GW Instek MDO-2102EX | Oscilloscope, 2 channel, spectrum analyzer, DMM, NG 100 MHz, 1 GSa / s, 10 MPts, USB, LAN, working gen.

Manufacturer number: MDO-2102EX

GW Instek MDO2102EX | 2-channel multi-function and mixed-domain oscilloscope with a bandwidth of 100 MHz, with integrated spectrum analyzer DC - 500 MHz, 2-channel arbitrary generator 25 MHz, 2-channel power supply 5 V / 1 A DC and one digital -Multimeter with 5,000 digits.

  • Bandwidth: 100 MHz
  • 2 channels
  • Maximum real time sampling rate: 1 GSa / s
  • Memory depth 10 MPoints per channel
  • Segmented memory: can be divided into 29,000 areas
  • VPO (Visual Persistence Oscilloscope) Waveform Display Technology for more signal information similar like with analog oscilloscopes
  • Signal acquisition rate up to 120,000 wfs / s
  • 38 automated measurements
  • Built-in spectrum analyzer with 0 to 500 MHz bandwidth
  • FFT function: A maximum of 1M FFT produces higher measurement resolution in the frequency domain
  • High pass, low pass and band pass filter functions
  • Decoding and trigger function for serial buses like: I²C / SPI / UART / CAN / LIN
  • Mask test
  • Frequency Response Analyzer FRA (Bode Plot) application (from firmware V1.34 or later)
  • Data logger function can record signal changes up to 1,000 hours
  • Built-in AWG arbitrary generator : Two-channel, 25 MHz, 200 MSa / s, 14 bit, memory depth 16 k points
  • Standard waveforms: sine (25 MHz), rectangle (15 MHz), pulse, ramp (1 MHz), DC, noise, Lorentz, exponential rising edge, exponential falling edge, Haversine and cardiogram function
  • Digital multi-meter with 5,000 digits (MDO-2000EX)
  • Two-channel power supply with 5V / 1A DC each (MDO-2000EX)
  • Display: approx. 20 cm screen diagonal (8 inch) WVGA TFT LCD display
  • Network storage function
  • Interfaces: High Speed USB, Host Port, Lan, Go / NoGo-BNC
  • Dimensions: W 384 x H 208 x D 127.3 mm
  • Weight: approx. 3 kg
  • Warranty: 3 years
Standard accessories:
  • Power cord, calibration certificate, CD-ROM (with brief instructions, operating instructions, programming manual
  • One passive probe per channel
  • GTL-110 BNC to BNC cable
  • GTL-105A test lead with alligator clip (only with MDO-2000EX)
  • GTL-207 test lead with banana plug (only with MDO-2000EX)

Manufacturer-independent

Wide variety of brands from dataTec.

To the brands

Large product portfolio

All the highlights of dataTec Switzerland at a glance.

Download here

Demonstration & Consulting

Sales and technical support close to you.

Start request

Technical Data

Documents & Downloads

Description

MDO-2102EX | Oscilloscope, 2 channel, spectrum analyzer, DMM, NG 100 MHz, 1 GSa / s, 10 MPts, USB, LAN, working gen.

The MDO-2000E series oscilloscope offers a bandwidth of 100 MHz and a real-time sampling rate of 1 GSa / s. The display and the 1 mV / div vertical resolution enable the MDO-2000E series to measure complex and weak signals and to present the clear measurement results.

The multi-domain oscilloscopes of the MDO-2000E series offer a memory depth of an unbelievable 10 Mpts as standard in order to completely retrieve and analyze the signal. Depending on the measurement application, the memory depth can be set to 1 k, 10 k, 100 k, 1 M or 10 M. A short memory depth in connection with the high sampling rate enables the user to observe a rapidly changing curve shape and on the other hand, with the selection of a large memory depth, slowly changing curves can be verified continuously.

With the standard segmented memory function , the acquisition memory is max. 29,000 segments divided in order to optimally use the memory depth of 10 Mpts available to you. It can be triggered on waveforms that are of particular interest and saved in the segmented memory (you fill a segment with each trigger event). This increases the storage effectiveness enormously.

