Go to homepage
  Quickly and Easily Request a Quote!
  Free Shipping for Orders higher than 50€!
  Independent Consulting!

Product Comparison 0

Shopping Cart
Show all categories Power Supplies 21 … 40 V DC Back

GW Instek GPP-3323 | DC power supply, 3-channel, load function (CC, CV and CR)

Manufacturer number: GPP-3323

GW Instek GPP-3323
GW Instek GPP-3323
GW Instek GPP-3323
GW Instek GPP-3323
Delivery time upon request

CHF 604.80

% CHF 672.00 (10% saved)

plus VAT. CHF 653.79 VAT plus shipping costs

or choose one of the following options:
Product downloads Product inquiries Request education-price
Highlights Technical Data Documents / Downloads Description Scope Related Articles

GW Instek GPP-3323 | DC power supply with load function, 3 channels, 2x 0 - 32 V / 0 - 3 A, 1x 1.8 V / 2.5 V / 3.3 V / 5 V and 5 A, comfortable tracking mode for max. 64 V / 6 A in series and parallel operation (channel 1 + 2), programmable.

  • Linear DC power supply, 3 channels: 2x 0 - 32 V / 0 - 3 A, 1x 1.8 V / 2.5 V / 3.3 V / 5 V and 5 A
  • Comfortable tracking mode for max. 64 V / 6 A in series and parallel operation (channel 1 + 2)
  • With load function including CC, CV, CR operation for battery discharge tests
  • Clear 4.3-inch display (10.9 cm screen diagonal) for optimal readability and monitoring of the measurement process
  • High resolution: Setting 1 mV / 0.1 mA, readback 0.1 mV / 0.1 mA
  • Low ripple and low noise: max. 350 µVrms / 2 mArms (at constant voltage, 5 Hz - 1 MHz)
  • Very fast settling behavior: max. 50 µs
  • Integrated protective devices against overvoltage (OVP), overcurrent (OCP) and overheating (OTP)
  • Output monitoring with alarm and measurement stop function to protect the DUT
  • Output control ON / OFF with adjustable delay
  • Sequence function for individual output signal forms or for dynamic load simulation
  • 8 pre-programmed waveforms facilitate the setting: sine, pulse, square, ramp, stairs up / down / up-down, exponential decrease
  • Logging of the output parameters: min. Recording interval 1 s, max. Recording interval 300 s
  • Storage of up to 10 sequence / delay / recording settings, data transfer possible via USB stick
  • Trigger IN / OUT functions for synchronization with external devices
  • Temperature controlled ventilation to minimize noise
  • Interfaces: RS-232, USB / optional: LAN, GPIB + LAN
  • With additional 3A-USB output terminal for USB charging tests
  • Dimensions: W 213 x H 145 x D 312 mm / weight: 7.5 kg

Manufacturer-independent

Wide variety of brands from dataTec.

To the brands

Large product portfolio

All the highlights of dataTec Switzerland at a glance.

Download here

Demonstration & Consulting

Sales and technical support close to you.

Start request

Technical Data

Documents & Downloads

Datasheet
pdf | 2.14 MB

Description

GPP-3323 | DC power supply, 3-channel, load function (CC, CV and CR)

The measurement strengths of the DC source GPP-3323 from GW Instek lie in the high resolution (setting 1 mV / 0.1 mA and readback 0.1 mV / 0.1 mA), in the optimal residual ripple (max. 350 µVrms / 2 mArms) and particularly fast settling behavior (max. 50 µs). The large 4.3-inch display allows optimal monitoring of the measuring processes and offers clear display modes for the device settings, measured values and output functions.

The monitor function of the GPP series enables the user to define control conditions for a measurement process. An alarm and cancel function reliably protect your DUT from damage. With the sequence function, both the output signal shape can be determined and the sequential power output can be set in constant current (CC) or constant voltage (CV) mode, e.g. B. for dynamic load simulation. Eight preset curve functions for sine, pulse, rectangle, ramp, stairs up / down / up-down and exponential decrease make the setting easier for you. The commands of the GPP series comply with the SCPI requirements and are compatible with the commands of the GPD-X303S series.

The intelligent tracking function of the DC power source GPP-3323 supports the automated series and parallel operation of channels 1 and 2 without further cabling. This guarantees you not only a particularly convenient device operation, but also a more stable power output of up to 64 V and 6 A compared to parallel and series connection with external wires.

Channels 1 and 2 are also equipped with a load function: With just a single power supply unit, you can use one channel for power delivery and simultaneously use the second channel to turn the device into an electronic load that absorbs the power of the DUT. In this way, you can, for example, meet the basic test requirements for battery charge and discharge tests.

