The oscilloscope of the MDO-2000E series offers a bandwidth of 70 MHz and a real-time sampling rate of 1 GSa/s. The display and the 1 mV/div vertical resolution enable the MDO-2000E series to measure complex and weak signals and present the clear measurement results.
The multi-domain oscilloscopes of the MDO-2000E series offer a memory depth of an incredible 10 Mpts as standard in order to fully recall and analyze the signal. Depending on the measurement application, the memory depth can be set to 1 k, 10 k, 100 k, 1 M or 10 M. A short memory depth in combination with the high sampling rate enables the user to observe a rapidly changing waveform and, on the other hand, by choosing a large memory depth, you can verify constantly, slowly changing curves.
With the standard Segmented Memory function, the acquisition memory is divided into a maximum of 29,000 segments in order to make optimal use of the 10 Mpts memory depth available to you. Signal shapes that are of particular interest can be triggered on and stored in the segmented memory (each trigger event fills a segment). This greatly increases memory effectiveness.
The MDO-2000E oscilloscope series is equipped with a "waveform search function" and a segmented memory to extend the signal observation time of the flexible 10 Mpts memory. The segmented memory can be divided into 29,000 areas in order to bypass uninteresting signal sequences and to be able to search through all essential signal sequences. This allows important signal sequences to be displayed and saved. With the "waveform search function" users can quickly search the desired waveforms according to the set trigger conditions.
The MDO-2000E mixed domain oscilloscope series allows users to easily and completely observe the power-up behavior and rare transient waveforms. This facilitates waveform debugging by using the advanced VPO (Visual Persistence Oscilloscope) signal processing technology, which achieves a signal update of 120,000 wfm/s and overwrites these respective waveforms on the screen to achieve a multi-layered waveform display and thus an improved representation of the signals. Oscilloscopes with VPO technology display the signals in a 3-dimensional arrangement of amplitude, time and signal strength for each signal point. 256 different colors indicate signal changes. Compared with a conventional digital storage oscilloscope, the MDO-2000E series offers a much more natural and authentic display that corresponds to the real signal.
Integrated spectrum analyzer
If you use the spectrum analyzer mode, the frequency level is shown on the display. Users can enter various characteristic parameters depending on the application requirements, such as the display center frequency, displayed frequency range (span), start frequency and stop frequency. This makes it possible to examine the required frequency range very quickly and intuitively. The user interface corresponds to a real spectrum analyzer.
Signal characteristics and components can be recognized much more easily in the frequency level than in the time level. For example, the composition of the signal harmonics or the frequency characteristics of a modulation signal.
Please note: Special items / stock sales are in their original packaging and unused. All special items are guaranteed for 1 year. Subject to prior sale. The configuration of a special item cannot be changed. The calibration of a special item may no longer be up to date. If you would like an up-to-date calibration, please contact our experts.
Give us a call, we will be happy to consult you personally:
+49 (0)7121 / 51 50 50
