Chroma 61503 | AC source, 1.5 kVA, 300 V, 15 to 1 kHz, integr. PLD simulation, network simulator
Manufacturer number: 61503
Chroma 61503 | Programmable AC source 1,500 VA, 0-300 V, 15-1000 Hz, 1-phase with DC output for grid disturbance simulation.
- AC output: 1,500 VA, 0 - 150 V / 0 - 300 V, 12 A / 6 A, 15-1000 Hz, 1-phase
- DC output: 750 W, 212 V / 424 V, 6 A / 3 A
- Compact size and weight due to advanced PWM technology
- AC + DC output mode for simulation of a DC offset
- Programmable output impedance for IEC 61000-3-3
- IEC 61000-4-11-, IEC 61000-4-14-, IEC 61000-4-28 simulation of voltage dips and frequency variations
- Harmonics, intermediate vibration waveform synthesizer for IEC 61000-4-13 testing
- Ability to simulate line disturbances
- Programmable limit settings for voltage and current
- Comprehensive measurement capability, including current harmonics
- High output current crest factor, ideal for testing the inrush current
- Phase control when switching on and off
- TTL signal that shows the steady state of the output values after a change
- Programmable analog interface as an option
- 2 units combined in series for high voltage source (model 61501 - 61505)
- 3 units combined for 3-phase output power (model 61501 - 61505)
- Optional GPIB and RS-232 interface (model 61501 - 61505)
- Optional USB and LAN interface
- Easy-to-use graphical user interface: soft panel (option)
- Convenient PC software soft panel (GUI) for easy control and regulation included
- Can achieve an output power of up to 90 kVA by implementing a master-slave parallel operation
- Dimensions: Width: 482.6 mm x height: 133.35 mm x depth: 569.5 mm
- Weight: 20 kg
- 2 year guarantee
Technical Data
AC input: | 1P |
---|---|
AC output: | 1P |
Article number: | 61503 |
DC output reversible: | AC Source |
Dimensions (L x W x H) (mm): | 569,5 x 482,6 x 133,35 |
Frequency range: | 15 Hz - 1 kHz |
Grid simulation: | No |
Interfaces: | Optional: USB and LAN or RS-232 and GPIB |
Mains feedback: | No |
Measurement functions: | True RMS, Current, True Power, VA, VAR, Power Factor, Current Crest Factor, Peak Repetitive Current, Inrush Current |
Model: | 61503 |
Output power (kW): | 1.5 |
PLD Testfunction: | Yes |
Power factor: | 0,98 |
Protective devices: | UVP, OCP, OPP, OTP, FAN |
Weight (kg): | 20 |
max. Power (A): | 12 |
max. Voltage (V): | 300 |
Documents & Downloads
Description
61503 | AC source, 1.5 kVA, 300 V, 15 to 1 kHz, integr. PLD simulation, network simulator
The 61500 series AC sources set a new standard for AC sources. It is equipped with all powerful functions, such as. B. Simulation of line disturbances, programmable output impedance, comprehensive measurement functions, wave-shaped synthesis and software for regulatory tests. With this range of functions, the series is ideally suited for commercial applications in the fields of power electronics and mass production. From 500 to 4,000 VA with a phase output, the 61500 series gives users maximum choice for R&D design verification, quality assurance through to production testing. With its state-of-the-art PWM technology, the 61500 series is able to deliver a 6 times higher peak current in the Compared to their maximum nominal current, which makes them ideal for input current tests.
Lieferumfang
Accessoires (6 products )
Alternate products (17 products )
Recommendations (5 products )
News and Knowledge
With the increasing importance of renewable energies in the wake of climate change, solar energy is moving further into ...
Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...