SPS KT1885L | Test device VDE manufacturer standard, 19 inch, 5U, HV AC / DC 5.5 / 6.0 kV 50/100 mA, ISO 6kV
Manufacturer number: KT1885L
PLC KT1885L | Test device VDE manufacturer standard, 19 inch, 5 U, HV AC / DC 5.5 / 6.0 kV 50/100 mA, ISO 6kV
- Operation with capacitive 10.1 inch touch display
- Supported by mouse and keyboard
- 19 inch system device
- Possibility of integrating a barcode scanner with a basic filter
- Results display
- NET function
- Save and load test programs and test results
- Graphical representation of the individual tests
- Customer-specific adaptation of the test and measured values, for example in high-voltage testing: fault triggering via current or voltage
- Intuitive menu navigation and ease of use
- Possibility to connect a USB printer
Performance data:
- High voltage AC: voltage range 100 - 5,500 V
- High voltage AC: current range 0 - 100 mA
- High voltage DC: voltage range 100 - 6,000 V.
- High voltage DC: current range 0 - 100 mA
- Isolation DC: voltage range 100 - 6,000 V
- Isolation DC: measuring range 250 kΩ - 1 GΩ
- ARC detection (optional) 0 - 100%
- Protective conductor: test current 1 - 30 A
- Protective conductor: measuring range 0 - 10 Ω
- Substitute leakage current 50 - 270 V / 0 - 10 mA
- Continuity 24 V DC / 0 - 600 mA
- Resistor 24 V DC / 0 - 1,000 Ω
Documents & Downloads
Description
KT1885L | Test device VDE manufacturer standard, 19 inch, 5U, HV AC / DC 5.5 / 6.0 kV 50/100 mA, ISO 6kV
Regardless of whether direct or alternating voltage, the KT 1885L measures voltage, current and insulation - and all this with automatic range selection. Incidentally, the KT 1885L has almost unlimited storage space for uncomplicated documentation of test results and individual test programs.
The KT 1885L was developed as a 19 '' plug-in device, but can also be used as a table device with the separately available housing. Operation is possible directly via the network or via an additional PC.
Note: The KT 1885L device generates life-threatening voltages and currents. It is therefore the responsibility of the user (OEM) to meet the safety requirements according to EN 50191. The device must not be operated without suitable protective measures!