Programmable AC Power Sources
The GENESYS™ AC series.
The programmable GENESYS™ AC power sources, also known as GAC, redefine testing in terms of functionality, reliability and ease of use. In addition to very high power density, the models offer a high-quality, technically advanced solution and easy access to the many parameters and measurements required in AC test scenarios.
Modern AC power sources for reliable tests.
The programmable AC power sources of the GENESYS™ AC series have a very high power density up to 3 kVA in only 1U, voltages of 0-350 Vac or 0-350 Vac and ±500 Vdc, currents from 0 to 30 Arms and frequency range from 16 Hz up to 5 kHz.
In addition to the multilingual touch panel display with full-color LCD for easy operation, all models have integrated LAN, USB, RS-232/RS-485 and isolated analog interfaces (IEEE488/GPIB optional) and ≤8 kg weight, are significantly lighter than other AC sources with similar performance features.
Features & Highlights
- 2 and 3 kVA output power; highest power density in 1U
-
Single-phase (85-265 Vac) and three-phase (170-265 / 342-528 Vac) input power
-
Sine, square and triangle waveforms
-
Full color capacitive touch panel
- Remote GUI interface included
- 5 year warranty
- Available in gray or black, with or without display (blank for ATE)
One GUI for all - standardized for AC/DC.
The included remote GUI software gives the user full control, sequence programming and the option to use pre-programmed test standards for common IEC, aerospace and marine tests. These standards will significantly improve accuracy while reducing test time and cost compared to traditional manual settings.
A unified user interface for AC power sources and programmable DC power supplies ensures optimal ease of use. In addition to the supplied GUI interface, they can be controlled with standard laboratory and test software via SCPI commands.
Multiphase configuration for higher performance.
GENESYS™ AC in your application.
With the AC sources of the GENESYS™ AC series, you can precisely simulate a wide range of grid conditions. From voltage drops to harmonic distortion, you have full control. Thanks to GENESYS™ AC's cutting-edge technology, you can create exact test conditions that are reproducible with every test run. This is crucial in research and development, where consistent data is essential throughout the testing process.
Whether you are testing solar modules, inverters or complete solar systems, GENESYS™ AC provides the flexibility to meet different testing requirements. You can program the source to accurately replicate the desired conditions. Furthermore, the GENESYS™ AC is ideal for automated test equipment, avionics, aircraft electrical power supply, defense industry (RTCA, Boeing, Airbus standards), automotive, e-mobility and power source testing.
Model GAC
- AC output frequency 16 to 1,200 Hz
- Operating mode
AC
- AC output range 350 Vac with 20 or 30 A
- Arbitrary waveform generator and harmonic analysis (optional)
- IEC 60601, IEC 61000-4-11/-13 and reporting in the GUI (optional)
Model GAC-PRO
- Operating mode AC-DC, AC+DC
- AC output range 350 Vac with 20 or 30 A and DC ±500 Vdc; Full rated power available in DC mode with 20 or 30 A
- Arbitrary waveform generator and harmonic analysis as standard
- IEC 60601, IEC 61000-4-11/-13 and reporting in the GUI (optional)
- Avionics (Airbus, Boeing, RTCA/DO) and/or MIL-STD (including marine) standard signals (optional)
Optional Test standards
GAC-PRO - D
Product inquiry and request.
Do you have any questions or would you like a configuration? Our experts will configure the device for you so that it suits you and your measuring task. We look forward to hearing from you.
