#statusMessage#

Do you want to start the compare now?

FLUKE I310S | Current clamp, BNC, 300 A DC - 20 kHz

Manufacturer number: I310S

Fluke current probe i310s, 300A

  • Current measuring ranges: 30 A and 300 A AC effective or ± 45 A and 450 A DC
  • ACeffective or DC: ± 45 A and 450 A
  • Inrush current: MAX 600 A ACeffective
  • Output sensitivity: 10 mV / A (30 A) / 1 mV / A (300 A)
  • Accuracy: ± 1% of the measured value ± 50 mA (300 A range) ± 1% of the measured value ± 300 mA
  • Bandwidth to meet 1 kHz accuracy specifications
  • Resolution: ± 50 mA (30 A), ± 100 mA (300 A)
  • Load impedance:> 10 kΩ and ≤100 pF
  • Frequency range (small signal): DC to 20 kHz (-3 dB)
  • Power supply: 9 V battery (alkaline), MN1604 / PP3
  • Battery life: 30 hours, display when battery voltage is low
  • Maximum conductor diameter: 19 mm diameter
  • Output connector: BNC safety connector, 4mm safety adapter included
  • Zero point output: Manual setting via knurled wheel
  • Cable length: 2 m
  • Weight: 250 g
  • Safety: 300 Veffective, category III, pollution degree 2
  • Note: Use of the sensor on non-insulated conductors is limited to 300 V AC effective or DC and frequencies below 1 kHz.

Description

I310S | Current clamp, BNC, 300 A DC - 20 kHz

The Fluke i310s current clamp uses Hall effect technology to measure direct and alternating currents. The Fluke i310 s can be used in conjunction with oscilloscopes and other suitable recording devices for exact current measurements without interrupting the circuit.

Lieferumfang

contain
  • Zero point output: Manual setting via knurled wheel
  • Cable length: 2 m
  • Weight: 250 g
  • Safety: 300 Veffective, category III, pollution degree 2
  • Note: Use of the sensor on non-insulated conductors is limited to 300 V AC effective or DC and frequencies below 1 kHz.
  • News and Knowledge

    slide 1 of 1

    About the Manufacturer

    FLUKE
    Since its founding in 1948, Fluke has provided professional tools and measurement equipment for the installation, maintenance and service of electronic equipment in industry, power, medical, building services and electrical installations, as well as in precision measurement and quality assurance.

    Last Seen Products