GW Instek LCR-8230 | LCR meter LCR-8200 series, 10 Hz - 30 MHz, DC, USB, GPIB, LAN, RS-232
Manufacturer number: LCR-8230
GW Instek LCR-8230 | LCR meter, 10 Hz - 30 MHz, DC, USB, GPIB, LAN, RS-232.
- Test frequency: DC, 10 Hz ... 30 MHz
- Display: 7-inch LCD color display
- Base Accuracy: 0.08%
- Simultaneous numerical display of four measurement results from 17 freely selectable measurement parameters
- 15 steps list measurement
- Two curve sweep mode
- USB memory available
- ALC function available
- Standard interfaces: RS-232C, USB, LAN, GPIB and handler
- Dimensions: 145mm x 335mm x 346mm
- Weight: ~ 3.3kg
Technical Data
Accuracy: | 0,08 % |
---|---|
Article number: | 01CR82H100GT |
Compensation functions: | Yes |
DC Bias: | internal: 12V |
Dimensions (L x W x H) (mm): | 335 x 346 x 145 |
Displayable measurement parameters: | Cp, Cs, Lp, Ls, Rs, Rp |
Handlerinterface: | Yes |
Interfaces: | USB, LAN, GPIB, RS-232 |
Listsweep: | Yes |
Measurement functions: | Z, L, C, R, DCR, LCZ |
Model: | LCR-8230 |
Resolution: | 6-Digits |
Special features: | graphic display |
Testadapter: | Yes (Axial, Radial, SMD) |
Testlimits: | Yes |
Warranty (years): | 1 |
Weight (kg): | 3.3 |
max. Frequency range (MHz): | 30 |
min. Frequency range (Hz): | 10 |
Documents & Downloads
Description
LCR-8230 | LCR meter LCR-8200 series, 10 Hz - 30 MHz, DC, USB, GPIB, LAN, RS-232
GW Instek High Frequency LCR Meter LCR-8200 Series has five models with maximum test frequency up to 30MHz. The GW Instek LCR-8230 model has a test frequency of 10 Hz ... 30 MHz. All devices in the series have a 7-inch color display and a high basic measuring accuracy (0.08%).
Up to four measured variables such as impedance, capacitance, inductance or phase angle can be displayed numerically at the same time. A frequency sweep is also available for two measurement parameters in the graphic display. This helps you to optimally interpret the properties of the test object.
At the same time, the wide range of standard interfaces (USB / RS-232C / Handler Interface and GPIB) allows you to control the instrument via the most common interfaces without worrying about additional hardware investment costs. In graphic mode, the GW Instek LCR-8200 series LCR meters also offer a USB memory function. The measured characteristic curves and values of the test object are saved for later evaluation.
Due to the large number of functions of the LCR-8200, you can easily react to the changing test requirements of passive components in research and development as well as in production.
Lieferumfang
- LCR meter
- safety instructions
- Manual on CD
- power cord
- LCR-06B test lead
About the Manufacturer
Good Will has been listed on the Taiwan Stock Exchange since 2000. Development and production focus on high quality and low cost measuring instruments for production, laboratory and education. Headquartered in Taipei, Good Will has subsidiaries in China, America, Japan, Korea and Malaysia. The products are sold in over 80 countries.