Network Analyzers
Network analyzer for measuring the reflection and transmission of electron. DUTs as a function of frequency. Bench, PXI and handheld models.
66 products
Rohde&Schwarz ZNL3-B32
On Request
Receiver attenuator Tor2, electrical, 30 dB in 10 dB steps, for ZNL3 (1323.1854.02)
Delivery time upon request
Rohde&Schwarz ZNL6-COM
CHF 37,745.00
Bundle ZNL6 vector network analyzer 5 kHz - 6 GHz including options (1323.0012P08)
Delivery time upon request
Rohde&Schwarz ZNL6-B31
On Request
Receiver attenuator Tor1, electronic, 30 dB in 10 dB steps, for ZNL6 (1323.2038.02)
Delivery time upon request
Rohde&Schwarz ZNL3-B31
On Request
Receiver attenuator Tor1, electronic, 30 dB in 10 dB steps, for ZNL3 (1323.1848.02)
Delivery time upon request
Rohde&Schwarz ZNL4-B31
On Request
Receiver attenuator Tor1, electronic 30dB in 10dB steps, for ZNL4 (1303.8124.02)
Delivery time upon request
Rohde&Schwarz ZNZ154-B42
On Request
Additional gates 19 to 24 ZN-Z154, ZNZ154-B22 and 0 required) (Hardware option, factory installation or service) (1319.5136.42)
Delivery time upon request
Rohde&Schwarz ZN-Z129
On Request
Calibration kit, 50 Ohm, 2.92mm (male), 0 Hz to 40 GHz, DAkkS calibration, open, short, match, combination (1328.8140.22)
Delivery time upon request
Pico TA346
CHF 781.00
Calibration kit, precision, 3.5 mm (m), 50 ohms, 6 GHz for Pico VNA106 (PQ111)
Delivery time upon request
Pico TA520
CHF 3,184.00
PicoVNA 108 Dual E-Cal 8.5 GHz Kit automated calibration (SMA male / female)
Delivery time upon request
Rohde&Schwarz ZNZ154-B22
On Request
Additional gates 7 to 12 (ZN-Z154 required) (hardware option, factory or service installation) (1319.5136.22)
Delivery time upon request
Rohde&Schwarz ZNLE14
On Request
Network analyzer, vectorial, 2 port, 1 MHz - 14 GHz, connector: type N (f) (1323.0012.64)
Delivery time upon request
Pico TA519
CHF 1,675.00
PicoVNA 108 E-Cal 8.5 GHz Kit automated calibration (SMA female)
Delivery time upon request
Rohde&Schwarz ZN-Z135
On Request
Calibration kit, 50 Ohm, 3.5mm (male), 0 Hz to 45438 GHz, Open, Short, Match, Through combination (1328.8157.12)
Delivery time upon request
Rohde&Schwarz ZNLE-B100
On Request
Extension of the lower frequency limit to 100 kHz (1303.9272.02)
Delivery time upon request
Rohde&Schwarz ZNLE4
On Request
Network analyzer, vectorial, 2 port, 1 MHz - 4.5 GHz, connector: type N (f) (1323.0012.54)
Delivery time upon request
Pico TA344
CHF 470.00
Calibration kit, standard, SMA (m), 50 Ohm, 6 GHz for Pico VNA106 (PQ111)
Delivery time upon request
Rohde&Schwarz ZNL-K2
On Request
Time domain analysis, for ZNL retrofit (1323.1819.03)
Delivery time upon request
Rohde&Schwarz ZNL20-B32
On Request
Receiver attenuator Tor2, electronic 30dB in 10dB steps, for ZNL20 (1303.9108.02)
Delivery time upon request
Rohde&Schwarz ZN-Z129E
On Request
Calibration kit, 50 Ohm, 2.92mm (female), 0 Hz to 43.5 GHz, Open, Short, Match, Through combination (1328.8170.13)
Delivery time upon request
Rohde&Schwarz ZN-Z129E
On Request
Calibration kit, 50 Ohm, 2.92mm (male), 0 Hz to 43.5 GHz, DAkkS calibration, open, short, match, combination (1328.8170.22)
Delivery time upon request
Rohde&Schwarz ZNL20-B22
On Request
Extended level range down to -40dBm for ZNL20 (1303.9089.02)
Delivery time upon request
Rohde&Schwarz ZN-Z129E
On Request
Calibration kit, 50 Ohm, 2.92mm (male), 0 Hz to 43.5 GHz, Open, Short, Match, Through combination (1328.8170.12)
Delivery time upon request
Rohde&Schwarz ZNL-B19
On Request
Removable hard drive, for ZNL, pre-mounted on PC card, including analyzer firmware (1323.2938.02)
Delivery time upon request
Pico TA345
CHF 470.00
Calibration kit, standard, SMA (f), 50 Ohm, 6 GHz for Pico VNA106 (PQ111)
Delivery time upon request