GW Instek MDO-2202EG | Special offer / demonstration unit oscilloscope, 2 channel, spectrum analyzer, 200 MHz, 1 GSa/s, 10 MPts, USB, LAN, Arb. Gen. (GW1027_1910_V)

Name: MDO-2202EG | Special offer / demonstration unit oscilloscope, 2 channel, spectrum analyzer, 200 MHz, 1 GSa/s, 10 MPts, USB, LAN, Arb. Gen. (GW1027_1910_V)
Brand: GW Instek
SKU: GW1027_1910_V
Price: 762.0 EUR
Availability: InStock

Manufacturer number: GW1027_1910_V

1 in stock. Ready to ship in 1 business day

€762.00

% €1,524.00 (50% saved)

plus VAT. €906.78 VAT plus shipping costs

or choose one of the following options:

Product inquiries

Special offer - GW Instek MDO2202EG | 2-channel multi-function and mixed-domain oscilloscope with a bandwidth of 200 MHz, with integrated spectrum analyzer DC - 500 MHz and a 2-channel arbitrary generator 25 MHz.

Bandwidth: 200 MHz
2 channels
Maximum real-time sampling rate: 1 GSa/s
Memory depth 10 Mpoints per channel
Segmented memory: divisible into 29,000 areas
VPO (Visual Persistence Oscilloscope) Waveform Display Technology for more signal information similar. as with analog oscilloscopes
Signal acquisition rate up to 120,000 wfs/s
38 automated measurements
Built-in spectrum analyzer with 0 to 500 MHz bandwidth
FFT function: A maximum of 1M FFT produces higher measurement resolution in the frequency range
High-pass, low-pass and band-pass filter functions
Decoding and trigger function for serial buses such as: I²C/SPI/UART/CAN/LIN
Mask test
Frequency Response Analyzer FRA (Bode Plot) application (from firmware V1.34 or later)
Data logger function can record signal changes up to 1,000 hours record
Built-in AWG arbitrary generator: Two-channel, 25 MHz, 200 MSa/s, 14 bit, memory depth 16 k points
Standard waveforms: Sine (25 MHz), square (15 MHz), pulse, ramp (1 MHz), DC, noise, Lorentz, exponential rising edge, exponential falling edge, Haversine and cardiogram function
Display: approx. 20 cm screen diagonal (8 inch) WVGA TFT LCD display
Network storage function
Interfaces: High Speed USB, host port, LAN, Go/NoGo-BNC
Dimensions: W 384 x H 208 x D 127.3 mm
Weight: approx. 3 kg

Standard accessories:

Power cable, calibration certificate, CD-ROM (with quick start guide, operating instructions, programming manual)
One passive probe per channel
GTL-110 BNC to BNC cable

Independent Consulting

More than 50 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Technical Data

Device type:	Spectrum analyzer
Special item type:	Demonstration unit

Documents & Downloads

Datasheet

pdf | 0.66 MB

Description

MDO-2202EG | Special offer / demonstration unit oscilloscope, 2 channel, spectrum analyzer, 200 MHz, 1 GSa/s, 10 MPts, USB, LAN, Arb. Gen. (GW1027_1910_V)

The oscilloscope of the MDO-2000E series offers a bandwidth of 200 MHz and a real-time sampling rate of 1 GSa/s. The display and the 1 mV/div vertical resolution enable the MDO-2000E series to measure complex and weak signals and present the clear measurement results.

The multi-domain oscilloscopes of the MDO-2000E series offer a memory depth of an incredible 10 Mpts as standard in order to fully recall and analyze the signal. Depending on the measurement application, the memory depth can be set to 1 k, 10 k, 100 k, 1 M or 10 M. A short memory depth in combination with the high sampling rate enables the user to observe a rapidly changing waveform and, on the other hand, by choosing a large memory depth, you can verify constantly, slowly changing curves.

With the standard Segmented Memory function, the acquisition memory is divided into a maximum of 29,000 segments in order to make optimal use of the 10 Mpts memory depth available to you. Signal shapes that are of particular interest can be triggered on and stored in the segmented memory (each trigger event fills a segment). This greatly increases memory effectiveness.

The MDO-2000E oscilloscope series is equipped with a "waveform search function" and a segmented memory to extend the signal observation time of the flexible 10 Mpts memory. The segmented memory can be divided into 29,000 areas in order to bypass uninteresting signal sequences and to be able to search through all essential signal sequences. This allows important signal sequences to be displayed and saved. With the "waveform search function" users can quickly search the desired waveforms according to the set trigger conditions.

The MDO-2000E mixed domain oscilloscope series allows users to easily and completely observe the power-up behavior and rare transient waveforms. This facilitates waveform debugging by using the advanced VPO (Visual Persistence Oscilloscope) signal processing technology, which achieves a signal update of 120,000 wfm/s and overwrites these respective waveforms on the screen to achieve a multi-layered waveform display and thus an improved representation of the signals. Oscilloscopes with VPO technology display the signals in a 3-dimensional arrangement of amplitude, time and signal strength for each signal point. 256 different colors indicate signal changes. Compared with a conventional Digital storage oscilloscope, the MDO-2000E series offers a much more natural and true display that corresponds to the real signal.

Integrated spectrum analyzer

If you use the spectrum analyzer mode, the frequency level is shown on the display. Users can enter various characteristic parameters, depending on the application requirements, such as the display center frequency, displayed frequency range (span), start frequency and stop frequency. This allows the required frequency range to be examined very quickly and intuitively. The user interface corresponds to a real spectrum analyzer.
Signal characteristics and components can be recognized much more easily in the frequency level than in the time level. For example, the composition of the signal harmonics or the frequency characteristics of a modulation signal.

Please note: Special items may show signs of wear. Special items have a 1-year manufacturer's guarantee. Subject to prior sale. The configuration of a special item cannot be changed.

Give us a call, we will be happy to advise you personally:

07121 / 51 50 50

You can find the current special item list as a PDF download here:

>>> To the dataTec special items list

Alternate products (1 products )

Alternate products (1 product )

GW Instek MDO-2202EG

Oscilloscope, 2 channels, spectrum analyzer, 200 MHz, 1 GSa / s, 10 MPts, USB, LAN, working gen.

Delivery time upon request

€1,551.00

About the Manufacturer

GW Instek

GW Instek was founded in 1975 as Good Will Co. Ltd in Taiwan. Since the beginning, the company has specialized in the development and production of electronic test and measurement equipment. The first product focus was power supplies. Today, Good Will has more than 300 different products from the fields of oscilloscopes, spectrum analyzers, signal generators, digital multimeters and LCR measuring instruments in its program.

Good Will has been listed on the Taiwan Stock Exchange since 2000. Development and production focus on high quality and low cost measuring instruments for production, laboratory and education. Headquartered in Taipei, Good Will has subsidiaries in China, America, Japan, Korea and Malaysia. The products are sold in over 80 countries.

Read more

Last Seen Products