Gossen Metrawatt METRALINE PAT | Device tester / test device, VDE 0701-0702, 200 mA (M711A)
Manufacturer number: M711A
Gossen Metrawatt M711A | PAT safety tester METRALINE PAT for tests acc. DGUV regulation 3, DIN VDE 0701-0702.
- Display: multiple displays using a dot matrix, 320 x 240 dots, backlit display
- Test voltage: 2.3 kV 50 Hz
- Measurement category: 250 V CAT II
- Dimensions WxHxD 230x 175x 95 mm
- Weight about 1.3 kg
- 1 year warranty
Technical Data
Article number: | M711A |
---|---|
Automatic test sequence: | No |
DIN VDE0544-4 / IEC 60974-4: | No |
DIN VDE 0701-0702: | Yes |
DIN VDE 0751 / IEC62353: | No |
Differential power: | 0,00 - 20,00 mA |
Dimensions (L x W x H) (mm): | 23 x 75 x 95 |
EN 50678 (prepared): | No |
EN 50699 (prepared): | No |
Earth conductor 10A: | No |
Earth conductor 25A: | No |
High voltage test DC: | No |
Interfaces: | Bluetooth, USB |
Isolation: | 10 - 20 MΩ |
Measured value memory: | No |
Mobile: | Yes |
Model: | METRALINE PAT |
Protective earth less than 200mA: | Yes |
Software included: | IZYTRONIQ |
Stationary: | No |
Touch Display: | No |
Weight (kg): | 1.3 |
Documents & Downloads
Description
METRALINE PAT | Device tester / test device, VDE 0701-0702, 200 mA (M711A)
The Gossen Metrawatt METRALINE PAT is an intuitive safety tester for testing protective measures on portable equipment in accordance with DGUV regulation 3, DIN VDE 0701-0702.
With the PAT tester M711A, you can carry out all active tests including a function test with a true RMS power display in just one step. The operation of the PAT tester is very intuitive. Individual measurements can be selected quickly using direct selection buttons.
Product features:
- Fast grid reversal with load current monitoring
- Automatic limit adjustment (protective conductor, insulation, substitute leakage current)
- Automatic shutdown in case of dangerous fault current of the test object
- Short-circuit check of the device under test
- Two-pole measurement (low resistance, insulation, substitute leakage current, voltage)
- Plain text operation with block diagrams and green / red LED display for OK / error
- Bluetooth interface for tablet and USB interface for PC operation
- Data transfer in software IZYTRONIQ via ELEXONIQ Android APP
- Large, high-contrast display
- Compact design, light weight
Lieferumfang
- Security tester
- Measuring line 2m red
- Power cord 1.5m black
- Equipment case
- Factory calibration certificate
- operation manual
News and Knowledge
The DIN VDE regulations govern the electrotechnical regulations as defined by DGUV V3 (accident prevention regulations f...
Thomas Schleich is an engineer, an expounder of ideas, a free spirit – and a first-class speaker at the dataTec Academy....