Gossen Metrawatt M693C | Seculife ST HV Secutest S3 + test device VDE medicine MPG, 200mA / 25A test current
Manufacturer number: M693C
Gossen-Metrawatt M693C | Seculife ST HV Secutest S3 + test device VDE medicine MPG, 200mA / 25A test current.
- Protective conductor resistance measurement with 200 mA and 25 A test current
- Insulation resistance measurement
- Earth leakage current measurement
- Touch current measurement (case leakage current)
- Patient leakage current measurement AC and DC
- Auxiliary patient current measurement
- Substitute leakage current method
- Direct measurement method
- Residual current measuring method
- Connection possibility for application parts 4 mm via socket 10 + 2 (option PA4)
- Internal memory for 125 tests
- RS232 connection
- DA-II printer adapter (optional)
- Power supply: mains connection 110 V / 60 Hz, 230 V / 50 Hz
- Options: Printer / memory interface (PSI module)
- Software: The SECULIFE ST is compatible with PS3, visualFM, Fundamed, MD Data and others
- Multiple display by backlit
Dot matrix 128 x 128 dots - Weight approx.5.9 kg
- Dimensions: W 292 mm x H 300 mm x D 138 mm
Technical Data
Article number: | M693C |
---|---|
Automatic test sequence: | Yes |
DIN VDE0544-4 / IEC 60974-4: | No |
DIN VDE 0701-0702: | Yes |
DIN VDE 0751 / IEC62353: | Yes |
Differential power: | 0,2 - 31,0 mA |
Dimensions (L x W x H) (mm): | 292 x 138 x 300 |
EN 50678 (prepared): | No |
EN 50699 (prepared): | No |
Earth conductor 10A: | Yes |
Earth conductor 25A: | Yes |
High voltage test DC: | 6000VDC |
Interfaces: | RS-232 |
Isolation: | 0 - 310 MΩ |
Measured value memory: | 125 |
Mobile: | Yes |
Model: | Seculife ST HV Secutest S3+ |
Protective earth less than 200mA: | Yes |
Software included: | ETC |
Stationary: | No |
Touch Display: | No |
Weight (kg): | 5.9 |
Documents & Downloads
Description
M693C | Seculife ST HV Secutest S3 + test device VDE medicine MPG, 200mA / 25A test current
Multifunctional testing device for medical devices. As a multifunctional test device, the SECULIFE ST is ideally suited for carrying out and documenting measurements on medical devices. It enables precise testing of mobile medical devices. As a manufacturer, you can test your devices according to the applicable standard.
As the only measuring device on the market, the SECULIFE ST is designed to also test three-phase devices in the medical field. The three-phase adapters AT3-IIIE and AT3-IIS serve as optional accessories.
Checking electrical safety:
- Electromedical devices according to DIN VDE 0751 / IEC 62353 and EN 60601 2nd and 3rd edition
- Electrical equipment according to DIN VDE 0701-0702
Routine tests according to EN 61010, EN 60950, EN 60335
Lieferumfang
- Seculife ST HV tester
- Probe cable with test tip
- clip-on alligator clip for test probes
- attachable quick release clamps
- Patient connection lines 2 mm
- Alligator clips 2 mm
- Calibration certificate according to DKD
- operation manual
- Shoulder strap
Accessoires (14 products )
Alternate products (10 products )
Recommendations (18 products )
News and Knowledge
The DIN VDE regulations govern the electrotechnical regulations as defined by DGUV V3 (accident prevention regulations f...
Thomas Schleich is an engineer, an expounder of ideas, a free spirit – and a first-class speaker at the dataTec Academy....