GW Instek PPX-2005 | Power supply unit, DC, 1 channel, linear 20 V / 5 A, 100 W, USB, LAN, analog
Manufacturer number: PPX-2005
GW Instek PPX-2005 | Power supply unit, DC, 1 channel, linear 20 V / 5 A, 100 W, USB, LAN, analog.
Technical Data
AC input: | 100 V / 120 V / 220 V / 230 V |
---|---|
Additional functions: | Datenloggerfunktion, Temparaturmessung mit Typ-K Memoryfunktion |
Article number: | PPX-2005 |
Autorange: | No |
Bidirectional: | No |
DC output reversible: | DC Source |
Dimensions (L x W x H) (mm): | 313 x 107 x 124 |
Interfaces: | USB, LAN, RS-232, RS-485 Optional: GPIB |
Model: | PPX-2005 |
Number of outputs: | 1 |
Output power (kW): | 0.1 |
Protective devices: | OVP, OTP, OCP |
Warranty (years): | 2 |
Weight (kg): | 5.5 |
max. Power (A): | 5 |
max. Voltage (V): | 20 |
Documents & Downloads
Description
PPX-2005 | Power supply unit, DC, 1 channel, linear 20 V / 5 A, 100 W, USB, LAN, analog
Please Note: This device is currently delivered without GPIB interface.
The programmable, high-precision DC power supply units of the GW Instek PPX series comprise six models. In addition to the PPX-2005 variant with 20 V / 5 A / 100 W presented here , the power supply units are also available in the PPX-1005 (10 V / 5 A / 50 W), PPX-2002 (20 V / 2 A / 40 W), PPX-3601 (36 V / 1 A / 36 W), PPX-3603 (36 V / 3 A / 108 W), and PPX-10H01 (100 V / 1 A / 100 W).
The supported standard communication interfaces include USB, LAN, RS-232, RS-485 and the optional GPIB interface (GP models: PPX-1005GP, PPX-10H01GP, PPX-2002GP, PPX-2005GP, PPX-3601GP, PPX -3603GP).
The PPX series is characterized by low output noise (0.35mVeff) and fast transient response (<50μs) , comparable to conventional linear power supplies. It also offers output modes with constant voltage and constant current priority. The rise / fall rates of voltage and current as well as the delay time for switching the output on and off can be set separately.
The power supply units have four current and two voltage levels and thus enable high-precision measurements.
You can use the data logger function to save the measurement protocols for long-term measurement and recording of IoT devices, portable devices, wearables and sensor components.
In order to meet the requirements for the power supply of portable devices and wearables , the PPX series has current resolutions of 0.1 μA, 1 μA, 10 μA, 0.1 mA and voltage resolutions of 0.1 mV and 1 mV . Even in idle / standby mode, the PPX series continues to measure even the smallest current changes in the DUT.
The PPX series offers the function »test sequence« , with which you can define any output signal shape. The voltage rise or fall time and the voltage hold time of each step can be set. The parameters can be edited both directly via the front panel and via a remote connection. In addition, the OCP delay function allows you to flexibly set the time for activating the overcurrent protection according to the properties of the device under test. In this way you protect the device under test and at the same time check the current change of the DUT within a certain period of time.
In addition to voltage, current and power measurement, the PPX series also supports temperature measurement . In connection with a type K thermocouple, the temperature range from -200 ° C to + 1,372 ° C can be measured.
Accessoires (6 products )
Alternate products (5 products )
Options (6 products )
News and Knowledge
Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...
About the Manufacturer
Good Will has been listed on the Taiwan Stock Exchange since 2000. Development and production focus on high quality and low cost measuring instruments for production, laboratory and education. Headquartered in Taipei, Good Will has subsidiaries in China, America, Japan, Korea and Malaysia. The products are sold in over 80 countries.