Chroma 6312A | Electronic load mainframe 2-slot for 631xxA load modules, max. 1,200W, RS-232
Manufacturer number: 6312A
Chroma 6312A | Mainframe for electronic loads, housing for 2 load modules, RS-232.
- Maximum power: 200W, 100W × 2 (Dual), 30W & 250W, 300W, 350W, 600W, 1200W
- Output voltage: 0 to 500 V.
- Compatibility between 6310 and 6310A
- 2 channels in a mainframe for testing multiple SMPS outputs
- Parallel load modules up to 1200 W for high current and high performance applications
- Can be connected in parallel in master-slave mode
- Multiple load synchronization
- Constant voltage (CV), current (CC), resistance (CR), power (CP)
- Dynamic loads with frequencies up to 20 kHz
- Fast load simulation from 0.32 mA / µs to 10 A / µs z. B. for the automotive and semiconductor industries
- Minimal input resistance allows load conditions at high currents and low load voltages
- Real-time transients enable simulation of a power supply load and associated measurement of the output values
- User-specific programming over 100 sequences; Status can be read on the device display
- Test for limit values (mask) for go / no-go selection
- Digital inputs / outputs for automatic control / program control
- Overcurrent protection (OCP) test function
- 16-bit resolution of the current and voltage measurements with 2 areas
- Possibility of remote scanning
- Short circuit test
- Self-test when switching on
- Complete protection: OC, OP, OT, OV protection and reverse polarity alarm
- Interface: RS232C
- Optional interfaces: USB, GPIB
- Dimensions: Height: 194 mm x width: 275 mm x depth: 550mm
- Empty weight: 15 kg
- 2 year guarantee
Technical Data
DC output reversible: | DC sink |
---|
Documents & Downloads
Description
6312A | Electronic load mainframe 2-slot for 631xxA load modules, max. 1,200W, RS-232
Chromas 6310A series is suitable for testing and evaluating power supplies, DC / DC converters, chargers and electronic components. For use in research and development, production and incoming goods inspection. The system is configured by installing load modules in the base frame. The loads have interfaces such as RS232, USB or GPIB.
The 6310A series offer 8 modules with powers between 100 and 1,200 W, nominal current values between 0.5 mA and 240 A and nominal voltage values between 0.5 mV and 500 V. The loads can be in CC-, CV-, CP- and CR- Mode operated and connected in parallel for current and power increase.
News and Knowledge
With the increasing importance of renewable energies in the wake of climate change, solar energy is moving further into ...
Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...