Chroma 61800-100 | 4-quadrant AC source, regenerative grid simulator / grid simulation, 105 kVA, 0 ... 300 V, 30 Hz ... 100 Hz
Manufacturer number: 61800-100
On Request
Chroma 61800-100 | 4-quadrant AC source, regenerative grid simulator / grid simulation, 105 kVA, 0 ... 300 V, 30 Hz ... 100 Hz.
- Nominal output power: 105 kVA
- Output voltage: 0 - 300 V (optionally expandable)
- Output frequency: DC, 30 Hz - 100 Hz
- User selectable single phase or three phase output
- Full 4-quadrant, fully regenerative up to 100% of the output current carrying capacity
- Specially developed for PV inverters, intelligent power grids and electric vehicle related test applications
- Programmable current rise rate setting for voltage and frequency
- Programmable voltage and current limits
- Phase control when switching on / off
- LISTEN, IMPULS, STAGE mode functions for testing the simulation of line faults (PLD)
- Simulation of voltage dips, short interruptions and voltage changes
- Waveform synthesizer for harmonics, intermediate vibrations
- Comprehensive measurement capability, including current harmonics
- Programmable analog interfaces
- Remote interface: GPIB, RS-232, USB and Ethernet
- Parallel output for high performance applications (only three phases)
- Optional: regenerative AC load function
- Optional: 120 kVA 800 VLN XHV function
Technical Data
AC input: | 3P |
---|---|
AC output: | 1P / 3P |
Article number: | 61800-100 |
DC output reversible: | AC bidirectional (2Q/4Q) |
Dimensions (L x W x H) (mm): | 1000 x 780 x 1740 |
Frequency range: | 30 Hz - 100 Hz |
Grid simulation: | Yes |
Interfaces: | USB, LAN, GPIB, RS-232 |
Mains feedback: | Yes |
Model: | 61800-100 |
Output power (kW): | 105 |
PLD Testfunction: | Yes |
Power factor: | 0,95 |
Protective devices: | OVP, OCP, OPP, OTP, FAN |
Weight (kg): | 1120 |
max. Power (A): | 420 |
max. Voltage (V): | 300 |
Documents & Downloads
Description
61800-100 | 4-quadrant AC source, regenerative grid simulator / grid simulation, 105 kVA, 0 ... 300 V, 30 Hz ... 100 Hz
The Chroma 61800-100 is a fully regenerative full 4-quadrant AC source with advanced network simulation features for compliance, security and product verification testing. With the regenerative grid simulator (grid simulator) you meet test standards for distributed resource (DR) products such as PV inverters or wind energy systems (IEEE 1547 / IEC 61000-3-15 / IEC 62116) as well as for general household appliances. The network simulator 61800-100 can also meet test requirements with intelligent network tests and test applications related to electric vehicles, e.g. B. Testing of V2G (vehicle feed) and ESS (energy storage system).
The DUT can seamlessly be a power consumer and power source to support different types of applications. In cases where the DUT serves as a power source, the excess power is determined by a detection circuit and fed back into the power grid.
The 61800-100 regenerative network simulator is not limited to product development during R&D. Its extensive functions are useful for design and quality verification, even across different manufacturing stages. With state-of-the-art digital control technology, the 61800-100 delivers AC up to 300 V at output frequencies between 30 Hz and 100 Hz.
Accessoires (2 products )
Alternate products (4 products )
Options (1 product )
News and Knowledge
With the increasing importance of renewable energies in the wake of climate change, solar energy is moving further into ...
Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...