GW Instek GLN-5040A | V-two-wire network simulation (LISN), 16 A, 9 kHz - 30 MHz

Manufacturer number: GLN-5040A

Manufacturer-independent

Wide variety of brands from dataTec.

To the brands

Large product portfolio

All the highlights of dataTec Switzerland at a glance.

Download here

Demonstration & Consulting

Sales and technical support close to you.

Start request

Detaildescription

GLN-5040A | V-two-wire network simulation (LISN), 16 A, 9 kHz - 30 MHz

The two-wire V-network simulation GLN-5040A is required for EMI tests. Radio interference voltages that are generated by electrical consumers and reach the mains via the power cord can be verified with the help of network simulations and spectrum analyzers / measurement receivers. The GLN-5040A offers a stable impedance for the supply lines of the device under test and with a ground reference within the guided emission range of the DUT (Device Under Test). The GLN5040A isolates the unwanted signals from the supply network or from the power supply unit for supplying the DUT and only couples the voltage disturbances of the device to be measured to the receiver (e.g. network or spectrum analyzer). The GLN5040A meets the requirements of CISPR16-1-2 for V networks with a simulated impedance of 50 µH + 5 Ω || 50 Ω in a frequency range from 9 kHz to 30 MHz. The output impedance is 50 Ω on a BNC connector to achieve impedance matching with spectrum analyzers and other measurement equipment.

A 9 kHz to 150 kHz high-pass filter can be selected by hand, which means that the correct filter can be used for the respective standards. The GLN-5040A is also suitable for measuring the interference voltage on the phases of the device cable.

A large leakage current can occur due to design principles. It is therefore advisable to ground the device during use and, if necessary, to operate it with an isolation transformer. The isolation transformer GIT-5060 delivers an output power of 900 VA and should therefore cover most measuring situations for devices to be measured.

Lieferumfang

  • BNC cable 2m
  • GLN5040A basic device
  • Schuko to GB socket
  • BNC lead
  • Adapter BNC plug to type N plug
  • operation manual
  • Warranty card
  • Test report

Accessoires (4 products )

Accessoires (4 products )

GW Instek GIT-5060
Isolating transformer, 900VA, 250 V, 4 A, 50-60 Hz
Delivery time upon request
CHF 949.00
GW Instek GSP-9300B
Spectrum analyzer, 9 kHz - 3 GHz, LAN / USB / RS-232, AM / FM, -122 to +33 dBm
1 in stock. Ready to ship in 1 business day
CHF 3,362.00
Exclusive
GW Instek GSP-9330
Spectrum analyzer, 9 kHz - 3.25 GHz, LAN / USB / RS-232, AM / FM / ASK / FSK, -122 to +33 dBm
Delivery time upon request
CHF 5,605.00
GW Instek GPL-5010
GW Instek GPL-5010 transient limiter, 9 kHz - 200 MHz, max. 2.5 W input power, BNC input on output type-N
Delivery time upon request
CHF 607.00

About the Manufacturer

GW Instek
GW Instek was founded in 1975 as Good Will Co. Ltd in Taiwan. Since the beginning, the company has specialized in the development and production of electronic test and measurement equipment. The first product focus was power supplies. Today, Good Will has more than 300 different products from the fields of oscilloscopes, spectrum analyzers, signal generators, digital multimeters and LCR measuring instruments in its program.

Good Will has been listed on the Taiwan Stock Exchange since 2000. Development and production focus on high quality and low cost measuring instruments for production, laboratory and education. Headquartered in Taipei, Good Will has subsidiaries in China, America, Japan, Korea and Malaysia. The products are sold in over 80 countries.

Last Seen Products

Product added to compare
Product Compare added Product Compare