GW Instek GDS-1104B | Oscilloscope, 4 channel 100 MHz, 1 GSa / s, 50,000 wfm / s, 10 MPts, USB, LAN
Manufacturer number: GDS-1104B
GW Instek GDS-1104B | Oscilloscope, 4 channel 100 MHz, 1 GSa / s, 50,000 wfm / s, 10 MPts, USB, LAN.
- Bandwidth: 100 MHz
- 4 channels
- Maximum sampling rate: 1 GHz / s
- Standard 10 MPts memory
- VPO (Visual Persistence Oscilloscope) Waveform Display Technology for more signal information similar like with analog oscilloscopes
- WVGA LCD display with a resolution of 800 x 480 pixels, screen diagonal: 17.8 cm (7 inches), 256 color gradients
- 1 MPoint FFT for frequency analysis
- Zero key function for horizontal, vertical deflection and triggering
- 36 automatic measurements
- Go / NoGo function (mask test)
- Digital volt meter function
- Data logging function
- Integrated counter
- Interfaces: USB Port: USB 2.0 High-speed host port X1, USB High-speed 2.0 device port X1, Ethernet (LAN) RJ-45, Go-NoGo: BNC
- Dimensions: W 380 mm × H 208 mm × D 127.3 mm
- Weight: 2.8 kg
- Incl. Accessories: 1x user manual, 1x power cord, 1x 100MHz passive probe 10: 1/1: 1 per channel
- 2 year guarantee
Technical Data
Article number: | 01DS114B10GT |
---|---|
Bandwidth (MHz): | 100 |
Counter: | Yes |
DVM: | Yes |
Dimensions (L x W x H) (mm): | 127 x 380 x 208 |
Function generator: | No |
Interfaces: | USB, LAN |
Model: | GDS-1104B |
Number of channels: | 4 |
Samplerate: | 1 GSa/s |
Screen size: | 17,8 cm |
Screen type: | 800 x 480, WVGA LCD Display |
Signal acquisition rate: | 50.000 wfms/s |
Storage depth: | 10 MPts |
Triggertypes: | Edge, Pulse width, Video, Pulse Runt, Rise&Fall, Timeout, Alternate, Event-Delay, Time-Delay |
Vertical resolution: | 8-bit |
Warranty (years): | 2 |
Weight (kg): | 2.8 |
Documents & Downloads
Description
GDS-1104B | Oscilloscope, 4 channel 100 MHz, 1 GSa / s, 50,000 wfm / s, 10 MPts, USB, LAN
The GDS-1000B series oscilloscopes offer accurate signal reproduction at a very low price. Accuracy provides users with better insight into error problems. The GDS1000B oscilloscope series is designed for general applications with measurements of signal parameters, cursor information, digital voltmeters and data logger functions. With this configuration, many oscilloscopes in the same category of other competitors are outperformed. All applications of this oscilloscope series GDS-1000B can be used very well in the training area as well as in the development laboratories.
The maximum sampling rate for each channel is 1 GS / s and the memory depth is 10 MPoints per channel. The update rate for the curve shapes shown is 50,000 wfm / s. This makes variations in the curve shape visible. The 18 cm (7 inch) WVGA color display with 256 color gradients enables curve shapes to be observed in connection with transparent and color gradients.
In addition to the adjustment knobs for horizontal and vertical scaling, GW INSTEK offers a sophisticated design such as: B. the zero function, which makes it easier for engineers to use measurement work more efficiently.
A 1 MP point FFT is integrated for mathematical analysis, which makes frequency analysis of the recorded data much more precise and efficient. Many trigger functions and displays in xy mode as well as Go / NoGo tests can be carried out with the GDS-1000B series.
With the OpenWave software, the oscilloscopes of this series can be connected to a PC, where the measured curve shape can be analyzed and saved on the PC.
Note:
The GW Instek GDS-1000B series oscilloscopes now include I²C, SPI, UART, CAN, LIN trigger and decode as standard. Older devices can be upgraded free of charge via firmware update.
About the Manufacturer
Good Will has been listed on the Taiwan Stock Exchange since 2000. Development and production focus on high quality and low cost measuring instruments for production, laboratory and education. Headquartered in Taipei, Good Will has subsidiaries in China, America, Japan, Korea and Malaysia. The products are sold in over 80 countries.