GW Instek GPP-4323 | DC power supply, 4-channel, load function (CC, CV and CR)

Name: GPP-4323 | DC power supply, 4-channel, load function (CC, CV and CR)
Brand: GW Instek
SKU: GPP-4323
Price: 641.7 CHF
Availability: OutOfStock

Manufacturer number: GPP-4323

Reordered - in stock. Delivery time on request

CHF 641.70

% CHF 713.00 (10% saved)

plus VAT. CHF 693.68 VAT plus shipping costs

or choose one of the following options:

Product inquiries Request education-price

GW Instek GPP-4323 | DC power supply with load function, 4 channels, 2x 0 - 32 V / 0 - 3 A, 1x 0 - 5 V / 0 - 1 A, 1x 0 - 15 V / 0 - 1 A, comfortable tracking mode for max. 64 V / 6 A in series and parallel operation (channel 1 + 2), programmable.

Linear DC power supply, 4 channels: 2x 0 - 32 V / 0 - 3 A, 1x 0 - 5 V / 0 - 1 A, 1x 0 - 15 V / 0 - 1 A
Comfortable tracking mode for max. 64 V / 6 A in series and parallel operation (channel 1 + 2)
With load function including CC, CV, CR operation for battery discharge tests
Clear 4.3-inch display (10.9 cm screen diagonal) for optimal readability and monitoring of the measurement process
High resolution: Setting 1 mV / 0.1 mA, readback 0.1 mV / 0.1 mA
Low ripple and low noise: max. 350 µVrms / 2 mArms (at constant voltage, 5 Hz - 1 MHz)
Very fast settling behavior: max. 50 µs
Integrated protective devices against overvoltage (OVP), overcurrent (OCP) and overheating (OTP)
Output monitoring with alarm and measurement stop function to protect the DUT
Output control ON / OFF with adjustable delay
Sequence function for individual output signal forms or for dynamic load simulation
8 pre-programmed waveforms facilitate the setting: sine, pulse, square, ramp, stairs up / down / up-down, exponential decrease
Logging of the output parameters: min. Recording interval 1 s, max. Recording interval 300 s
Storage of up to 10 sequence / delay / recording settings, data transfer possible via USB stick
Trigger IN / OUT functions for synchronization with external devices
Temperature controlled ventilation to minimize noise
Interfaces: RS-232, USB / optional: LAN, GPIB + LAN
Dimensions: W 213 x H 145 x D 312 mm / weight: 7.5 kg

Manufacturer-independent

Wide variety of brands from dataTec.

To the brands

Large product portfolio

All the highlights of dataTec Switzerland at a glance.

Download here

Demonstration & Consulting

Sales and technical support close to you.

Start request

Technical Data

AC input:	100 V / 120 V / 220 V / 230 V
Additional functions:	CV / CC / CR
Article number:	01PP432330GS
Autorange:	No
Bidirectional:	No
DC output reversible:	DC Source
Dimensions (L x W x H) (mm):	312 x 213 x 145
Interfaces:	USB, RS-232 Optional: LAN, LAN and GPIB
Model:	GPP-4323
Number of outputs:	4
Output power (kW):	0.217
Protective devices:	OVP, OCP, OPP, OTP
Weight (kg):	7.5
max. Power (A):	3
max. Voltage (V):	32

Documents & Downloads

Datasheet

pdf | 2.14 MB

Description

GPP-4323 | DC power supply, 4-channel, load function (CC, CV and CR)

The measurement strengths of the DC source GPP-4323 from GW Instek lie in the high resolution (setting 1 mV / 0.1 mA and readback 0.1 mV / 0.1 mA), in the optimal residual ripple (max. 350 µVrms / 2 mArms) and particularly fast settling behavior (max. 50 µs). The large 4.3-inch display allows optimal monitoring of the measuring processes and offers clear display modes for the device settings, measured values and output functions.

The monitor function of the GPP series enables the user to define control conditions for a measurement process. An alarm and cancel function reliably protect your DUT from damage. With the sequence function, both the output signal shape can be determined and the sequential power output can be set in constant current (CC) or constant voltage (CV) mode, e.g. B. for dynamic load simulation. Eight preset curve functions for sine, pulse, rectangle, ramp, stairs up / down / up-down and exponential decrease make the setting easier for you. The commands of the GPP series comply with the SCPI requirements and are compatible with the commands of the GPD-X303S series.

The intelligent tracking function of the DC power source GPP-4323 supports the automated series and parallel operation of channels 1 and 2 without further cabling. This guarantees you not only a particularly convenient device operation, but also a more stable power output of up to 64 V and 6 A compared to parallel and series connection with external wires.

Channels 1 and 2 are also equipped with a load function: With just a single power supply unit, you can use one channel for power delivery and simultaneously use the second channel to turn the device into an electronic load that absorbs the power of the DUT. In this way, you can, for example, meet the basic test requirements for battery charge and discharge tests.

Lieferumfang

operating manual
Power cord
2x GTL-105A test leads (max. 3 A)
2x GTL-104A test leads (max. 10 A)

Alternate products (11 products )

GW Instek GPP-3323

DC power supply, 3-channel, load function (CC, CV and CR)

Delivery time upon request

CHF 604.80 CHF 672.00

GW Instek GPP-2323

DC power supply, 2-channel, load function (CC, CV and CR)

Delivery time upon request

CHF 541.80 CHF 602.00

GW Instek GPP-1326

DC power supply, 1-channel, load function (CC, CV and CR)

Delivery time upon request

CHF 504.90 CHF 561.00

GW Instek GPP-3060

Programmable 3-channel DC power supply with load function, 2x30V / 6A, 1x5V / 5A, 385W [...] RS-232, USB, LAN, Ext I / O

1 in stock. Ready to ship in 1 business day

CHF 976.50 CHF 1,085.00

GW Instek GPP-3060-GPIB

Programmable 3-channel DC power supply with load function, 2x30V / 6A, 1x5V / 5A, 385W, RS-232, USB, LAN, Ext I / O, GPIB

Delivery time upon request

CHF 1,086.30 CHF 1,207.00

GW Instek GPP-6030

Programmable 3-channel DC power supply with load function, 2x60V / 3A, 1x5V / 5A, 385W, RS-232, USB, LAN, Ext I / O

Delivery time upon request

CHF 976.50 CHF 1,085.00

GW Instek GPP-6030-GPIB

Programmable 3 channel DC power supply with load function, 2x60V / 3A, 1x5V / 5A, 385W, RS-232, USB, LAN, Ext I / O, GPIB