GW Instek MDO-2104EG | Oscilloscope, 4 channel, spectrum analyzer, 100 MHz, 1 GSa / s, 10 MPts, USB, LAN, working gen.
Manufacturer number: MDO-2104EG
GW Instek MDO2104EG | 4-channel multi-function and mixed-domain oscilloscope with a bandwidth of 100 MHz, with integrated spectrum analyzer DC - 500 MHz and a 2-channel arbitrary generator 25 Mhz.
- Bandwidth: 100 MHz
- 4 channels
- Maximum real time sampling rate: 1 GSa / s
- Memory depth 10 MPoints per channel
- Segmented memory: can be divided into 29,000 areas
- VPO (Visual Persistence Oscilloscope) Waveform Display Technology for more signal information similar like with analog oscilloscopes
- Signal acquisition rate up to 120,000 wfs / s
- 38 automated measurements
- Built-in spectrum analyzer with 0 to 500 MHz bandwidth
- FFT function: A maximum of 1M FFT produces higher measurement resolution in the frequency domain
- High pass, low pass and band pass filter functions
- Decoding and trigger function for serial buses like: I²C / SPI / UART / CAN / LIN
- Mask test
- Frequency Response Analyzer FRA (Bode Plot) application (from firmware V1.34 or later)
- Data logger function can record signal changes up to 1,000 hours
- Built-in AWG arbitrary generator : Two-channel, 25 MHz, 200 MSa / s, 14 bit, memory depth 16 k points
- Standard waveforms: sine (25 MHz), rectangle (15 MHz), pulse, ramp (1 MHz), DC, noise, Lorentz, exponential rising edge, exponential falling edge, Haversine and cardiogram function
- Display: approx. 20 cm screen diagonal (8 inch) WVGA TFT LCD display
- Network storage function
- Interfaces: High Speed USB, Host Port, Lan, Go / NoGo-BNC
- Dimensions: W 384 x H 208 x D 127.3 mm
- Weight: approx. 3 kg
- Warranty: 3 years
- Power cord, calibration certificate, CD-ROM (with brief instructions, operating instructions, programming manual
- One passive probe per channel
- GTL-110 BNC to BNC cable
Technical Data
Article number: | 01MD214EG0GT |
---|---|
Bandwidth (MHz): | 100 |
Counter: | Yes |
DVM: | No |
Dimensions (L x W x H) (mm): | 127,3 x 384 x 208 |
Function generator: | AWG25MHz |
Interfaces: | USB, LAN |
Model: | MDO-2104EG |
Number of channels: | 4 |
Samplerate: | 1 GSa/s |
Screen size: | 20 cm |
Screen type: | 800 x 480, WVGA |
Segmentable memory: | Yes |
Signal acquisition rate: | 120.000 wfms/s |
Storage depth: | 10 MPts |
Triggertypes: | Edge, Pulse Width (Glitch), Video, Pulse Runt, Rise&Fall (Slope), Alternate, Time out, Event-Delay, Time-Delay, Bus |
Vertical resolution: | 8-bit |
Warranty (years): | 3 |
Weight (kg): | 3 |
Documents & Downloads
Description
MDO-2104EG | Oscilloscope, 4 channel, spectrum analyzer, 100 MHz, 1 GSa / s, 10 MPts, USB, LAN, working gen.
The MDO-2000E series oscilloscope offers a bandwidth of 100 MHz and a real-time sampling rate of 1 GSa / s. The display and the 1 mV / div vertical resolution enable the MDO-2000E series to measure complex and weak signals and to present the clear measurement results.
The multi-domain oscilloscopes of the MDO-2000E series offer a memory depth of an unbelievable 10 Mpts as standard in order to completely retrieve and analyze the signal. Depending on the measurement application, the memory depth can be set to 1 k, 10 k, 100 k, 1 M or 10 M. A short memory depth in connection with the high sampling rate enables the user to observe a rapidly changing curve shape and on the other hand, with the selection of a large memory depth, slowly changing curves can be verified continuously.
With the standard segmented memory function , the acquisition memory is max. 29,000 segments divided in order to optimally use the memory depth of 10 Mpts available to you. It can be triggered on waveforms that are of particular interest and saved in the segmented memory (you fill a segment with each trigger event). This increases the storage effectiveness enormously.
The MDO-2000E oscilloscope series is equipped with a "waveform search function" and a segmented memory to extend the signal observation time of the flexible 10 Mpts long memory. The segmented memory can be divided into 29,000 areas in order to bypass uninteresting signal sequences and to be able to search through all essential signal sequences. This allows important signal sequences to be displayed and saved. With the "waveform search function" users can quickly search the desired curves for the trigger conditions.
The MDO-2000E Mixed Domain Oscilloscope Series enables users to easily and fully observe the turn-on behavior and rare transient waveforms. This makes waveform debugging easier by using the advanced VPO (Visual Persistence Oscilloscope) signal processing technology , which achieves a signal update of 120,000 wfm / s and writes these respective waveforms on the screen for a multi-layer signal display and thus an improved display to reach the signals. Oscilloscopes with VPO technology display the signals in a 3-dimensional arrangement of amplitude, time and signal strength for each signal point. 256 different colors indicate signal changes. Compared to a conventional digital storage oscilloscope, the MDO-2000E series offers much more natural and real displays that correspond to the real signal.
Integrated spectrum analyzer
If you use the spectrum analyzer mode, the frequency level is shown on the display. Users can enter various characteristic parameters, depending on the application requirements, such as B. Display center frequency, displayed frequency range (span), start frequency and stop frequency. This allows the required frequency range to be examined very quickly and intuitively. The user interface corresponds to a real spectrum analyzer.
Signal characteristics and components can be identified much more easily in the frequency level than in the time level. So z. B. the composition of the signal harmonics or the frequency characteristic of a modulation signal.
Accessoires (11 products )
Alternate products (16 products )
Recommendations (3 products )
Offers (1 product )
About the Manufacturer
Good Will has been listed on the Taiwan Stock Exchange since 2000. Development and production focus on high quality and low cost measuring instruments for production, laboratory and education. Headquartered in Taipei, Good Will has subsidiaries in China, America, Japan, Korea and Malaysia. The products are sold in over 80 countries.