The Beha Amprobe GT-900 appliance tester enables you to carry out tests in accordance with DIN VDE 0701-0702 and DGUV regulation 3 (BGV A3). The VDE test device has a database in the test device (bi-directional) as well as automatic and pre-installed test sequences.
The operation of the GT 900 is simple and uncomplicated, using a rotary switch and START / STOP button. The automatic start and save function for protective conductor resistance test allows you to measure objects that are difficult to access with both hands.
The integrated measured value memory is sufficient for approx. 5,000 device measurements / test items and has three storage levels (customer, location, department). The GT-900 appliance tester has USB connections and is HID compatible.
Measurement functions:
- Visual inspection
- Protective conductor resistance measurement (RPE)
- Insulation resistance measurement (RISO)
- Substitute leakage current measurement (IEA)
- Protective conductor current measurement (IPE Δ)
- Contact current measurement (IB)
- Functional test (P / IL) Apparent power (VA), effective power (P), line voltage at the test item (U), current consumption (load current) (IL), power factor (cos φ)
- Current measurement via external
- Direct testing of cold / warm device lines
- Testing of extension cables, multiple sockets and cable reels
- Automatic testing of portable residual current circuit breakers
- Measurement of safety extra-low voltage (SELV / PELV)
- Automatic test sequence (AUTO TEST)
Product features:
- Simple operation via rotary switch and START / STOP button
- Database in the test device, test information (attributes) available for each test item
- Test current for protective conductor resistance 5 A and 0.2 A (AC)
- Differential current measurement method for protective conductor current
- Direct measurement method for contact current
- Fast safety and functional testing of IEC cables
- Suitable for technically trained persons, clear good / bad information function
- Connection for barcode scanner for reading in test item numbers
- Automatic test sequence (AUTO TEST), also with input of customer-specific test sequences. The customer-specific test sequences can be saved on a USB stick and copied from test device to test device.
- Connection for external current clamp adapter for measuring protective conductor currents and load currents also on 3-phase test objects.
- Testing of portable residual current circuit breakers (PRCD, PRCD-S, PRCD-S +, PRCD-K). Upstream RCD / Fi are not triggered during this test.
- Test voltage for insulation measurement switchable 250/500 V
- Automatic polarity reversal of the mains socket