GW Instek PEL-3323 | Electronic load, in the cabinet 150V / 630A, 3150W, USB, RS-232

Manufacturer number: PEL-3323

GW Instek PEL3323 | Programmable electronic 1-channel DC load 1.5 - 150 V DC / 0 - 630 A / max. 3.150 W power in a 19 inch cabinet with 13 U.

  • Consists of 3 PEL-3111 units connected in parallel (1,050 W each)
  • Each 1-channel unit PEL-3111 programmable from the front
  • Total power: 3,150 W.
  • Voltage range (DC): 1.5 V ~ 150 V DC
  • Current range: 0 ~ 630 A
  • 7 operating modes: CC / CV / CR / CP / CC + CV / CR + CV / CP + CV
  • Adjustable protection functions (OCP, OVP, OPP, UVP)
  • High current increase rate: max. 16 A / µs
  • Program sequence function: GO / NO-GO test
  • Sequence function for the simulation of high-performance loads
  • Program commands compatible with the Kikusui PLZ-4W series
  • Dynamic load behavior: 0.0166 Hz ~ 20 kHz
  • Soft start function: Off / On (1 ms ~ 200 ms, resolution 1 ms)
  • Timer function: display of the operating time of the activated load and automatic switch-off (1s to 999 h 59 min 59 s)
  • Configuration memory for 100 settings
  • Analog interface
  • Digital interfaces: USB 2.0 device / host, RS-232C, GPIB (optional)
  • LabVIEW / USB driver downloadable
  • Power supply: AC 100 V ~ 230 V ± 10%; 47 Hz ~ 63 Hz
  • Weight: approx.85.5 kg
  • Dimensions: W598 x H611 x D706 mm
  • Supplied accessories: operating instructions, power cord, protective cover, insulation board, connection cable GTL-255 for parallel connection

Independent Consulting

More than 50 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Technical Data

Documents & Downloads

Description

PEL-3323 | Electronic load, in the cabinet 150V / 630A, 3150W, USB, RS-232

The programmable electronic single-channel load of the PEL-3000 series is characterized by very fast load control mechanisms, a fast current increase rate of 16 A / µs and a high resolution of 0.01 mA.

This robust electronic load (current sink / electronic load resistor) is ideal for testing / load simulation of a wide variety of power conversion products, including AC / DC and server power supplies, DC / DC converters, batteries in electric vehicles, charging stations for automobiles and other components of power electronics.

In order to process higher outputs, several devices were connected in parallel using a master / slave technology. With their flexible power combinations, the electronic loads of the PEL3000 series from GW Instek meet all test requirements in today's high-performance supply.

Accessoires (3 products )

GW Instek GTL-246
USB cable type A to type B 1.2m for GDS / GLA / GSP / GPD / GLC9000 / AFG2000 / 3000 / PEL
Delivery time upon request
€10.00
GW Instek GTL-248
GPIB cable, shielded, 2m for GPT-9900
Delivery time upon request
€153.00
GW Instek PEL-004
GPIB card For PEL-3000 series
Delivery time upon request
€371.00

Alternate products (8 products )

GW Instek PEL-3212
Electronic load, in the cabinet 150V / 420A, 2100W, USB, RS-232
Delivery time upon request
€11,441.00
GW Instek PEL-3535
Electronic load, in the cabinet 150V / 1050A, 5250W, USB, RS-232
Delivery time upon request
€27,052.00
GW Instek PEL-3955
Electronic load, in the cabinet 150V / 1890A, 9450W, USB, RS-232
Delivery time upon request
€23,749.00
GW Instek PEL-3322
Electronic load, in the cabinet 150V / 630A, 3150W, USB, RS-232
Delivery time upon request
€10,275.00
GW Instek PEL-3424
Electronic load, in the cabinet 150V / 840A, 4200W, USB, RS-232
Delivery time upon request
€21,898.00
GW Instek PEL-3533
Electronic load, in the cabinet 150V / 1050A, 5250W, USB, RS-232
Delivery time upon request
€13,955.00
GW Instek PEL-3744
Electronic load, in the cabinet 150V / 1470A, 7350W, USB, RS-232
Delivery time upon request
€19,314.00
GW Instek PEL-3111
Electronic load 150V / 210A, 1050W, USB, LAN
Ready to ship in 5 to 10 business days
€3,893.00

Recommendations (2 products )

GW Instek PEL-3111
Electronic load 150V / 210A, 1050W, USB, LAN
Ready to ship in 5 to 10 business days
€3,893.00
GW Instek PEL-3211
Extension unit for PEL-3111 2100W
Ready to ship in 5 to 10 business days
€4,301.00

News and Knowledge

Applications

With the increasing importance of renewable energies in the wake of climate change, solar energy is moving further into ...

13/02/2024
Reading time 5 Min.
619
2
Future & Trends

Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...

17/03/2021
Reading time 5 Min.
257
0

About the Manufacturer

GW Instek
GW Instek was founded in 1975 as Good Will Co. Ltd in Taiwan. Since the beginning, the company has specialized in the development and production of electronic test and measurement equipment. The first product focus was power supplies. Today, Good Will has more than 300 different products from the fields of oscilloscopes, spectrum analyzers, signal generators, digital multimeters and LCR measuring instruments in its program.

Good Will has been listed on the Taiwan Stock Exchange since 2000. Development and production focus on high quality and low cost measuring instruments for production, laboratory and education. Headquartered in Taipei, Good Will has subsidiaries in China, America, Japan, Korea and Malaysia. The products are sold in over 80 countries.

Last Seen Products

Product added to compare
Product Compare added Product Compare