Pico TA519 | PicoVNA 108 E-Cal 8.5 GHz Kit automated calibration (SMA female)

Manufacturer number: TA519

Pico TA519 | E-Cal Kit for the automated calibration of the PicoVNA 108 (PQ112) up to 8.5 GHz, SOLT-AUTO-F, USB-controlled E-Cal module SOLT, 2 ports, 50 Ω, SMA(f) for full S-parameter 300kHz to 8.5GHz.

  • Ports and Impedance: 2 x 50Ω SMA(m) ports
  • Connector input limits: +10 dBm operating, +20 dBm/1 V pk protection
  • Bandwidth: 300kHz to 8.5GHz
  • Directivity: 40dB
  • Source match: 40dB
  • Load match: 36dB
  • Reflection tracking: 0.05dB
  • Transmission tracking: 0.04dB
  • Transmission method: SOLT comparison (characterization data recording in internal memory)
  • Control and power supply: USB 2.0 (micro)
  • Dimensions: 65mm L x 43mm W x 15mm H (including connectors)
  • Weight: 60g
  • Temperature (operating): 5°C to 40°C
  • Temperature (control range of the oven): +18 °C to 28 °C To maintain the specified accuracy
  • Oven warm-up time: 45 s typical at 23 °C
  • Operating Humidity: 5% to 80% RH non-condensing
  • Temperature (storage): -20°C to 50°C
  • Storage Humidity: 5% to 80% RH non-condensing

Manufacturer-independent

Wide variety of brands from dataTec.

To the brands

Large product portfolio

All the highlights of dataTec Switzerland at a glance.

Download here

Demonstration & Consulting

Sales and technical support close to you.

Start request

Documents & Downloads

Description

TA519 | PicoVNA 108 E-Cal 8.5 GHz Kit automated calibration (SMA female)

Do you need male and female slots? For this, Pico offers a Dual E-Cal Kit:
TA520 | PicoVNA 108 Dual E-Cal 8.5 GHz Kit automated calibration (SMA male / female)

A manual calibration process involves multiple docking and undocking operations for the standards and manually loading individual characterization files for each standard. The E-Cal SOLT calibration process reduces this to a single port by internally switching its calibration standards. The process is controlled automatically and highly repeatably, with power, control and data readout managed by PicoVNA software via a USB interface.

Fast, convenient, and less error-prone, a simple E-Cal standard is somewhat vulnerable to switching inaccuracies that result in non-ideal shorts, opens, stresses, and continuity. PicoVNA's E-Cal standards incorporate rapid temperature compensation through furnace control and multipath S-parameters over the full frequency range covered, which traceably characterize these now stable and minor imperfections. Yet the convenience, reduced labor and speed of automated calibration can lead to more regular calibration and therefore more accurate, repeatable and reliable measurements - which may prompt some process managers to insist on an automated E-Cal.

All PicoVNA calibration and verification standards are calibrated against fully traceable national standards and are supplied in a protective sleeve.

Standards: Short, Open, Load, Through and separately characterized port adapters

Accessoires (1 product)

VNA 108
Pico
VNA 108
USB vector network analyzer, 300 kHz to 8.5 GHz, Quad RX (PQ112)
Delivery time upon request
CHF 8,940.00

Alternate products (2 products)

TA518
Pico
TA518
PicoVNA 108 E-Cal 8.5 GHz Kit Automated Calibration (SMA male)
Delivery time upon request
CHF 1,675.00
TA520
Pico
TA520
PicoVNA 108 Dual E-Cal 8.5 GHz Kit automated calibration (SMA male / female)
Delivery time upon request
CHF 3,184.00

About the Manufacturer

Pico
Pico Technology, the leader in USB oscilloscope technology, offers innovative, high-quality and affordable alternatives to traditional benchtop meters. The wide range of PC-based digital oscilloscopes offers a full range of functions. The Pico data loggers are ideal for measuring and storing temperature, humidity, current and voltage.

Last Seen Products

Product added to compare
Product Compare added Product Compare