The MDO-2000E oscilloscope series is equipped with a "waveform search function" and a segmented memory to extend the signal observation time of the flexible 10 Mpts long memory. The segmented memory can be divided into 29,000 areas in order to bypass uninteresting signal sequences and to be able to search through all essential signal sequences. This allows important signal sequences to be displayed and saved. With the "waveform search function" users can quickly search the desired curves for the trigger conditions.

The MDO-2000E Mixed Domain Oscilloscope Series enables users to easily and fully observe the turn-on behavior and rare transient waveforms. This makes waveform debugging easier by using the advanced VPO (Visual Persistence Oscilloscope) signal processing technology , which achieves a signal update of 120,000 wfm / s and writes these respective waveforms on the screen for a multi-layer signal display and thus an improved display to reach the signals. Oscilloscopes with VPO technology display the signals in a 3-dimensional arrangement of amplitude, time and signal strength for each signal point. 256 different colors indicate signal changes. Compared to a conventional digital storage oscilloscope, the MDO-2000E series offers much more natural and real displays that correspond to the real signal.

Integrated spectrum analyzer

If you use the spectrum analyzer mode, the frequency level is shown on the display. Users can enter various characteristic parameters, depending on the application requirements, such as B. Display center frequency, displayed frequency range (span), start frequency and stop frequency. This allows the required frequency range to be examined very quickly and intuitively. The user interface corresponds to a real spectrum analyzer.
Signal characteristics and components can be identified much more easily in the frequency level than in the time level. So z. B. the composition of the signal harmonics or the frequency characteristic of a modulation signal.

Accessoires (11 products)

GCP-1030
GW Instek
GCP-1030
Current clamp, BNC, 50A DC-100MHz, requires power supply GCP-206P / 425P
Delivery time upon request
CHF 4,885.00
GCP-206P
GW Instek
GCP-206P
Power supply, 2 channels for current clamps of the GCP series
Delivery time upon request
CHF 884.00
GCP-425P
GW Instek
GCP-425P
Power supply, 4 channel for current clamps of the GCP series
Delivery time upon request
CHF 1,318.00
GTL-246
GW Instek
GTL-246
USB cable type A to type B 1.2m for GDS / GLA / GSP / GPD / GLC9000 / AFG2000 / 3000 / PEL
Delivery time upon request
CHF 11.00
GSC-008
GW Instek
GSC-008
Carrying case for oscilloscope of the GDS-3000 series GDS-2000A / E, GDS-1000B and MSO / MDO -2000 series
Delivery time upon request
CHF 125.00
GCP-020
GW Instek
GCP-020
Current clamp, BNC, 600A 40Hz-40kHz
Delivery time upon request
CHF 518.00
GCP-530
GW Instek
GCP-530
Current clamp, BNC, 50A DC-50MHz, requires power supply GCP-206P / 425P
Delivery time upon request
CHF 3,493.00
GDB-03
GW Instek
GDB-03
Oscilloscope training and education kit for GDS-2000A / GDS-3000 oscilloscopes
Delivery time upon request
CHF 293.00
GDP-025
GW Instek
GDP-025
Probe, active, differential, ± 1400V 20X, 15MHz / 50X, 200X, 25MHz, BNC
Delivery time upon request
CHF 277.00
GDP-050
GW Instek
GDP-050
Probe, active, differential, ± 7000V 100X, 25MHz / 200X, 500X, 1000X, 50MHz, BNC
Delivery time upon request
CHF 469.00
GRA-426
GW Instek
GRA-426
19 inch rack, 6U, with handles for GDS-2000E, GDS-1000B and MDO series
Delivery time upon request
CHF 168.00

Alternate products (14 products)

