Gossen Metrawatt M700D | Metratester 5+ device tester test device VDE0701-0702
Manufacturer number: M700D
Gossen Metrawatt M700D | METRATESTER5 + test device VDE0701-0702 with residual current measurement.
- Insulation resistance 0 ... 19.99 MOhm
- Differential current 0.01 .. 19.99 mA
- Protective conductor resistance 0 ... 19.99 ohms
- Replacement leakage current 0 ... 19.99 mA
- De-energized 0 ... 1.999 mA
- Mains voltage 207 V ... 253 V
- Consumer current 0 ... 16.00 A
- Dimensions WxHxD 190 x 140 x 95 mm
- Weight about 1.3 kg
Technical Data
Article number: | M700D |
---|---|
Automatic test sequence: | No |
DIN VDE0544-4 / IEC 60974-4: | No |
DIN VDE 0701-0702: | Yes |
DIN VDE 0751 / IEC62353: | No |
Differential power: | 0,01 - 19,99 mA |
Dimensions (L x W x H) (mm): | 190 x 140 x 95 |
EN 50678 (prepared): | No |
EN 50699 (prepared): | No |
Earth conductor 10A: | No |
Earth conductor 25A: | No |
High voltage test DC: | No |
Interfaces: | No |
Isolation: | 0,05 - 19,99 MΩ |
Measured value memory: | No |
Mobile: | Yes |
Model: | GMC Metratester 5+ |
Protective earth less than 200mA: | Yes |
Software included: | No |
Stationary: | No |
Touch Display: | No |
Weight (kg): | 1.3 |
Documents & Downloads
Description
M700D | Metratester 5+ device tester test device VDE0701-0702
Test device for DIN VDE 0701-0702 METRATESTER 5 Plus (M700D): Device for testing the electrical safety of electrical equipment in accordance with DIN VDE 0701-0702. Large digital LCD display, check of the mains connection by finger contact and signal lamp.
Display functions: All measured values are displayed on a large digital display so that they are easy to read. In addition, limit violations are signaled optically and partly acoustically.
Ideal for training and service / service technicians
Lieferumfang
- Tester including power cord with safety plug and a permanently attached probe cable with test tip and a clip-on alligator clip
- 1 cable set KS17-4 for insulation and touch current measurement
- 1 instruction manual
- 1 factory calibration certificate
News and Knowledge
The DIN VDE regulations govern the electrotechnical regulations as defined by DGUV V3 (accident prevention regulations f...
Thomas Schleich is an engineer, an expounder of ideas, a free spirit – and a first-class speaker at the dataTec Academy....