users can quickly recall. The sequence function can be connected to a computer via RS232C, a USB interface or an optional GPIB interface in order to generate an output power which is defined by the sequence of a series of voltage and current steps set via the computer. This function is often used to establish a standard test procedure for checking the influence on the test specimens caused by the rapidly changing operating conditions.
The PSB-2000 series protects against overvoltage and overcurrent. The power supply output function is turned off to protect the DUTs when the protection mechanism is triggered. When charging the battery, the PSB-2000 series Hi-W mode prevents reverse current that could damage the power supply. The PSB-2000 series offers an analog controller and analog monitor interfaces on the back to control the PSB-2000 output via the external voltage or to monitor the voltage and current output status of the power supply externally. The PSB-2000 panel can be rotated 90 degrees and is suitable for vertical or horizontal positions in order to optimally use the space.
Key Features & Specifications:
- Output voltage: 2x 0 ~ 80V
- Output Current: 0 ~ 40 A
- Output power: 2x 400 W.
- Constant Power Output for Multi-Range (V&I) Operation
- Series and Parallel Operation (2 units in series or 4 units in parallel maximum)
- Sequence function edited by PC will be controlled through power supply
- Standard interface: RS-232C / USB / Analog Control Interface
- Optional interface: GPIB
- Dimension: 210 (W) x 124 (H) x 290 (D) mm
Accessoires (12 products )
Alternate products (38 products )
Recommendations (41 products )
News and Knowledge
With the increasing importance of renewable energies in the wake of climate change, solar energy is moving further into ...
Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...
About the Manufacturer
Good Will has been listed on the Taiwan Stock Exchange since 2000. Development and production focus on high quality and low cost measuring instruments for production, laboratory and education. Headquartered in Taipei, Good Will has subsidiaries in China, America, Japan, Korea and Malaysia. The products are sold in over 80 countries.