Lieferumfang

  • operating manual
  • Power cord
  • 3x GTL-104A test leads (max. 10 A)

Alternate products (11 products )

GW Instek GPP-4323
GW Instek GPP-4323
DC power supply, 4-channel, load function (CC, CV and CR)
Reordered - in stock. Delivery time on request
CHF 641.70 CHF 713.00
GW Instek GPP-2323
GW Instek GPP-2323
DC power supply, 2-channel, load function (CC, CV and CR)
Delivery time upon request
CHF 541.80 CHF 602.00
GW Instek GPP-1326
GW Instek GPP-1326
DC power supply, 1-channel, load function (CC, CV and CR)
Delivery time upon request
CHF 504.90 CHF 561.00
GW Instek GPP-3060
GW Instek GPP-3060
Programmable 3-channel DC power supply with load function, 2x30V / 6A, 1x5V / 5A, 385W [...] RS-232, USB, LAN, Ext I / O
1 in stock. Ready to ship in 1 business day
CHF 976.50 CHF 1,085.00
GW Instek GPP-3060-GPIB
GW Instek GPP-3060-GPIB
Programmable 3-channel DC power supply with load function, 2x30V / 6A, 1x5V / 5A, 385W, RS-232, USB, LAN, Ext I / O, GPIB
Delivery time upon request
CHF 1,086.30 CHF 1,207.00
GW Instek GPP-6030
GW Instek GPP-6030
Programmable 3-channel DC power supply with load function, 2x60V / 3A, 1x5V / 5A, 385W, RS-232, USB, LAN, Ext I / O
Delivery time upon request
CHF 976.50 CHF 1,085.00
GW Instek GPP-6030-GPIB
GW Instek GPP-6030-GPIB
Programmable 3 channel DC power supply with load function, 2x60V / 3A, 1x5V / 5A, 385W, RS-232, USB, LAN, Ext I / O, GPIB
Ready to ship in 5 to 10 business days
CHF 1,086.30 CHF 1,207.00
GW Instek GPP-4323L
GW Instek GPP-4323L
DC power supply, 4-channel, 2x 32V/3A, 5V/1A, 15V/1A, 217W, incl. load function (CC, CV and CR), incl. LAN
Delivery time upon request
CHF 681.30 CHF 757.00
GW Instek GPP-2323L
GW Instek GPP-2323L
DC power supply, 2-channel, 2x 32V/2A, 192W, incl. load function (CC, CV and CR), incl. LAN
Ready to ship in 5 to 10 business days
CHF 581.40 CHF 646.00
GW Instek GPP-2323LG
GW Instek GPP-2323LG
DC power supply, 2-channel, 2x 32V/2A, 192W, incl. load function (CC, CV and CR), incl. LAN & GPIB
Ready to ship in 5 to 10 business days
CHF 724.50 CHF 805.00
GW Instek GPP-4323LG
DC power supply, 4-channel, 2x 32V/3A, 5V/1A, 15V/1A, 217W, incl. load function (CC, CV and CR), incl. LAN & GPIB
Delivery time upon request
CHF 824.40 CHF 916.00

Recommendations (2 products )

GW Instek GPP-3323L
GW Instek GPP-3323L
DC power supply, 3-channel, 2x 32V/3A, 5V/5A, 217W, incl. load function (CC, CV and CR), incl. LAN
Ready to ship in 5 to 10 business days
CHF 644.40 CHF 716.00
GW Instek GPP-3323LG
GW Instek GPP-3323LG
DC power supply, 3-channel, 2x 32V/3A, 5V/5A, 217W, incl. load function (CC, CV and CR), incl. LAN & GPIB
Ready to ship in 5 to 10 business days
CHF 788.40 CHF 876.00

News and Knowledge

Modern applications for power supplies.

Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...

17/03/2021
Reading time 5 Min.
252
0

About the Manufacturer

GW Instek
GW Instek
GW Instek was founded in 1975 as Good Will Co. Ltd in Taiwan. Since the beginning, the company has specialized in the development and production of electronic test and measurement equipment. The first product focus was power supplies. Today, Good Will has more than 300 different products from the fields of oscilloscopes, spectrum analyzers, signal generators, digital multimeters and LCR measuring instruments in its program.

Good Will has been listed on the Taiwan Stock Exchange since 2000. Development and production focus on high quality and low cost measuring instruments for production, laboratory and education. Headquartered in Taipei, Good Will has subsidiaries in China, America, Japan, Korea and Malaysia. The products are sold in over 80 countries.
Read more

Last Seen Products

Product added to compare
Product Compare added Product Compare