MSO-2202EA
GW Instek
MSO-2202EA
Oscilloscope, 2 + 16 channels with 2 channels AFG 200 MHz, 1 GSa / s, 120,000 wfm / s, 10 MPts, USB, LAN
Delivery time upon request
CHF 1,928.00
MSO-2104EA
GW Instek
MSO-2104EA
Oscilloscope, 4 + 16 channels with 2 channels AFG 100 MHz, 1 GSa / s, 120,000 wfm / s, 10 MPts, USB, LAN
Ready to ship in 5 to 10 business days
CHF 2,033.00
MDO-2074EX 4-channel oscilloscope / spectrum analyzer
GW Instek
MDO-2074EX 4-channel oscilloscope / spectrum analyzer
Ready to ship in 5 to 10 business days
CHF 1,695.00
MDO-2102EG
GW Instek
MDO-2102EG
Oscilloscope, 2-channel, spectrum analyzer, 100 MHz, 1 GSa / s, 10 MPts, USB, LAN, working gen.
Delivery time upon request
CHF 1,252.00
MDO-2202EX
GW Instek
MDO-2202EX
Oscilloscope, 2 channel, spectrum analyzer, DMM, NG 200 MHz, 1 GSa / s, 10 MPts, USB, LAN, working gen.
Delivery time upon request
CHF 1,798.00
MDO-2204EG
GW Instek
MDO-2204EG
Oscilloscope, 4-channel, spectrum analyzer, 200 MHz, 1 GSa / s, 10 MPts, USB, LAN, working gen.
Delivery time upon request
CHF 1,948.00
MSO-2072EA
GW Instek
MSO-2072EA
Oscilloscope, 2 + 16 channels with 2 channels AFG 70 MHz, 1 GSa / s, 120,000 wfm / s, 10 MPts, USB, LAN
Delivery time upon request
CHF 1,325.00
MDO-2104EG
GW Instek
MDO-2104EG
Oscilloscope, 4 channel, spectrum analyzer, 100 MHz, 1 GSa / s, 10 MPts, USB, LAN, working gen.
Delivery time upon request
CHF 1,766.00
MDO-2202EG
GW Instek
MDO-2202EG
Oscilloscope, 2 channels, spectrum analyzer, 200 MHz, 1 GSa / s, 10 MPts, USB, LAN, working gen.
Delivery time upon request
CHF 1,660.00
MDO-2104EX
GW Instek
MDO-2104EX
Oscilloscope, 4 channel, spectrum analyzer, DMM, NG 100 MHz, 1 GSa / s, 10 MPts, USB, LAN, working gen.
Delivery time upon request
CHF 1,905.00
MSO-2074EA
GW Instek
MSO-2074EA
Oscilloscope, 4 + 16 channels with 2 channels AFG 70 MHz, 1 GSa / s, 120,000 wfm / s, 10 MPts, USB, LAN
Delivery time upon request
CHF 1,810.00
MSO-2102EA
GW Instek
MSO-2102EA
Oscilloscope, 2 + 16 channels with 2 channels AFG 100 MHz, 1 GSa / s, 120,000 wfm / s, 10 MPts, USB, LAN
Delivery time upon request
CHF 1,520.00
MDO-2102EX
GW Instek
MDO-2102EX
Oscilloscope, 2 channel, spectrum analyzer, DMM, NG 100 MHz, 1 GSa / s, 10 MPts, USB, LAN, working gen.
Delivery time upon request
CHF 1,391.00
MDO-2204EX
GW Instek
MDO-2204EX
Oscilloscope, 4-channel, spectrum analyzer, DMM, NG 200 MHz, 1 GSa / s, 10 MPts, USB, LAN, working gen.
Delivery time upon request
CHF 2,088.00

Recommendations (3 products)

GPS-4303 DC power supply, 4-channel
GW Instek
GPS-4303 DC power supply, 4-channel
3 in stock. Ready to ship in 1 business day
CHF 419.00
HMP4040
Rohde&Schwarz
HMP4040
Bundle DC power supply, 4-channel, 384 W (3629.6776.04)
21 in stock. Ready to ship in 1 business day
CHF 2,577.00
893-350-006
PMK
893-350-006
3D measuring stand MSU1500, 200mm arm, steel base, UNIHOLDER
5 in stock. Ready to ship in 1 business day
CHF 508.00

About the Manufacturer

GW Instek
GW Instek was founded in 1975 as Good Will Co. Ltd in Taiwan. Since the beginning, the company has specialized in the development and production of electronic test and measurement equipment. The first product focus was power supplies. Today, Good Will has more than 300 different products from the fields of oscilloscopes, spectrum analyzers, signal generators, digital multimeters and LCR measuring instruments in its program.

Good Will has been listed on the Taiwan Stock Exchange since 2000. Development and production focus on high quality and low cost measuring instruments for production, laboratory and education. Headquartered in Taipei, Good Will has subsidiaries in China, America, Japan, Korea and Malaysia. The products are sold in over 80 countries.

Last Seen Products

Product added to compare
Product Compare added Product Compare