Gossen Metrawatt M536P | Profitest MTECH+ IQ master package VDE 0100 stationary test device
Manufacturer number: M536P
Gossen Metrawatt M536P | Master package - Profitest Tech+ IQ test device, VDE 0100 / IEC 60364.6, complete with Vario plug set, PROFI case, SP500 ground spike, TR 50 drum, PRO-RLO II adapter, battery set, charging power pack and a DAkkS (DKD) calibration protocol worth approx. EUR 180.-.
- Loop and line impedance measurement
- Measurement of insulation resistance with nominal voltage, with variable or increasing test voltage
- low-impedance measurement
- earth resistance measurement
- site isolation measurement
- Universal connection system
- Standard-compliant testing of e-charging stations according to IEC 61851 in conjunction with the Mennekes test box
- ProfiScan - App for Android smartphones and tablet PCs
Testing of residual current devices (RCD circuit breakers):
- Measuring touch voltage without tripping the switch.
Here, the touch voltage related to the nominal residual current is measured at 1/3 of the nominal residual current. - Tripping test with nominal residual current, measurement of tripping time
- Special tests of systems or RCD circuit breakers
- Testing of systems or RCD circuit breakers with increasing residual current with display of the tripping current and the contact voltage at the moment of tripping.
- Testing of RCD circuit breakers with: ½ × IΔN, 1× IΔN, 2× IΔN, 5× IΔN
- Testing of RCD circuit breakers suitable for pulsating DC fault currents; the test is carried out with positive or negative half-waves
- Testing of RCD circuit breakers with adjustable residual current to determine the contact voltage and the tripping current
- Checking special RCD circuit breakers
selective S, SRCDs, PRCDs (Schukomat, Sidos or similar), type G/R, AC, A, F, type B, B+, EV
Testing of residual current (RCD) protective circuits in IT networks
Particularities:
- EASY transfer stands for the direct integration of the Profitest Master test device into the CAD planning software from DDS-CAD.
- Display of permitted fuse types for electrical systems
Editable test sequences - Testing of the start-up of energy consumption meters
- Calculation of line lengths for common cross-sections of copper lines
- Measurement of bias, leakage and compensating currents up to 1 A and working currents up to 150 A using the WZ12C current clamp sensor as an accessory
- Measurement of the rotating field direction (phase sequence, highest phase-to-phase voltage)
- Measuring touch voltage without tripping the switch.
Here, the touch voltage related to the nominal residual current is measured at 1/3 of the nominal residual current. - Tripping test with nominal residual current, measurement of tripping time
Technical Data
All-current sensitive RCDs type B, B+: | Yes |
---|---|
Article number: | M536P |
Automatic test sequence: | Yes |
Check residual voltage: | Yes |
Counter start-up: | Yes |
DIN VDE 0100 / IEC 60364-6: | Yes |
Dimensions (L x W x H) (mm): | 260 x 330 x 90 |
Insulation measurement 50V: | Yes |
Insulation measurement 100V: | Yes |
Insulation measurement 250V: | Yes |
Insulation measurement 325V: | Yes |
Insulation measurement 500V: | Yes |
Insulation measurement 1000V: | Yes |
Interfaces: | USB |
Measured value memory: | 50000 |
Mobile: | Yes |
Model: | PROFITEST MTECH+ IQ Meisterpaket |
Rotating field direction: | Yes |
Selective, SRCDs, PRCDs, type G/R: | Yes |
Software included: | Izytroniq |
Stationary: | No |
Touch Display: | No |
Voltage drop: | Yes |
Warranty (years): | 10 |
Weight (kg): | 2.7 |
e-Mobility (prepared): | Yes |
Documents & Downloads
Description
M536P | Profitest MTECH+ IQ master package VDE 0100 stationary test device
The Gossen Metrawatt PROFITEST MTECH+IQ universal protective measure tester for electrical systems, which enables the electrician to take the necessary measurements according to VDE 0100 Part 600 and the corresponding international regulations for all initial acceptances, repeat tests, after repairs, E-Check, etc.
A wide-range measuring device enables the test device to be used for all AC and three-phase systems with voltages from 65 to 500 V and frequencies from 15.4 to 420 Hz.
Lieferumfang
- Test device Profitest M-Tech+ (complete basic device)
- Quick User Guide
- Operating Instructions (on CD-ROM)
- DAkkS (DKD) calibration certificate worth approx. EUR 180.-
- License code for logging software IZYTRONIQ BUSINESS Professional (can be downloaded from the Internet)
- Vario connector set
- PRO case
- Ground spike SP500
- Drum TR 50
- Adapter PRO-RLO II
- Battery set and charger
PC user software IZYTRONIQ:
- IZYTRONIQ is testing software that has been newly developed from the ground up
- Flexible, subsequently expandable software - adapt IZYTRONIQ to your individual requirements
- Map the entire test process across devices, manage and document in an audit-proof manner
- Combine measurement and test data from different test devices and multimeters into one test
- IZYTRONIQ automatically recognizes and manages the connected test devices. The software intelligently determines the range of functions available on your devices
- Optimized for both stationary and mobile use - create test documentation directly on site, without subsequent processing
- Intuitive operation, understandable and simple - intelligent marking and hiding of tools and workspaces
- Pioneering design with meaningful icons. Complex database connections are shown in simple tree structures
Accessoires (15 products )
Alternate products (4 products )
Recommendations (4 products )
News and Knowledge
dataTec unboxed is the new video series from dataTec for product presentations and news from the world of measurement an...