Gossen Metrawatt Z525F | METRALINE PRO-TYPE EM 1-/3-phase test adapter for e-charging points

Manufacturer number: Z525F

Gossen Metrawatt Z525F | METRALINE PRO-TYPE EM 1-/3-phase test adapter for e-charging points.

  • Type 2 connector
Simulation of four states according to IEC 61851
  • State A no vehicle connected
  • State B Vehicle connected but not ready for charging
  • Condition C Vehicle connected and ready for charging, charging area ventilation not required
  • Status E error - Short circuit CP - PE via internal diode
Simulation of different codings for charging cables
  • 13A cable 1.5kΩ
  • 20A cable 680Ω
  • 32A cable 220Ω
  • 63A cable 100Ω
Security
  • Protection class II
  • Test voltage 3.5 kV AC
  • Measurement category CAT III 300 V
  • Pollution degree 2
Dimensions, weight and environmental conditions
  • Housing: W×L×H = 105 mm × 210 mm × 53 mm
  • Complete with connector: W×L×H = 105mm × 750mm × 62mm
  • Weight approx. 795g
  • Degree of protection IP20
  • Operating temperature -10 C - +45 C
  • Storage temperature -25 C - +60 C
  • Relative humidity max. 80%. Condensation excluded

Independent Consulting

More than 50 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Documents & Downloads

Description

Z525F | METRALINE PRO-TYPE EM 1-/3-phase test adapter for e-charging points

The METRALINE PRO-TYPE EM I (Z525F) test adapter is used in the development and maintenance of e-charging points. The Gossen Metrawatt Z525F test adapter is suitable for VDE tests on e-charging points according to IEC 61851, both for initial commissioning and for repeat tests. It was designed for use with the Gossen Metrawatt device tester PROFITEST MTECH+ (IQ) or MXTRA (IQ). Various states of an electric vehicle can be simulated using a rotary switch on the test adapter. The charging station socket becomes live and can be tested with the PROFITEST MTECH+ (IQ) and MXTRA (IQ) test devices, for example. The measuring cables of the Profitest Master are connected via 4 mm safety sockets (L1, L2, L3, N, PE).

Lieferumfang

  • 1 PRO-TYP EM test adapter
  • 1 instruction manual

Accessoires (1 product )

Gossen Metrawatt Z700G
F2010 universal carry bag for PROFITEST INTRO
Ready to ship in 5 to 10 business days
€285.00

Alternate products (2 products )

Gossen Metrawatt M514R
PROFITEST REMOTE test adapter for PROFITEST MTECH +, MXTRA and PRIME
Ready to ship in 5 to 10 business days
€1,365.00
Gossen Metrawatt Z525B
PRO-TYPE I test adapter for e-charging stations 1-phase for VDE test device Profitest MXTRA and MTECH +
Ready to ship in 5 to 10 business days
€1,076.00

News and Knowledge

Applications

dataTec unboxed is the new video series from dataTec for product presentations and news from the world of measurement an...

01/08/2023
Reading time 10 Min.
426
2
Measurement Tip

The DIN VDE regulations govern the electrotechnical regulations as defined by DGUV V3 (accident prevention regulations f...

10/01/2023
Reading time 7 Min.
1156
3
Future & Trends

Thomas Schleich is an engineer, an expounder of ideas, a free spirit – and a first-class speaker at the dataTec Academy....

08/03/2022
Reading time 4 Min.
239
1

About the Manufacturer

Gossen Metrawatt
Safety through competence. With over 100 years of experience, Gossen Metrawatt offers you unique products for measurement and testing technology as well as industrial metrology. The products stand for quality, reliability, safety and progressiveness, but also for dynamic and ergonomic design, high ease of use and unique innovative spirit.

Last Seen Products

Product added to compare
Product Compare added Product Compare